Guide_ korrekt iføring af engangshandsker, Ansell Donning Doffing

ID: 416
146Totale visninger
0Medlemmer visninger
146Offentlige visninger
Del på sociale netværk
Del link
Brug et permanent link til at dele på sociale medier
Del via email

Venligst login for at dele dette document via email.

Indlejr på din hjemmeside
Vælg side at starte med

1. Ansell, ® and ™ are trademarks owned by Ansell Limited or one of its affiliates. © 2016 Ansell Limited. All Rights Reserved. HOW TO DON GLOVES HOW TO DOFF GLOVES Protective gloves are an important piece of safety equipment across a wide range of industries. When donned properly, they help protect workers from exposure to hazardous substances and products and processes from contamination. When doffed correctly, workers help prevent contamination to themselves and their environments. Below are tips on how to don and doff gloves in ways that help ensure worker safety and product integrity. Slide an ungloved finger under the wrist of the remaining glove, being careful not to touch the outside of the glove. 3 Grasp the outside edge of the glove near the wrist. 1 Peel the remaining glove off from the inside, creating a “bag” containing both gloves. Discard. 4 Peel the glove away from the hand, turning it inside out. Hold it in the opposite gloved hand. 2 Remove one glove from the package and inspect it to be sure no pinholes or tears are present. 1 If gloves are ambidextrous, they can be worn on either hand. If not, align the glove’s fingers and thumb with the proper hand before donning. 2 Check for a secure fit around the fingers and palm. The cuff should fit snuggly around the wrist. 4 Insert five fingers into the cuff and pull the cuff over the wrist. 3 PROPER DONNING & DOFFING OF DISPOSABLE GLOVES

To install this Web App in your iPhone/iPad press and then Add to Home Screen.