Lubetech Catalogue Spildkatalog

1.

18.

8. 3

128.

103. Luray Caverns, Virginia STEEL STORAGE UNITS

104. 99 31-1205

109. The Saale River Valley, Germany ANCILLARIES

115. Salmon River, Alaska DRAIN PROTECTION

82. 77 The UK government’s plan to generate at least 20 percent of all its power from wind turbines has seen the development of the world’s largest offshore wind farm. The farm is equipped with over 100 giant wind turbines that are installed off Thanet in Kent. The plant will power about 240,000 urban homes, which is equivalent of half the county of Kent.

119. GRANULES Pancake Rocks, New Zealand

58. Solar central power towers generate electric power from sunlight by focusing concentrated solar radiation on a tower-mounted heat exchanger (receiver). The system uses hundreds to thousands of sun-tracking mirrors called heliostats to reflect the incide nt sunlight onto the receiver. These solar farms are a new generation of solar central power towers, capable of producing clean, cost-effective, dispatchable electric power on a very large scale, without harmful pollutants or carbon emissions. 53

22. 17 This future aircraft design concept for supersonic flight over land comes from the team led by the Lockheed Martin Corporation. The team’s simulation shows possibility for achieving overland flight by dramatically lowering the level of sonic booms through the use of an “inverted-V” engine-under wing configuration. Other revolutionary technologies help achieve range, payload and environmental goals. This concept is one of two designs presented to the NASA that could enter service in 2035.

64. The Three Gorges Dam is the largest hydroelectric dam in the world both in terms of size and hydroelectric power generation. Its an astonishing feat of engineering. Located in the middle of the three gorges on the Yangtze River in China the dam will reduce the impacts of flooding and the hydroelectric turbine generators will help reduce China’s dependency on coal. The Three Gorges Dam will produce about 84.6 billion kilowatt hours of clean energy annually. 59

3. ABSORBENTS Glacier Bay, Alaska THE FUTURE IS OURS TO PROTECT

30. 25 SkyLifter is developing a piloted airship that could deliver new capabilities for cargo transportation. These massive balloons will be able to carry up to 150 tonnes for more than 1,200 miles. Unlike a conventional cigar-shaped airship, the SkyLifter is designed like a disc to make steering easier when carrying heavy loads under different wind conditions. Measuring some 500ft, nearly the size of a football stadium, the SkyLifter airship could even carry entire buildings - although these would need to be designed to be transportable. Fixed and rotary winged aircraft like jets and helicopters use a large amount of energy just keeping in the air, whereas the SkyLifter is a buoyant aircraft that floats, so it only consumes energy to move it over the land. Together with the solar collectors on the top, the environmental benefits of SkyLifter are obvious.

16. 11 Coral reefs attract an array of marine life and provide enclosed spaces for sea creatures to breed or take refuge. However, only about 15% of the sea bed has a solid enough substratum to allow reefs to form naturally. In order to increase the number of reefs in these areas artificial reefs have recently been created by the artist, Jason De Caires Taylor. Made from materials that are environmentally sensitive, Jason’s underwater sculptures create a unique visual seascape while providing the perfect solution to reef degradation. These reefs have been successful in lifting the pressure off natural reefs which, over the past few decades, have been over-fished and over-visited. By diverting attention to artificial reefs, natural reefs have now been given a greater chance to repair and to regenerate.

38. 33 The goal of the PlanetSolar is to be the first to circumnavigate the globe in a “solar” boat, i.e. one powered by a silent, poll ution-free electrical engine, driven exclusively by solar energy. With this project the PlanetSolar team intends firstly to show that current technologies aimed at improving energy efficiency are reliable and effective, and secondly to advance scientific research in the field of renewable energy. PlanetSolar has already made technological developments possible in many fields such as the production of composite materials and structures, and also the production and storage of solar energy (or electricity). Each stage in the project and each day that PlanetSolar sails will enable science to progre ss.

46. 41 When building the new A75 autoroute across France, planners accepted plans for a suspended bridge because the alternative route would have intersected the water table and would have had a negative environmental impact on the local town, cost more and lengthened the driving distance. Designed by Michel Virlogeux and Norman Foster, the resulting Millau Viaduct consists of an eight-span steel roadway and is the tallest bridge in the world. At a total of 2,500m (8,200 ft) long it is also the world’s longest cable-stayed deck.

76. 71 At the heart of this project is the conservation of our planet by the promotion of solar energy, energy efficiency and eco-mobility. This is a great occasion to advance knowledge and to inform and make the general public aware of the importance of renewable energy. Growing constantly, a spirally constructed solar power satellite, or Solar Disk, will have a final diameter of more than 5 km. Photovoltaic blanket rolls transported to orbit are then deployed around the perimeter of the disk. Once the blankets are attached to the slowly spinning disk, integrated flat power cables are linked by radial power bushes attached by a construction “spider” that travels along the rotating construc tion beam.

127. THE FUTURE IS OURS TO PROTECT. TELEPHONE: 023 8027 4123

92. The AK-1000 tidal energy turbine, developed by Atlantis Resources Corporation, is the world’s largest and the most powerful tidal turbine and is a landmark in bringing tidal power one step closer to commercial viability. The turbine has been installed on the sea bed and will be connected to a grid at the European Marine Energy Centre in Orkney. The turbine is capable of generating enough electricity for more than 1,000 homes and is designed for harsh weather and rough, open ocean environments such as those found off the Scottish coast. 87

68. British company Wind Power Limited has unveiled the new Aerogenerator project visualised by leading international architects Grimshaw. The Aerogenerator X is considered one of the only real alternative solutions available to help deliver the UK’s offshore wind strategy in a reliable and cost effective manner. It does not have the same weight constraints as a normal wind turbine and the blades do not suffer weight-induced fatigue. This new design is half the height of an equivalent horizontal-axis turbine and its weight is concentrated at the base of the s tructure. The Aerogenerator X is the conclusion of an 18-month feasibility study called the NOVA project undertaken by Wind Power Limited, QinetiQ, Cranfield University, Strathclyde University and Sheffield University and will help to solve the problem of huge capital costs for deeper water wind farm applications. ©WPL & Grimshaw 2010 63

