3M Beskyttelsesdragter_NY_EN_

4. Selection Flow Chart Page 6 Page 7 Jets (Type 3) 4570 4535 4540+ 4565 4515 4532+ 4530* 4500 4565 4510 4545 4510 4545 4520 4505 Spray ( Ty p e 4) WARNING: This product selector is intended to provide guidance on key features of the 3M product range. Product selection should always be made after a risk assessment by a competent person knowledgeable of the actual working conditions and limitations of the PPE. Particles (Type 5) Splash ( Ty p e 6) Ye s Ye s Particles Liquids Ye s Do you require protection from liquids or particles? Contact with sparks/flame? Increased repellency to oil based liquids Liquids No No No No No Type of Exposure Additional breathability required? Is low linting critical? Anti-static required? Ta p e d s e a m s? No Is the contaminant hazardous? Ye s Ye s Ye s No Ye s *The fabric complies with ISO 14116:2008 for limited flamespread index 1 (must be worn over and index 2 or 3 garment and must not be worn next to skin).

1. The suit of armour that leaves you free to focus on the job. 3M Personal Safety 3M ™ Protective Apparel

7. DENMARK 3M a/s Personal Safety Division Hannemanns Allé 53 DK-2300 København S Tlf.: 43 48 01 00 3Msikkerhed@mmm.com www.3Msikkerhed.dk Recycle. Printed in Sweden. © 3M 2017. All rights reserved. Ref. 01431740 EN FINLAND Suomen 3M Oy Työsuojelutuotteet Keilaranta 6 02150 Espoo Puhelin (09) 525 21 tilaukset@mmm.com www.3M.fi/suojaimet NORWAY 3M Norge AS Verneprodukter Tærudgata 16 2004 Lillestrøm Tlf.: 06384 kundeservice@mmm.com www.3M.no/vern SWEDEN 3M Svenska AB Personlig skyddsutrustning Bollstanäsvägen 3 191 89 Sollentuna Tel: 0370-65 65 65 Kundservice kundservice@mmm.com www.3M.se/personskydd www.youtube.com/3MpsdNordic

2. Page 2 Page 3 Introduction At 3M we have a select and high quality range of products, from PPE Directive Category I CE simple coveralls to PPE Directive Category III Coveralls, which provide protection against many hazards. The range of 3M ™ Protective Apparel includes a variety of features, from the use of fabrics with specialist treatments for enhanced wear and added protection, to breathable back panels for increased comfort. Our experts can work closely with you, to help you identify hazards and best protect your workers against them. Contents Selection 4 Protection Types 4 Additional Standards 4 Materials 5 Product Features 5 Selection Flow Chart 6 3M ™ Protective Coveralls and Accessories 8 Selection Guide by Application 11 Customisation 12

