Flex PU

2. Cleaning Disinfecting On request a list of approved disinfectants can be sent. Plastibert takes no responsability for damage if other products are used. Care EN ISO 3758 : 2012 Shrinkage after washing ISO 5077 : 2007 length < 4% width < 4% Antimicrobial effect can be reduced by washing Alcohol in high concentrations might damage this article. Other This article is HF weldable, this should however be tested on your equipment. Remarks This item complies with the most recent REACH specifications. IMPORTANT This datasheet is provisional, which means that up to now did not make enough productions to be certain of all values. Therefore manufacturer still cannot guarantee all numerical data. Slight colour variations between deliveries are possible. We recommend that you always process items from different deliveries separately. The items delivered comply with the specifications stated in this datasheet. In principle, we do not guarantee properties or characteristics that are not included in it. This datasheet is valid for five years after the date of publication. However, we guarantee that the item has been produced with the same ingredients and ISO-9000 procedures were strictly complied with. In the event that any modifications may have been applied during this period, all the properties were retested. All the specifications given in this document have been tested in accredited laboratories or in our own laboratory using officially calibrated measuring equipment. We recommend to clean this article with water and soap only. Cleaning products containing alcohol, solvent, bleach or abrasive products can damage this product.

1. Date 8/06/2020 Backing 100% Polyamide Coating 100% Polyurethane Composition Coating 85 g/m 2 Backing 80 g/m 2 Total 165 g/m 2 ± 15 g/m² Tensile strength ISO 1421 : 2016 length >32 daN/ 5 cm width >18 daN/ 5 cm Tear strength ISO 4674-01 : 2016 length >2,8 daN width >2,8 daN Seam resistance ISO 13935-1 : 2014 length >22 daN/ 5cm width >15 daN/ 5cm % Elongation under 30N/5cm ISO 1421 : 2016 length >30 % width >30 % Coating to fabric adhesion ISO 2411 : 2017 >3,0 daN/ 5cm Flex resistance ISO 5402 1 : 2017 no quality loss after 200000 Hydrostatic head ISO 811 : 2018 >200 cm Tight to house dust mites Protection against rain EN343 : 2007 Class 3 WYMTS 84400 (21/07/2017) Hydrolysis Jungle test no loss of quality after 3 weeks Water Vapour Permeability ASTM E96 : 2016 >600 g/m²/24 h Properties after autoclave treatment 50x120°C/20' Centexbel 17.01933.01 (20/04/2017) Antibacterial Ultra-Fresh Thomson Research (Valid license available) active ingredient = 3-iodo-2-propynyl butylcarbamate According to the Biocidal Products Regulation (EU) No 528/2012, it's mandatory to communicate this to your customers Biocompatibility ISO 10.993-10 : 2014 OK Bioserv 2019040671 (14/05/2019) Cytotoxicity ISO 10.993-5 : 2009 OK Bioserv 2019040671 (14/05/2019) Oekotex 100 Class 1 (Valid certificate available) PROVISIONAL TECHNICAL DATASHEET 01 T022T (NS) T022T000 all conform