63. The Great Barrier Reef SPILL KITS CLIP CLOSE VINYL CARRIER WHEELED BIN

10. 5 TECH FEATURES > Perforated Roll ........................................................................................................... > Compatible with our Spill Depot storage system ........................................................................................................... > Perfect for use on walkways ........................................................................................................... BLACK GOLD MAINTENANCE ROLL 69-5001

26. 21 TECH FEATURES > Heavyweight coverstock for increased tear resistance ........................................................................................................... > Floats on water for easy retrieval ........................................................................................................... > Hydrophobic - absorbs only oil and not water ........................................................................................................... ‘SUPERIOR’ OIL-ONLY PAD 75-7000

12. 7 TECH FEATURES > Industrial strength outer skin ........................................................................................................... > Hydrophobic ensures high oil absorption ........................................................................................................... > Absorbs oil and floats on water ........................................................................................................... WHITE GOLD OIL-ONLY SOCK 69-7001

33. TECH FEATURES > Multiple perforations to suit many applications ........................................................................................................... > Unique dispenser box for easy dispensing ........................................................................................................... > Bonded construction with fine fibre backing ........................................................................................................... ‘TOUGH N’SOFT’ MAINTENANCE ROLL N’ BOX 87-5003 TOUGH N’SOFT ABSORBENTS

40. 35 TECH FEATURES > Ideal for use on walkways ........................................................................................................... > Scuff resistant and strong construction ........................................................................................................... > Use to protect floors under production lines ........................................................................................................... ‘BLACK & WHITE’ MAINTENANCE ROLL 77-5002

44. 39 TECH FEATURES > Absorbs all types of fluids including acids ........................................................................................................... > Bonded construction for improved fluid retention ........................................................................................................... > Increased loft for better absorption ........................................................................................................... ‘BLACK & WHITE’ CHEMICAL ROLL 77-6001

24. TECH FEATURES > Extra thick outer skin for excellent fluid retention ........................................................................................................... > The engineering shop essential ........................................................................................................... > Absorb more than five litres of fluid per sock ........................................................................................................... ‘SUPERIOR’ MAINTENANCE SOCK 19 75-2000

116. DRAIN PROTECTION 111 > Made from industrial grade reinforced vinyl ............................................................................................... > Provide all-weather protection for polyurethane drain covers ............................................................................................... > Includes securing rings for wall mounting ............................................................................................... VINYL HOLDALL FOR DRAIN COVERS TECH FEATURES 34-1061

77. FILLED EXCLUSIVELY WITH OUR SUPERB BLACK & WHITE ABSORBENTS, THE BLACK & WHITE SPILL KITS ENSURE THAT EVERYTHING IS TO HAND TO DEAL WITH ACCIDENTAL SPILLS EFFECTIVELY AND EFFICIENTLY. BLACK & WHITE ABSORBENTS ARE WELL RECOGNISED FOR THEIR ABSORBENCY SPEED AND FOR THEIR STRENGTH, MAKING THESE KITS PERFECT FOR WHEN A RAPID RESPONSE IS NEEDED. BLACK & WHITE SPILL KITS COME IN A VARIETY OF SIZES FROM THE ‘ONE OFF USE’ 25 LITRE CLIP CLOSE UP TO THE LARGEST KIT IN THE BLACK & WHITE RANGE, THE 240 LITRE WHEELED BIN SPILL KIT. EACH SPILL KIT SIZE IS AVAILABLE FOR MAINTENANCE, OIL-ONLY AND CHEMICAL FLUID SPILLS. EXCEPTIONALLY QUICK ABSORPTION RATES AND STRONG MATERIALS MAKE THESE THE IDEAL SPILL KIT CHOICE. BLACK & WHITE SPILL KITS - PERFORMANCE AND ENDURANCE COMBINED. PERFORMANCE AND ENDURANCE COMBINED BLACK & WHITE SPILL KITS

61. TECH FEATURES > Lockable cabinet ........................................................................................................... > Variable spindle locations to suit differing roll sizes ........................................................................................................... > High quality industrial polyester powder coated steel construction ........................................................................................................... > Versatile modular system ........................................................................................................... > Wall mountable ........................................................................................................... > Compatible with 20ltr spill tray - code 31-3080 ........................................................................................................... SPILL DEPOT DISPENSING & STORAGE UNIT SPILL DEPOT DEPOT-5 DEPOT-4

69. THE SUPERIOR RANGE OF SPILL KITS PROVIDE THE BIGGEST CHOICE OF KIT CAPACITY AND FORMAT. WE NEVER COMPROMISE ON QUALITY SO OUR SUPERIOR SPILL KITS ONLY CONTAIN OUR TRUSTED SUPERIOR ABSORBENTS. BECAUSE OUR CUSTOMERS ALL HAVE DIFFERENT REQUIREMENTS, WE HAVE CREATED THE SUPERIOR SPILL KITS IN A VARIETY OF SIZES RANGING FROM THE HANDY 15 LITRE CAPACITY KITS, UP TO THE MAMMOTH 1,000 LITRE CAPACITY WHEELED BIN KIT. AVAILABLE IN THE USUAL SPILL TYPE FORMATS FOR MAINTENANCE, OIL-ONLY AND CHEMICAL USE. SUPERIOR SPILL KITS WILL ALSO PROVIDE YOU WITH PEACE OF MIND IN THE KNOWLEDGE THAT YOU ARE ABLE TO RESPOND QUICKLY AND SAFELY TO A SPILL, THEREBY PROTECTING THE ENVIRONMENT FROM POTENTIALLY HARMFUL CONTAMINATION. SUPERIOR SPILL KITS - CHOICE AND VERSATILITY. CHOICE AND VERSATILITY SUPERIOR SPILL KITS