3. Page 4 Selection Materials There are many tests and standards that apply to 3M™ Protective Coveralls and selection can be a daunting task. The following section outlines the different options available to help you select the right product for your employees. Protection Types Depending on the materials and construction, protective coveralls can be designed for either hazardous applications (certified to CE Category III) or non-hazardous applications (CE Simple Category I). Products for hazardous applications can be tested and certified to any of six different “Type” standards, providing guidance on suitability of use: Category Symbol P r o te c ti o n Ty p e 3M Product Code CE Category III 1. Gas Protection N/A HIGH 2. Non-Gas Protection N/A 3. Liquid Jet Protection 4570 4. Liquid Spray Protection 4570, 4565 5. Particle Protection 4570, 4565, 4545, 4540+, 4535, 4532+, 4530, 4520, 4515, 4510 6. Limited Liquid Splash Protection CE Category I CE Simple 4505, 4500 LOW PROTECTION Additional Standards Some 3M protective coveralls and their materials are approved to additional standards* for specialist applications. The following is a guide that offers a comparison between the materials used in the 3M ™ Protective Coverall range. For full penetration and permeation data please contact our Safety Solutions Specialists on 0870 60 800 60 (UK) or 1 800 320 500 (Ireland). Product features 3-Panel Hood Provides improved fit and increased compatibility with other Personal Protective Equipment (PPE) Knitted cuffs For increased wearer comfort Anatomical design and fit For optimal wear, coverage and comfort Tests for Protection against micro-organisms 4510 4545 4565 4570 ISO 16603 – assesses resistances to penetration under pressure by synthetic blood (visual assessment) Class 4 Class 3 Class 6 Class 6 ISO 16604 – models resistance to viral penetration under pressure (biological assay) Unclassified Unclassified Unclassified Class 6 ISO 22610 – assesses resistances to wet bacterial penetration during mechanical contact Class 6 Class 6 Class 6 Class 6 ISO 22611 – determines resistance to penetration by aerosols containing bacteria Class 3 Class 3 Class 3 Class 3 ISO 22612 – assesses resistance to dry microbial penetration using talc contaminated with spores Class 3 Class 3 Class 3 Class 3 Protection against micro-organisms (EN 14126) Protection against micro-organisms (EN 14126) with exception of ISO 16604 (see table below) Anti-static coating (EN 1149-5) Refer to User Instructions for further information on anti-static compliance Protection against nuclear particles (EN 1073-2) Total Inward Leakage Class 1 Protection against nuclear particles (EN 1073-2) with exception of EN863 puncture resistance Total Inward Leakage Class 2 3M protective coveralls can offer a variety of features depending on your needs. The illustration below highlights some of the features available. Two-way zip With a fully sealable storm flap for extra convenience and protection from contaminants Breathable back panels Reducing the risk of heat stress in hot environments *Please refer to product user instructions and packaging for more information. SMMMS Sophisticated 43gsm SMMMS fabric, designed to offer increased breathability and a barrier against hazardous particles and limited liquid splashes. Protective Coverall 4520 and back panels of Protective Coveralls 4535 and 4540+ Microporous PE Laminate PE laminate is designed to offer a good barrier against hazardous particles and limited liquid splashes, whilst the micropores allow for some breathability. Protective Coveralls 4510 and 4545. Also white material of Protective Coveralls 4535 and 4540+ Non-Microporous PE Laminate Designed to offer a very good barrier against hazardous particles and certain liquid splashes and sprays. Protective Coverall 4565 Multi-Layer Non-Microporous PE Laminate Designed to offer an excellent barrier against hazardous particles and certain liquid splashes, sprays and jets. Protective Coverall 4570 Polypropylene Light duty protection against non- hazardous liquids and dust. Designed to offer a particularly good barrier against non-hazardous particles. Coverall 4500 PE Laminate Light duty protection against non- hazardous liquids and dust. Designed to offer a particularly good barrier against non-hazardous liquids. Coverall 4505 SMS 50gsm robust breathable fabric, designed to offer a good barrier against hazardous particles and limited liquid splashes. Protective Coverall 4515 SMMS 54gsm multi layered SMMS fabric. Breathable and designed to offer a good barrier against hazardous particles and limited liquid splashes. Protective Coverall 4530 SSMMS 52gsm SSMMS fabric with alcohol and oil repellence treatment applied. Highly breathable and designed to offer a good barrier against hazardous particles and limited liquid splashes. Protective Coverall 4532+

