AT200-ATI-2

1. TECHNICAL DATA ______________________________________________________________________________ V ersion 1 1 AT200 Ultra Matt Cloth Adv ance Gaffa ® Tape General Description An Ultra Matt polythene extruded cloth tape coated with cable friendly , solvent free rubber - resin a dhesive that is designed to peel from clean surfaces . • Ultra matt finish • Flame retardant in situ • Cable friendly clean peel adhesive • Easy unwind very easy tear • Wide colour range • Can be written on • Wide temperature range • Water resistant in situ • Good abrasion resistance • Co nformable to awkward shapes • Non corrosive adhesive Te chni cal Details Typical Values Thickness 0.26mm Breaking Load 40 N/ cm Elongation 20% Adhesion Steel 4.5 N /cm Self 2.6 N/cm RoHS Compliant Yes Service Temperature - 10°C to +80°C Application Temperature +10°C to +40°C Storage Temperature +12°C to +25°C AFERA Association des Fabricants Européens de Rubans Auto - Adhésifs. NOTE Except where indicated otherwise, the figures stated are average values and should not be regarded as MAXIMUM or MINIMUM values for specification purposes. The Company reserves the right to improve products and any change in specification will result in a re - issue of the relevant ‘Technical Data Sheet’. Customers should satisfy themselves that the tape is suitable for their requirements whether after such modifications or otherwise. Please check that you have the latest issue of the ‘Technical Data Sheet’. All slitting and length tolerances are to British Standards. Before use the customer is ad vised to consult the Health & Safety Data Sheet produced by the company for this product, which is available on request. STORAGE Tapes stored below the minimum recommended temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.