9. GOLD ABSORBENTS AS A RESULT OF AN EXTENSIVE RESEARCH AND DEVELOPMENT PROGRAM, THE LUBETECH GOLD RANGE OF ABSORBENTS HAS NOW BECOME THE BENCHMARK BY WHICH ALL OTHER ABSORBENT PRODUCTS ARE MEASURED. THESE ABSORBENTS HAVE A NUMBER OF DISTINCT FEATURES THAT HELP INCREASE ABSORBENCY AND FLUID RETENTION. TO INCREASE ABSORBENCY WE HAVE DEVELOPED A MATTRESS SYSTEM CREATING SPACES INTO WHICH FLUIDS ARE DRAWN. FLUID RETENTION HAS BEEN INCREASED TO THE MAXIMUM BY HAVING A COVER STOCK ON ONE SIDE AND A FINE FIBRE LAYER ON THE OTHER. THIS HAS BEEN ENHANCED BY OUR UNIQUE EDGE STITCHING WHICH HOLDS THE FLUID AND PREVENTS IT FROM DRAINING OUT OF THE MATERIAL. AVAILABLE FOR OIL, MAINTENANCE AND CHEMICAL SPILLS, THESE ARE WITHOUT DOUBT THE BEST QUALITY ABSORBENTS ON THE MARKET. GOLD - THE GOLD STANDARD IN ABSORBENTS. THE GOLD STANDARD IN ABSORBENTS

59. HAVING IDENTIFIED THE NEED TO PROVIDE OUR CUSTOMERS WITH A SAFE WAY TO STORE AND DISPENSE LUBETECH ABSORBENTS IN THE WORKPLACE, WE CREATED THE LUBETECH SPILL DEPOT SYSTEM. THE SPILL DEPOT PROVIDES THE EASIEST AND MOST CONVENIENT WAY TO STORE AND DISPENSE ABSORBENT PADS, ROLLS, SOCKS AND PILLOWS. THEY COME IN MODULAR FORMATS WHICH CAN EITHER BE WALL MOUNTED OR LEFT FREE STANDING. THE 2-PART AND 3-PART UNITS ARE AVAILABLE WITH A LOCKABLE BASE CABINET UNIT. THE CABINETS ARE COMPATIBLE WITH OUR 20 LITRE POLYETHYLENE SPILL TRAYS - PERFECT FOR WHERE THERE IS A REQUIREMENT FOR STORING SMALL CONTAINERS OF FLUIDS INSIDE THE UNIT. SPILL DEPOT - THE MODULAR DISPENSING SYSTEM FOR ABSORBENTS. THE MODULAR DISPENSING SYSTEM FOR ABSORBENTS TM SPILL DEPOT

91. PRESTIGE SPILL CONTAINMENT TECH FEATURES > Lightweight industrial grade construction ................................................................................................... > Unique texture ‘non-slip’ grate ................................................................................................... > Fully nestable without the grates ................................................................................................... > Suitable for storing 20 litre drums ................................................................................................... POLYETHYLENE SPILL TRAYS WITH GRATE 40 LITRE TRAY 31-3088 31-3080 31-3082 31-3084 31-3086 31-3085

126. 121 • Excellent products • Dedicated people • Free technical support • Free Next Day delivery to UK mainland (Excluding Scottish Highlands) • No minimum order size AND WE CONTINUE TO USE THESE STRENGTHS TO HELP INDUSTRY PROTECT THE ENVIRONMENT. LUBETECH IS SPECIAL BECAUSE OF OUR COMMITMENT TO PROVIDE:

65. LUBETECH GOLD SPILL KITS ARE THE BEST QUALITY KITS ON THE MARKET WHICH CAN HELP YOU RESPOND QUICKLY AND EFFICIENTLY TO SPILLS OF ALL KINDS. FILLED WITH THE VERY BEST LUBETECH GOLD ABSORBENTS, GOLD SPILL KITS ARE AVAILABLE IN THE USUAL MAINTENANCE, OIL-ONLY AND CHEMICAL FORMATS. ALL THE GOLD SPILL KITS ARE CAREFULLY HAND PREPARED AND PACKED WITH ONLY THE VERY BEST MACHINE EDGE STITCHED, DOUBLE SIDED PADS IN OUR UK WAREHOUSE TO ENSURE THAT EXACTLY THE RIGHT AMOUNT OF ABSORBENTS ARE IN EACH KIT. OUR KITS ARE BOTH HIGHLY VISIBLE AND EXTREMELY PORTABLE AND BY USING THE BEST ABSORBENTS AVAILABLE, THESE ARE VERY MUCH THE GOLD STANDARD IN SPILL KITS. GOLD - THE GOLD STANDARD IN SPILL KITS. THE GOLD STANDARD IN SPILL KITS *2/' 63,//.,76 GOLD SPILL KITS

102. 97 Lubetech Steel Storage Units provide strong secure storage for a wide variety of products. Available in a variety of sizes from the larger IBC and drum stores to the smaller cabinets which are perfect for indoor storage of smaller containers such as solvents, paints and thinners etc. The larger drum and IBC stores can be used for secure outdoor storage. They come with easy to use sliding doors, integral liquid tight sumps to ensure safe containment of any leaks and drips, vented side panels to reduce condensation and a special roof construction to act as explosion relief in compliancy with HSG51 regulations. Treated with plastic coated exterior cladding for excellent corrosion resistance, these cabinets are built to last. The indoor storage cabinets have been designed to store Hazardous substances in accordance with CoSHH regulations. They include fully adjustable galvanised shelves, engineered ‘snag free’ handles and ‘2-point’ locking systems for premium security. ............................................................................................................................... ............................................................................................................................... ................................... STEEL STORAGE UNITS