6. N.B. 3M Accessories (excluding lab coats) are not CE marked and are not intended as PPE for use in hazardous environments. Accessories Selection Guide by Application 3M ™ Lab Coat 4400 c Made from the same PP material as the 3M ™ Coverall 4500 c Designed for light duty applications c Offers a barrier against non-hazardous particles and light liquid splashes c Zip fastener c Internal pocket c Available in white and blue 3M ™ Lab Coat 4440 c Made from the same microporous PE laminate material as the 3M ™ Protective Coverall 4535 c Knitted cuffs c Offers a barrier against non-hazardous particles and light liquid splashes c Zip fastener c Material has an anti-static treatment 3M ™ Lab Coats 3M ™ Lab Coat 4432+ c Made from the same SSMMS material as the 3M ™ Protective Coverall 4532+’ c Oil and alcohol resistant coating c Offers a barrier against non-hazardous particles and liquid light splashes c Zip fastener c Internal pocket c Material has an anti-static treatment 3M ™ Overshoe 442 3M ™ Overshoe 402 3M ™ Overboot 440 3M ™ Overboot 450 c Made from the same microporous PE laminate material as the protective coverall 4535 c Elastic at the calf c Universal size with ties to help provide a good fit c Laminated material ties to minimise particle shed and contamination in particle restricted environments such as clean rooms c Overboot 450 features a reduced slip sole c Material has an anti-static treatment Standard Sole Reduced Slip Sole 3M ™ Overboot Covers 3M ™ Overshoe Covers c Made from the same microporous PE laminate material as the protective coverall 4535 c Elastic at ankle c Material has an anti-static treatment c Offers a general barrier to non-hazardous substances c Reduced slip print on base c Elastic at ankle 3M ™ Overhood 446 3M ™ Mob Cap 407 3M ™ Oversleeve 445 3M ™ Oversleeve 444 3M ™ Oversleeves Head Protection c Made from the same laminated material as the 3M ™ Protective Coverall 4510 c Offers a general barrier to non-hazardous subtances c 40.5cm/16 inch protection covering wrist to top of arm c Elastic finish on top end c Knitted cuffs featured on the oversleeve 445 c Made from the same laminated material as the protective coverall 4510 c Drapes over the shoulders offering excellent coverage c Designed to help prevent hair from contaminating the working environment c Universal size ● Most popular choice ● Suitable for consideration 4500 4505 4510 4515 4520 4530 4532+ 4535 4540+ 4545 4565 4570 Certification** N/A N/A Material Weight 45gsm 67gsm 47gsm 50gsm 43gsm 54gsm 52gsm 55gsm 49gsm 49gsm 49gsm 92gsm Sizes S–4XL S–4XL S–4XL S–4XL S–4XL M–2XL S–4XL S–3XL S–4XL S–4XL S–4XL S–4XL Colours Light-duty cleaning, warehousing, janitorial ● ● ● Asbestos Inspection, site preparation, insulation ● ● ● ● ● ● ● ● ● Asbestos removal ● ● ● ● ● ● ● ● ● Light industrial cleaning, machine maintenance ● ● ● ● ● ● ● ● ● Pharmaceutical processing, handling toxic powders ● ● ● ● ● ● ● ● Painting & coating, resins ● ● ● ● ● ● ● Cleanrooms ● ● ● Pesticide spraying ● ● Chemical mixing and handling ● ● Chemical spills, decontamination, tank cleaning ● Product Selector category iii category iii category iii category iii category iii category iii category iii category iii category iii category iii category i category i TYPE 4 EN 14605 : 2005 +A1 : 2009 TYPE 4 EN 14605 : 2005 +A1 : 2009 EN 1149-5 EN 1149-5 EN 1149-5 EN 1149-5 EN 1149-5 EN 1149-5 EN 1149-5 EN 1149-5 EN 1149-5 ** See page 4 or product technical datasheets for full details. EN 1073-2 EN 1073-2 EN 1073-2 EN 1073-2 EN 1073-2 EN 1073-2 EN 1073-2 EN 1073-2 EN 14126 EN 14126 EN 14126 EN 14126 TYPE 6 EN 13034 : 2005 +A1 : 2009 TYPE 6 EN 13034 : 2005 +A1 : 2009 TYPE 6 EN 13034 : 2005 +A1 : 2009 TYPE 6 EN 13034 : 2005 +A1 : 2009 TYPE 6 EN 13034 : 2005 +A1 : 2009 TYPE 6 EN 13034 : 2005 +A1 : 2009 TYPE 6 EN 13034 : 2005 +A1 : 2009 TYPE 6 EN 13034 : 2005 +A1 : 2009 TYPE 6 EN 13034 : 2005 +A1 : 2009 TYPE 6 EN 13034 : 2005 +A1 : 2009 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 TYPE 3 EN 14605 : 2005 + +A1 : 2009 Page 10 Page 11 EN 1073-2 EN 1073-2

