Vinyl elektrisk isolerings tape

1. TECHNICAL DATA ______________________________________________________________________________ Version 18 AT 7 PVC Electrical Insulation Tape General Description A lead free PVC Electrical Insulation t ape coated w ith cross - linked solvent based rubber resin adhesive.  Flame retardant  Self - extinguishing  Easy tear  Easy unwind  Flexible  Conformable to awkward shapes  Water resistant  Good abrasion resistance  UV resistant  Non - corrosive adhesive Specifications Certification* to the following standards may be available o n request. BS EN 60454 - 3 - 1/Type 2 (Formerly BS 3924) and BS 4J10:1991 . *Standard charge for certificate: £25.00. Technical data Thickness 0.13mm Breaking Load 26 N/cm Elongation 180% Adhesion Steel 2.4 N/cm Self 2.1 N/cm Water Extract pH 6.8 Conductivity Max. 2 mS/m Electrical P roperties B/down Voltage 8.0 kV 1 Min Proof Test 6.0 kV Insulation Resist ance 10 11 O hms Cu Corrosion No Staining Flame Retardancy Self extinguishing RoHS Compliant Yes Service Temperature - 5°C to +70°C Application Temperature 0°C to +40°C Storage Temperature +12°C to +25°C AFERA Association des Fabricants Européens de Rubans Auto - Adhésifs. NOTE Except where indicated otherwise, the figures stated are average values and should not be regarded as MAXIMUM or MINIMUM values for specification purposes. The Company reserves the right to improve products and any change in specification will result in a re - issue of the relevant ‘Technical Da ta Sheet’. Customers should satisfy themselves that the tape is suitable for their requirements whether after such modifications or otherwise. Please check that you have the latest issue of the ‘Technical Data Sheet’. All slitting and length tolerances are to British Standards. Before use the customer is advised to consult the Health & Safety Data Sheet produced by the company for this product, which is available on request. STORAGE Tapes stored below the minimum recommended temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.