112. 107 TECH FEATURES > Profiled fronts for increased strength and crush resistance ............................................................................................... > Optional drop front designs in the four wheeled bins for improved access to content ............................................................................................... > Locking front wheels on the four wheeled bins only ............................................................................................... YELLOW POLYETHYLENE WHEELED BINS 34-1010 34-1053 34-1008

39. BLACK & WHITE ABSORBENTS BLACK & WHITE ABSORBENTS HAVE BEEN DESIGNED TO PROVIDE EXCELLENT ABSORPTION RATES AND TO BE LONG LASTING. THIS COMBINATION OF PERFORMANCE AND ENDURANCE HAS BEEN ACHIEVED BY USING A THICKER THAN USUAL COVERSTOCK COMBINED WITH A HIGH LOFT FILLING. AS WELL AS BEING EXCEPTIONALLY STRONG, THESE ABSORBENTS ARE SCUFF RESISTANT ON ONE SIDE MAKING THEM IDEAL FOR USE ON WALKWAYS. THE SUPERIOR STRENGTH OF THESE ABSORBENTS ALSO MAKES THEM PERFECT FOR WHEN ONLY A SMALL AMOUNT OF ABSORBENT IS REQUIRED. AVAILABLE IN THE USUAL FORMATS FOR MAINTENANCE, OIL-ONLY AND CHEMICAL SPILLS, THESE ABSORBENTS FEATURE A TOP LAYER OF SPUN BOND COVERSTOCK WHILE THE REVERSE SIDE IS LEFT OPEN TO SPEED UP ABSORPTION RATES. BLACK & WHITE - PERFORMANCE AND ENDURANCE COMBINED. PERFORMANCE AND ENDURANCE COMBINED

23. SUPERIOR ABSORBENTS ARE ONE OF THE MOST WELL ESTABLISHED AND WELL REGARDED PRODUCTS WITHIN THE LUBETECH FAMILY OF ABSORBENTS. FIRSTLY, ALL SUPERIOR ABSORBENTS HAVE BEEN DESIGNED TO BE THICKER THAN NORMAL WHICH GREATLY INCREASES ABSORBENCY SPEED AND FLUID RETENTION. WITH A BALE HEIGHT OF OVER 50CM THESE ARE THE FASTEST ABSORBING MATERIALS THAT WE PRODUCE. IN ADDITION, THE CLEVER DIMPLED COVERSTOCK DESIGN HELPS TO REDUCE DRIPPING WHEN CLEARING UP SATURATED MATERIALS FOR DISPOSAL AND PROVIDES EXTRA TENSILE STRENGTH TO HELP THE ABSORBENTS GO FURTHER AND TO REDUCE THE CHANCE OF TEARING. AS WITH OUR OTHER RANGES, SUPERIOR PRODUCTS ARE AVAILABLE AS PADS, ROLLS, SOCKS AND COME IN A VARIETY OF FORMATS TO HELP YOU DEAL WITH ALL TYPES OF SPILLS WHETHER THEY BE OIL, CHEMICAL OR WATER BASED. SUPERIOR - WHEN STRENGTH IS PARAMOUNT. WHEN STRENGTH IS PARAMOUNT SUPERIOR ABSORBENTS

31. WHEN WE FIRST DEVELOPED OUR TOUGH N’SOFT RANGE THE IDEA WAS TO DEVELOP A RANGE OF ABSORBENTS THAT ARE TOUGH ON SPILLS BUT ALSO GOOD FOR MORE DETAILED WORK WHEN WIPING DOWN MACHINERY. GIVEN THE POPULARITY OF THIS RANGE IT WOULD APPEAR THAT WE HAVE SUCCEEDED. AS WITH ALL OUR OTHER PRODUCT RANGES, TOUGH N’SOFT ABSORBENTS COME IN THE FAMILIAR COLOUR CODED FORMATS TO HELP YOU CHOOSE WHICH TYPE OF ABSORBENT TO USE ON WHICH TYPE OF SPILL. THE SUPERBLY CONSTRUCTED PADS AND ROLLS ALL HAVE EXCELLENT ABSORBENT RATES AND ARE SOME OF THE MOST DURABLE ABSORBENTS CURRENTLY AVAILABLE. ADD TO THIS THE FACT THAT THESE PRODUCTS ARE TRIED AND TESTED AND HAVE AN EXCELLENT TRACK RECORD - THEY ARE VERY MUCH THE TECHNICAL CHOICE. TOUGH N’SOFT - THE TECHNICAL CHOICE. THE TECHNICAL CHOICE TOUGH N’SOFT ABSORBENTS

93. RENOWN SPILL CONTAINMENT PRODUCTS PROVIDE ANOTHER VITAL LAYER OF ENVIRONMENTAL PROTECTION, ESSENTIAL FOR COMPANIES WHO ARE LOOKING TO ACHIEVE THE ‘ISO 14001’ ACCREDITATION OR SIMPLY TO HELP THEM CONFORM TO THE CURRENT UK FLUID STORAGE REGULATIONS. MADE FROM 100% RECYCLABLE STRUCTURAL POLYETHYLENE, ALL THE UNITS WITHIN THE RENOWN RANGE HAVE BEEN DESIGNED TO BE BOTH STRONG YET LIGHT MAKING IT EASY TO MOVE UNLOADED UNITS AROUND THE WORKPLACE. EACH UNIT HAS BEEN SELECTIVELY DESIGNED TO ENSURE ROUTINE HOUSE-KEEPING DUTIES ARE KEPT HASSLE FREE. RENOWN WORKFLOORS ARE FULLY MODULAR WHILE THE DRUM AND IBC STORAGE UNITS COME READY FOR BOTH INDOOR AND OUTDOOR USE. EXCLUSIVE TO THE RENOWN RANGE IS A GROUP OF DRUM STORAGE CUPBOARDS WITH LOCKABLE DOORS AND A DRUM FUNNEL WITH AN INTEGRATED HINGED LID. RENOWN SPILL CONTAINMENT - DESIGNED TO PROTECT DESIGNED TO PROTECT RENOWN RENOWN SPILL CONTAINMENT