5. 3M ™ Protective Coveralls Page 8 Page 9 3M ™ Coverall 4505 Designed for light duty protection against non-hazardous liquids and dusts. Its robust laminated material is designed to offer a particularly good barrier to liquids and oils. c Elasticated hood, cuffs, ankles and waist c 2 way zip with storm flap c Water and oil resistant 3M ™ Protective Coverall 4520 Made from extremely lightweight and breathable material and is designed to offer protection against hazardous dusts and limited liquid splashes. c Elasticated hood, ankles and waist c 2 way zip with sealable tab on storm flap c 3-panel hood c Knitted cuffs c Low linting CE SIMPLE TYPE 6 EN 13034 : 2005 +A1 : 2009 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 EN 1149-5 EN 1073-2 * , , , see page 4 for details 3M ™ Protective Coverall 4535 Provides a superb balance of comfort and protection. The microporous PE laminate at the front of the garment is designed to offer a good barrier to limited liquid splash, whilst the large SMMMS breathable back panel increases wearer comfort. c Elasticated hood, ankles and waist c 2 way zip with storm flap c Knitted cuffs c Low linting 3M ™ Protective Coverall 4565 Made from a soft lightweight fabric with taped seams, providing a very good barrier to hazardous particles and limited liquid splash and spray. Supplied in vacuum packaging. c Elasticated hood, ankles and waist c 3-panel hood c 2 way zip with fully sealable storm flap c Knitted cuffs c Ultra low linting EN 1149-5 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 TYPE 6 EN 13034 : 2005 +A1 : 2009 EN 1073-2 TYPE 4 EN 14605 : 2005 +A1 : 2009 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 TYPE 6 EN 13034 : 2005 +A1 : 2009 EN 1149-5 EN 1073-2 EN 14126 3M ™ Coverall 4500 Designed for light duty protection against non-hazardous liquids and dusts. It is designed to offer a particularly good barrier to particles. c Elasticated hood, cuffs, ankles and waist c 1 way zip with storm flap 3M ™ Protective Coverall 4515 Available in a wide range of colours. The breathable fabric is designed to offer protection against hazardous dusts and limited liquid splash. c Elasticated hood, cuffs, ankles and waist c 2 way zip with storm flap c Low linting CE SIMPLE TYPE 6 EN 13034 : 2005 +A1 : 2009 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 EN 1073-2 3M ™ Protective Coverall 4545 Made from extremely soft, lightweight, yet durable fabric which provides a good barrier to hazardous particles and limited liquid splash. Supplied in vacuum packaging. c Elasticated hood, ankles, and waist c 2 way zip with fully sealable storm flap c 3-panel hood c Knitted cuffs c Ultra low linting 3M ™ Protective Coverall 4532+ Made from highly breathable fabric with a specialist coating, providing anti-static protection & enhanced liquid repellency. c Enhanced and reinforced triangular gusset panel c Elasticated hood, ankles and waist c 2 way zip with fully sealable storm flap c 3-panel hood c Knitted cuffs c Low linting EN 1149-5 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 TYPE 6 EN 13034 : 2005 +A1 : 2009 EN 1073-2 EN 1149-5 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 TYPE 6 EN 13034 : 2005 +A1 : 2009 EN 1073-2 EN 14126 3M ™ Protective Coverall 4540+ A highly versatile protective coverall, which is mostly made from a unique microporous PE laminate, designed to be softer and drape better over the body. It is designed to offer a good barrier to particles and limited liquid splash but it also features a breathable SMMMS back panel. c Elasticated hood, ankles and waist c 2 way zip with fully sealable storm flap c 3-panel hood c Knitted cuffs c Low linting 3M ™ Protective Coverall 4570 Designed to offer an excellent barrier to hazardous particles and certain liquid splashes, sprays and jets. c Elasticated hood and ankles c 3-panel hood c Double front closing system with large zip pull for easy wear c Elasticated cuffs with thumb loops c Ultra low linting EN 1149-5 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 TYPE 6 EN 13034 : 2005 +A1 : 2009 EN 1073-2 TYPE 3 EN 14605 : 2005 + +A1 : 2009 TYPE 4 EN 14605 : 2005 +A1 : 2009 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 TYPE 6 EN 13034 : 2005 +A1 : 2009 EN 1149-5 EN 1073-2 EN 14126 3M ™ Protective Coverall 4510 Designed to offer cost effective protection against hazardous dusts and limited liquid splashes. c Elasticated hood, ankles, cuffs and waist c 2 way zip with storm flap c Ultra low linting 3M ™ Protective Coverall 4530 Designed to be lightweight and breathable whilst offering protection against hazardous dusts and limited liquid splashes. The fabric complies with ISO 14116:2008 for limited flamespread index 1 (must be worn over an index 2 or 3 garment and must not be worn next to skin). c Elasticated hood, ankles and waist c 2 way zip with fully sealable storm flap c 3-panel hood c Knitted cuffs c Low linting EN 1149-5 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 TYPE 6 EN 13034 : 2005 +A1 : 2009 EN 1073-2 EN 1149-5 TYPE 5 EN ISO 13982-1 : 2004 +A1:2010 TYPE 6 EN 13034 : 2005 +A1 : 2009 EN 1073-2 EN 14126