3M 2800 series Technical Datasheets

2. Marking The products have demonstrated compliance with the requirements of EN 166:2001 and associated standards and bear the following marks: Product ref Lens marking Frame marking 2800 2C-1.2 3M 1 FT 3M EN 166 FT CE 2801 5-3.1 3M 1 FT 3M EN 166 FT CE 2802 2-1.2 3M 1 FT 3M EN 166 FT CE 2805 4-5 3M 1 FT 3M EN 166 FT CE Note: The Welding Shade lens is marked 4-5 but has also demonstrated compliance with the requirements for welding shade 5. Explanation of marking Marking Description 2-1.2 and 2C-1.2 (EN 170:2002) UV protection. This product conforms to the requirements of the standard, providing UV protection for the complete specified range (210nm – 365nm). Products marked C provide good colour recognition 5-3.1 (EN172:1994 as amended) Sun-glare protection conforming to the requirements of the standard, providing UV protection for the complete specified range (280nm – 350nm) 4-5 (EN 171:2002) Infrared filter providing protection against IR protection for the specified range (780nm to 2000nm) 5 (EN 169:2002) Welding lens providing protection against UV for the specified range (210nm to 365nm) and IR protection for the specified range (780nm to 2000nm) 1 Optical class F Impact protection against high speed particle at low energy (45m/s) T Tested for impact protection at extreme temperature conditions: -5°C and +55°C 3M ™ Safety Over Spectacles 2800 Series Please recycle. Printed in the UK. © 3M 2020. 3M is a trademark of 3M Company. All rights reserved. OMG69675 IMPORTANT NOTICE The use of the 3M product described within this document assumes that the user has previous experience of this type of product and that it will be used by a competent professional. Before any use of this product it is recommended to complete some trials to validate the performance of the product within its expected application. All information and specification details contained within this document are inherent to this specific 3M product and would not be applied to other products or environment. Any action or usage of this product made in violation of this document is at the risk of the user. Compliance to the information and specification relative to the 3M product contained within this document does not exempt the user from compliance with additional guidelines (safety rules, procedures). Compliance to operational requirements especially in respect to the environment and usage of tools with this product must be observed. The 3M group (which cannot verify or control those elements) would not be held responsible for the consequences of any violation of these rules which remain external to its decision and control. Warranty conditions for 3M products are determined with the sales contract documents and with the mandatory and applicable clause, excluding any other warranty or compensation. For more information on 3M products and services please contact 3M. Personal Safety Division 3M United Kingdom PLC 3M Centre, Cain Road Bracknell, Berkshire RG12 8HT Tel.: 0870 60 800 60 www.3M.eu/Safety 3M Ireland Limited The Iveagh Building Carrickmines Park Carrickmines Dublin 18 t: 1 800 320 500

1. 3M ™ Safety Over Spectacles 2800 Series Product description The 2800 series of safety eyewear has been designed to be worn over prescription spectacles. Products include both pantoscopic adjustment (angle of the lens frame to the temple) and adjustable temple arm length (4 fixed positions). The temple tips also include eyelets to allow easy attachment of a lanyard. Four lens variants are available: Clear, Grey, Amber and Welding Shade 5. Key features Ŕ Optical class 1 lens for prolonged use Ŕ Offers protection against UV radiation Ŕ Designed to be worn over prescription eyewear Ŕ Adjustable temple features Ŕ Easy attachment to lanyards Product range Product ID Description Lens colour Frame colour 2800 3M ™ Over Spectacles 2800 with clear PC lens Clear PC Blue 2801 3M ™ Over Spectacles 2801 with grey PC lens Grey PC Blue 2802 3M ™ Over Spectacles 2802 with yellow PC lens Yellow PC Blue 2805 3M ™ Over Spectacles 2805 with shade 5 PC lens Welding Shade 5 PC Blue Technical datasheet Typical applications These products can be used in a wide range of applications including: Ŕ General assembly Ŕ Construction Ŕ Light duty maintenance and repair Ŕ Engineering Ŕ Woodworking Ŕ Foundry work Ŕ Certain welding applications Intended use These products are intended for protection against high speed particles at low energy (F) at extreme temperature conditions, -5ºC and +55ºC, (T) in accordance with EN 166:2001. These products also help protect against UV radiation in accordance with EN 170:2002 (clear and amber lenses), and sun glare in accordance with EN 172:1994 (grey). A number of lens options are available for a variety of different applications: Ŕ Clear – Good colour recognition and excellent UV protection Ŕ Grey – Good for protection from sun glare Ŕ Amber – Enhanced contrast in low light condition e.g. surface inspection Ŕ Welding Shade 5 – Offers protection for certain welding applications Use limitation Ŕ Never modify or alter this product Ŕ Do not use this product against hazards other than those specified in this document Ŕ In accordance with EN 166:2001 safety spectacles cannot be tested and approved for use against liquid droplets. Where liquid protection is specified a suitable product should be considered, for example safety goggles Standards and approval These products are type examined by BSI Group, Notified Body number 2797. These products are CE marked to the requirements of European Regulation (EU) 2016/425. The applicable legislation can be determined by reviewing the Certificates and Declarations of Conformity at www.3M.com/Eye/certs Materials listing Description Material Component 2800/2801/2802/2805 Lens Polycarbonate Ratchet holder Polyamide Ratchet Polyamide Temple slider Polyamide Temple tip Polyamide Temple screws Stainless steel Weight 39g