14. TECH FEATURES > Flexible outers to coral around tight corners ........................................................................................................... > Absorbs most aggressive chemicals ........................................................................................................... > Excellent absorbency ........................................................................................................... YELLOW GOLD CHEMICAL SOCK 9 TECH FEATURES > Designed for laboratory use ........................................................................................................... > Coloured to alert users of potential hazardous content ........................................................................................................... > Suitable for paint spray shops ........................................................................................................... YELLOW GOLD CHEMICAL PAD 69-1000 69-6000

55. CLASSIC ABSORBENTS TECH FEATURES > Hydrophobic - absorbs the oil, repels the water ........................................................................................................... > Plain heavyweight meltblown for maximum capacity ........................................................................................................... > Floats on water ........................................................................................................... ‘CLASSIC 3000’ PLAIN OIL-ONLY PAD TECH FEATURES > Lightweight for increased efficiency ........................................................................................................... > Plain and dimpled meltblown construction ........................................................................................................... > Rapid absorption rates ........................................................................................................... ‘CLASSIC 2000’ DIMPLED OIL-ONLY PAD 59-7003 57-7000

34. 29 TECH FEATURES > Mattressing effect for improved capacity ........................................................................................................... > Perforated for when only a small amount is needed ........................................................................................................... > Absorbs only oil and not water ........................................................................................................... ‘TOUGH N’SOFT’ OIL-ONLY PAD TECH FEATURES > Compact package for easy storage ........................................................................................................... > Completely hydrophobic - absorbs oil only ........................................................................................................... > Mobile hydraulic engineers favourite ........................................................................................................... ‘TOUGH N’SOFT’ OIL-ONLY ROLL N BOX 87-7000 87-7003

36. 87-6000 31 TECH FEATURES > Multiple perforations for increased productivity ........................................................................................................... > Absorbs most fluids including aggressives ........................................................................................................... > Suitable for small on-site laboratories ........................................................................................................... ‘TOUGH N’SOFT’ CHEMICAL ROLL N BOX TECH FEATURES > Fine fibre coverstock backing for improved wiping ........................................................................................................... > Yellow to alert users of potential hazardous content ........................................................................................................... > Bonded construction ........................................................................................................... ‘TOUGH N’SOFT’ CHEMICAL PAD 87-6003

28. 23 TECH FEATURES > Highly lofted creating voids for fluid penetration ........................................................................................................... > Bonded construction for improved fluid retention ........................................................................................................... > Compatible with our Spill Depot storage system ........................................................................................................... ‘SUPERIOR’ CHEMICAL ROLL TECH FEATURES > Suitable for use with most chemicals ........................................................................................................... > Absorbs up to 4 litres of fluid ........................................................................................................... > Also available in 3m length (not shown) ........................................................................................................... ‘SUPERIOR’ CHEMICAL SOCK 75-1000 75-6001

107. STEEL CABINETS Product Code Product Sump Capacity Dimensions (W x D x H) No. of Shelves Quantity 31-1175 Double Door Hazardous substance cabinet 14 Litres 900 x 460 x 1800mm 3 1 31-1176 Double Door Hazardous substance cabinet 14 Litres 900 x 460 x 900mm 1 1 31-1177 Single Door Hazardous substance cabinet 7 Litres 460 x 460 x 900mm 1 1 31-1175 31-1176

53. CLASSIC ABSORBENTS TECH FEATURES > Spun bond outer skin - absorbs only oil ........................................................................................................... > Flexible so ideal for using where space is limited ........................................................................................................... > Use to soak up oil spills ........................................................................................................... ‘CLASSIC’ OIL-ONLY PILLOW TECH FEATURES > Highly absorbent meltblown fill - absorbs oil only ........................................................................................................... > Fitted with clips to form a continuous boom ........................................................................................................... > Floats on water even when saturated with oil ........................................................................................................... ‘CLASSIC’ OIL-ONLY SPAGHETTI MARINE BOOM 57-7009 57-3045

110. 15-1015 15-1090 105 TECH FEATURES > Designed for handling standard 205 litre steel drums, max weight 500Kg ............................................................................................... > Robust construction for demanding industrial environments ............................................................................................... SINGLE DRUM CLAMP TECH FEATURES > Suitable for fuels & oils only (excluding petroleum fuels) ............................................................................................... > Pumps at a rate of 200cc per revolution ............................................................................................... CAST IRON ROTARY PUMP - 205 LTR DRUM 34-1022

62. 57 Lubetech Spill Response Kits are designed to be kept in the work environment ready for when a quick response is needed to a spill situation. Portable, moveable and highly visible, each kit is packed full of high quality Lubetech absorbent products including pads, socks, special absorbent pillows and disposal bags. Spill Kits are easy to choose from as they are available in a variety of sizes and formats according to the quantity and type of fluid that needs to be absorbed. The smallest 10 litre kits are for small one off use, while the biggest kits will absorb up to 1,000 litres for larger spills. In addition to a choice of sizes, our kits come in three distinct formats according to the type of spill. Maintenance Spill Kits contain black coloured absorbents and should be used for general day to day spills as they will absorb most fluid types including oil and water at the same time. Oil-only Spill Kits contain absorbents that will only absorb oil and are perfect for absorbing oil from water leaving the water completely oil free. The Chemical Spill kits contain yellow absorbents that will absorb almost every kind of fluid including hazardous fluids such as acids and solvents. SPILL RESPONSE KITS ............................................................................................................................... ............................................................................................................................... ...................................

