3M Jupiter use and maintenance

3. JUPITER TURBO JUPITER TURBO - - NiMH NiMH Battery Charging Battery Charging Charging Time: 6 Charging Time: 6 - - 8 hours from flat. 8 hours from flat. Battery packs should not be left Battery packs should not be left on the charger regularly or for on the charger regularly or for any period exceeding 7 days. any period exceeding 7 days. Without periodic charging, a Without periodic charging, a NiMH NiMH battery in storage at room temperature battery in storage at room temperature loses loses approximately 10% of its charge after approximately 10% of its charge after one week and 20% after one month. one week and 20% after one month. Jupiter Battery Charger Jupiter Battery Charger

5. JUPITER TURBO JUPITER TURBO Install Pre Install Pre - - filters as shown (if required) filters as shown (if required)

8. JUPITER TURBO JUPITER TURBO Check Flow Alarm by covering outlet Check Flow Alarm by covering outlet - - wait ~10 seconds and alarm should sound. wait ~10 seconds and alarm should sound.

9. JUPITER TURBO JUPITER TURBO Attach Breathing Attach Breathing Hose to Hose to Turbo and Headtop Turbo and Headtop

1. JUPITER TURBO JUPITER TURBO Use & Maintenance All statem ents, technical inf o rm ation and reco mmendat i ons contained her e in are based on data we be li eve to be reliable, but the accuracy or compl e t e ness thereof is not guarant e e d. To the extent perm itted by law, 3M shall not be liabl e or responsible for any loss or da ma ge whether direct, indir ect, incident al, speci al or consequential arising out the sale, use or m i suse of 3M, OH&ES products or the user's inability to use such pro ducts.

2. JUPITER TURBO JUPITER TURBO BATTERY REMOVAL & INSTALLATION BATTERY REMOVAL & INSTALLATION Remove using fingers to release latch. Install by pushing in until battery clicks into position.

4. JUPITER TURBO JUPITER TURBO Attach filters to turbo Attach filters to turbo - - Ensure threads are not crossed. Ensure threads are not crossed. .

7. JUPITER TURBO JUPITER TURBO - - Airflow Check Airflow Check Check before each use: Check before each use: • • Leave filters attached Leave filters attached • • Insert Airflow Indicator Tube Insert Airflow Indicator Tube (White Ball) (White Ball) • • Turn Turbo on Turn Turbo on - - keep tube keep tube vertical vertical • • Check position of ball in tube Check position of ball in tube • • It should be above mark It should be above mark • • If not, check battery, filters. If not, check battery, filters.

10. JUPITER TURBO JUPITER TURBO - - Warning Lights Warning Lights W A RN I N G S DIS P L A Y S OUND COM M ENT S LO W B A TTE R Y C h a r ge ba t t e r y LO W FLO W • H o se b l o c ked – C l ear • Fi l t e r s bl oc k e d – re pl a c e • C a l i bra t ion ne e d e d LO W FLO W & BA T T E R Y S e e “L o w Flow” a n d ‘ L ow B a tte r y ’ a b o v e F L O W R E CO V E RY No r m al O p er at i o n = S l ow F l as h = O n e Shor t Beep = Long I n t e r m i t t e nt Beep

6. JUPITER TURBO JUPITER TURBO - - Calibration Calibration See User Instructions for full See User Instructions for full procedure. procedure. • • Perform calibration monthly or if Perform calibration monthly or if flow alarms occur. flow alarms occur. • • Remove Filters if fitted. Remove Filters if fitted. • • Insert Calibration Tube (Black Insert Calibration Tube (Black Ball) into Turbo Ball) into Turbo • • Hold turbo so tube is vertical. Hold turbo so tube is vertical. • • Press & hold ‘On’ button (3 lights Press & hold ‘On’ button (3 lights on control panel will light up.) on control panel will light up.) • • Hold until black ball rises in tube Hold until black ball rises in tube above mark. above mark. • • Release ‘On’ button. Release ‘On’ button. • • Remove Cal. Tube Remove Cal. Tube • • Re Re - - insert filters insert filters