80. 75 Spill containment products are all about providing a physical barrier to prevent potentially harmful fluids entering into the eco system. There are now strict laws in the UK that govern how fluids should be stored and our Spill Containment products will help you conform to these regulations. Designed and built to the highest standard, our range includes a range of spill trays to help you store small amounts of fluids, spill pallets and bunded flooring to collect leaks and spills, our all weather range for safe drum storage and our proven IBC storage systems. All our Spill Containment products are made from moulded polyethylene, providing strength and long term weather resistance. As well as being extremely strong, they are also very easy to clean – vital when cleaning out leaks and drips during regular house keeping duties. Designed for both outdoor and indoor use, these products can be relied on to help you protect the environment. ............................................................................................................................... ............................................................................................................................... ................................... SPILL CONTAINMENT

106. 101 TECH FEATURES > Designed to store Hazardous substances in accordance with CoSHH regulations ................................................................................................. > Engineered ‘snag free’ handle with a secure ‘2-point’ locking system ................................................................................................. > Integral liquid tight sump to contain leaks and drips ................................................................................................. > Adjustable galvanised shelves ................................................................................................. > Finished in high visibility yellow polyester powder coating ................................................................................................. > Other cabinet sizes available ................................................................................................. HAZARDOUS SUBSTANCE CABINET 31-1177

6. 1 Lubetech Absorbents were created to help industry clear up fluid spills of all kinds and sizes preventing potentially harmful fluids from damaging the environment. We have six distinct absorbent ranges to choose from, Gold, Natural, Superior, Tough n Soft, Black & White and Classic. Each of these ranges has unique performance characteristics to suit your individual requirements. Select Gold for the highest absorption rates. For maximum benefit to the environment, use our Natural range as they are the first genuine high performance absorbents made from naturally occurring cellulose and cotton. Choose Superior for its absorption speed, Tough n’ Soft for more technical wiping applications, Black & White for endurance and Classic for plain, simple performance. Each of the above product ranges come in a variety of formats including pads, rolls and socks. Use Pads to absorb small spills and to wipe down surfaces. Rolls enable you to tear off the exact amount of absorbent that you require thereby reducing wastage. Socks can either be used to encircle spills or can be placed next to leaking machinery. If you are not sure which range to choose simply call the Lubetech helpline on 023 8027 4123. ............................................................................................................................... ............................................................................................................................... ................................... ABSORBENTS

42. 37 TECH FEATURES > Sewn spun bond outer for durability ........................................................................................................... > Fully hydrophobic - absorbs oil not water ........................................................................................................... > Floats on water ........................................................................................................... ‘BLACK & WHITE’ OIL-ONLY SOCK TECH FEATURES > Perforated for multiple applications ........................................................................................................... > Absorbs oil and repels water ........................................................................................................... > Perfect for mechanical engineering workshops ........................................................................................................... ‘BLACK & WHITE’ OIL-ONLY ROLLS 77-3000 77-7002 77-7001

60. TM MODULAR DISPENSING UNITS 55 Product Code Product Dimensions (W x D x H) Quantity DEPOT-1 ‘Spill Depot’ Dispensing Module 600 x 450 x 600mm 1 DEPOT-2 ‘Spill Depot’ 2-Part Modular Dispensing Unit 600 x 450 x 1270mm 1 DEPOT-4 ‘Spill Depot’ 2-Part Modular Cabinet & Dispensing Unit 600 x 450 x 1270mm 1 DEPOT-5 ‘Spill Depot’ 3-Part Modular Cabinet & Dispensing Unit 600 x 450 x 1870mm 1 DEPOT-2 DEPOT-1

7. ABSORBENTS ABSORBENTS Oxeye Daisies (Leucanthemum Vulgare) OIL-ONLY Oil-Only products are always white in colour and should only be used in the event of oil based spills such as lubricants, fuels and even vegetable oils. Using Hydrophobic technology, they only absorb oil and not water and will remain buoyant even when saturated with oil. MAINTENANCE Maintenance products are black in colour and will absorb all kinds of industrial liquids including oil based and water based spills. Ideal for use in industrial situations where many different kinds of liquids are present at the same time. CHEMICAL Our Chemical products are yellow in colour for easy recognition and are designed to absorb more aggressive fluids such as acids, kerosene and detergents. They are ideal for use in situations such as laboratories and Chemical plants.

114. 109 First consideration in an outdoor spill situation is to protect fluids from entering into the drain system as eventually, what goes into the drain ends up in our river systems potentially causing serious degradation to fauna and flora. As a first line of defence we have a range of polyurethane drain covers which can be placed over the drain to stop fluids entering the network while the bulk of the spill is cleared using absorbent materials such as pads, socks and booms. Polyurethane drain covers are available in three different sizes with the option of wall mountable, high visibility vinyl holdall bags for convenient and accessible storage. Performing a similar function to the polyurethane drain covers, but designed for one off use only, we have the Bentonite clay drain mats which are available in two sizes. Finally, there are the mechanical drain covers which form a more permanent barrier for optimum peace of mind where the event of drain contamination could result in an environmental crisis. These drain covers use a bespoke locking device coupled with a special neoprene seal which forms an effective chemical resistant barrier in demanding conditions. ............................................................................................................................... ............................................................................................................................... ................................... DRAIN PROTECTION

51. CLASSIC ABSORBENTS TECH FEATURES > Fine fibre coverstock for smear free wiping ........................................................................................................... > Convenient box dispenser ........................................................................................................... > Criss-Cross perforations for improved productivity ........................................................................................................... ‘CLASSIC’ 3000 MAINTENANCE ROLL N’ BOX TECH FEATURES > Sewn spun bond outer for durability ........................................................................................................... > Absorbs more than 4.0 litres per sock ........................................................................................................... > Absorbs oil and water at the same time ........................................................................................................... ‘CLASSIC’ MAINTENANCE SOCK 57-2000 57-5004

47. CLASSIC ABSORBENTS CLASSIC ABSORBENTS ARE THE ORIGINAL WORKHORSE ABSORBENT BRAND. DESIGNED TO BE SIMPLE, WITH NO FRILLS, WE HAVE USED HARD WORKING MATERIALS THAT PROVIDE GOOD PERFORMANCE. CLASSIC ABSORBENTS ARE SUITED FOR ALL TYPES OF USE AND ARE POPULAR WITH COMPANIES WHO USE LARGE AMOUNTS OF ABSORBENTS ON INDIVIDUAL SPILLS. THE CLASSIC OIL-ONLY PRODUCTS HAVE BEEN SPECIALLY DESIGNED FOR MARINE SPILL CONTROL USE. THE OIL-ONLY BOOMS ARE PERFECT FOR OPEN WATER APPLICATION AND CAN BE JOINED TOGETHER TO FORM A CONTINUOUS BOOM WHILE THE OIL-ONLY ABSORBENT ROLLS HAVE BEEN MADE WITHOUT PERFORATIONS FOR WIDE AREA USE. PADS, ROLLS, SOCKS, PILLOWS AND BOOMS ALL FORM PART OF THIS BENCHMARK BRAND - HELPING YOU PROTECT THE ENVIRONMENT. CLASSIC ABSORBENTS - PLAIN AND SIMPLE. PLAIN AND SIMPLE

67. GOLD SPILL KITS Pads 25 Socks 3 Pillows 2 Bags & Ties 5 50 LTR CONTENTS 50 LITRES Product Code Type Product Absorbency Quantity 18-1050 Maintenance 50 Litre ‘Black Gold’ Vinyl Holdall 50 Litres Per Kit 1 28-1050 Oil-Only 50 Litre ‘Black Gold’ Vinyl Holdall 50 Litres Per Kit 1 08-1050 Chemical 50 Litre ‘Black Gold’ Vinyl Holdall 50 Litres Per Kit 1 18-1050 08-1050 28-1050

100. RENOWN 95 DRUM CUPBOARDS TECH FEATURES > Lockable doors ........................................................................................................... > Removable grate to assist house keeping duties ........................................................................................................... > Compatible with most chemicals, guide available on request ........................................................................................................... > Made from recyclable structural grade polyethylene ........................................................................................................... > Designed for the safe storage of a multiple of fluid containers including paints ........................................................................................................... > Suitable for battery storage ........................................................................................................... POLYETHYLENE DRUM CUPBOARDS 31-1383 31-1384

37. TOUGH N’SOFT ABSORBENTS TECH FEATURES > Dimpled construction for extra endurance ........................................................................................................... > Superb absorption and retention rates ........................................................................................................... > Perforated for convenience ........................................................................................................... ‘TOUGH N’SOFT’ CHEMICAL ROLL Product Code Product Absorbency Dimensions Quantity 87-6000 ‘Tough n’soft’ Chemical Pad 1 Litre Per Pad 50cm x 40cm 100 87-6001 ‘Tough n’soft’ Chemical Roll 100 Litres Per Roll 50cm x 40m 1 87-6003 ‘Tough n’soft’ Chemical Roll n’ box 40 Litres Per Roll 40cm x 20m 1 87-6001

94. 89 RENOWN TECH FEATURES > Removable grate ........................................................................................................... > Fully modular system ........................................................................................................... > 150mm high low profile design ........................................................................................................... 2-DRUM POLYETHYLENE WORKFLOOR 31-1253 31-1254 TECH FEATURES > Safe working load capacity - 2000Kg ........................................................................................................... > Available as a 4-drum in-line unit - code - 31-1352 ........................................................................................................... > Compatible with most chemicals, guide available on request ........................................................................................................... 4-DRUM POLYETHYLENE WORKFLOOR

15. TECH FEATURES > Perfect for bench protection ........................................................................................................... > Stitched edges for improved fluid retention ........................................................................................................... > Perforated for improved product productivity ........................................................................................................... YELLOW GOLD CHEMICAL ROLL Product Code Product Absorbency Dimensions Quantity 69-1000 Yellow Gold Sock 5 Litres Per Sock 8.5cm x 1.2m 12 69-6000 Yellow Gold Pad 1.2 Litres Per Pad 50cm x 40cm 100 69-6001 Yellow Gold Roll 90 Litres Per Roll 38cm x 40m 1 69-6001 GOLD ABSORBENTS

72. STATIC BIN Product Code Type Product Absorbency Quantity 14-1080 Maintenance 80 Litre Superior Static Bin 80 Litres Per Kit 1 24-1080 Oil-Only 80 Litre Superior Static Bin 80 Litres Per Kit 1 04-1080 Chemical 80 Litre Superior Static Bin 80 Litres Per Kit 1 Pads 40 Socks 5 Pillows 4 Bags & Ties 6 80 LTR CONTENTS 80 LITRES 67 14-1080 24-1080

108. 103 ANCILLARIES & SPILL KIT COMPONENTS To compliment our range of spill kits, we offer a range of spill kit components for when a unit has been damaged or items misplaced. The two and four wheeled bin designs include unique contoured front panels for improved durability and include an option of drop down fronts for the four wheeled range for improved access to stored contents. The Lubetech ancillaries range has been carefully selected as prime products that further support our strategy of promoting clean and safe working environments. The Oil Safe fluid transfer system is internationally recognised by leading companies as the optimum solution for oil storage and dispensing in workshops. The range includes four different drum sizes, along with four colour coded lid options helping prevent cross contamination and misapplication of oils. Where safe handling of 205 litre steel drums is required, our forklift mounted drum lifter has been designed to endure the most demanding environments with a simple and proven clamp mechanism. ............................................................................................................................... ............................................................................................................................... ...................................

118. 113 Lubetech Absorbent Granules provide effective ingredients for cleaning up both indoor and outdoor spills. Especially suited for indoor use, XR70 industrial cellulose granules are light weight for easy handling and will absorb a wide variety of liquids. The Lubetech XR60 Industrial general purpose granules are a naturally occurring mineral called Attapulgite which can be used for absorbing most fluids including water, oil and fuels. The XR85 is a 1st grade Sepiolite construction granule used for absorbing oils, grease and water. Regular applications include construction sites, business park roadways and communal areas. The irregular granulation improves skid resistance, supports excellent absorption capacity and the natural hardness of the product protects against physical collapse when deployed in high traffic areas. The XR99 is a premium grade highway micro granule. It is a calcinated Danish Molar clay which offers maximum anti skid protection, (compliant with AFNOR NF P 90-198, European Road Safety Regulations), superior absorbency rates and following the clean-up operation, leaves the surface dust and stain free. All Lubetech granules are chemically inert and fire retardant BS 476 Part 7, Class 1 rated. ............................................................................................................................... ............................................................................................................................... ................................... GRANULES

81. Taman Negara National Park, Malaysia ABSORBENTS SPILL CONTAINMENT WHO NEEDS TO COMPLY? WHATS REQUIRED? To protect the environment, businesses across the UK are now obliged to conform to a series of laws that relate to the safe storage of fluids. Lubetech Spill containment products have been designed to help companies meet with these requirements. This applies to any industrial, commercial or institutional site storing 200 litres or more of oil or fuel above ground in one or more containers. In England & Wales the regulations only apply to outdoor storage, although the recommended ‘Prevention Pollution Guidelines’ from the Environment Agency would apply to indoor storage. In Scotland the regulations apply to both outdoor and indoor storage. All containers storing oil or fuel, whether a drum, an IBC or a tank, must be sufficiently bunded within themselves or stood on a spill pallet or drip tray that provides sufficient secondary containment. The bund must have sufficient capacity to: • Contain 110% of the contents of the largest container; or • 25% of the total capacity stored, whichever is the greater. In the case of single drums, a drip tray with a capacity of 25% of the contents is normally acceptable, apart from drums sited in high-risk areas.

96. RENOWN 91 31-1244 31-1245 TECH FEATURES > Low profile for safe drum handling operations ........................................................................................................... > Raised edge up-stands for improved operator safety ........................................................................................................... > Safe working load capacity - 400Kg ........................................................................................................... RAMP TO SUIT 4-DRUM ‘HARD TOP’ POLYETHYLENE SPILL PALLET TECH FEATURES > Single user friendly and lockable roll door ........................................................................................................... > Integral base fork pockets for safe transportation of empty units ........................................................................................................... > Provides excellent protection against weather and foliage debris ........................................................................................................... 4-DRUM ‘HARD TOP’ POLYETHYLENE SPILL PALLET

98. RENOWN 93 TECH FEATURES > Provides excellent protection against weather and foliage debris ........................................................................................................... > Safe working load capacity - 1500Kg ........................................................................................................... > Heavy duty vinyl tarp cover ........................................................................................................... SINGLE IBC ‘ALL WEATHER’ SPILL PALLET C/W WITH GRATING TECH FEATURES > Compatible dispensing tray available - product code - 31-1346 ........................................................................................................... > Safe working load capacity - 1500Kg ........................................................................................................... > Removable grate to assist house keeping duties ........................................................................................................... SINGLE IBC SPILL PALLET C/W WITH GRATING 31-1213 31-1343 31-1344

2. INTRODUCTION At Lubetech we strive to make a difference. Over the past decade we have specialised in the development and distribution of a variety of absorbents and spill control products designed to help industry protect the environment from contamination caused by fluid spills. Today right across the world environmental awareness has become mainstream. For many people the decision to choose a product or service is now affected by the green credentials of the supplier. Lubetech is part of this change and although we are a business which aims to be profitable we are proud to be part of the growing network of companies who are making a real contribution to the protection of the environment. Our products are simple to use but where a little more know how is required for ISO 14001 accreditation or where companies are planning to implement an Environmental Management System (EMS) you might find one of our three levels of spill response training courses beneficial. Each course is site specific with a clear message designed to help individual clients reduce the risk of adversely causing harm to the environment. For further detail about our courses call our Customer Support team on 023 8027 4123. The purpose of this catalogue is to show you our products and to show you how and where they can be applied. ............................................................................................................................... ............................................................................................................................... ...................

29. TECH FEATURES > Mattressing effect for improved capacity ........................................................................................................... > Centre perforated for delicate applications ........................................................................................................... > Fast absorbency ........................................................................................................... ‘SUPERIOR’ CHEMICAL PAD Product Code Product Absorbency Dimensions Quantity 75-1000 ‘Superior’ Chemical Sock 4 Litres Per Sock 7.5cm x 1.2m 20 75-1001 ‘Superior’ Chemical Sock 10 Litres Per Sock 7.5cm x 3m 8 75-6000 ‘Superior’ Chemical Pad 1.2 Litres Per Pad 50cm x 40cm 100 75-6001 ‘Superior’ Chemical Roll 120 Litres Per Roll 50cm x 40m 1 75-6000 SUPERIOR ABSORBENTS

83. THE PRESTIGE SPILL CONTAINMENT RANGE OFFERS A COMPREHENSIVE CHOICE OF SPILL CONTAINMENT PRODUCTS, ALL DESIGNED TO HELP PROTECT THE ENVIRONMENT. ALL PRESTIGE UNITS HAVE BEEN DESIGNED TO WORK IN THE MOST CHALLENGING INDUSTRIAL ENVIRONMENTS AND ARE MANUFACTURED FROM 100% RECYCLABLE INDUSTRIAL GRADE POLYETHYLENE MAKING THESE PRODUCTS EXTREMELY STRONG AND DURABLE. THE LARGER HEAVIER PRODUCTS HAVE BEEN DESIGNED WITH MOULDED FORK LIFT SPACES FOR EASY AND SAFE HANDLING OF EMPTY UNITS. THE MODULAR SPILL PLATFORMS CAN BE LINKED TOGETHER TO FORM A BUNDED AREA TO SUIT THE SPACE AVAILABLE MAKING THEM IDEAL FOR INTERNAL DRUM STORAGE. BOTH THE TWO AND FOUR DRUM SPILL PALLETS INCLUDE COVERED VERSIONS PROVIDING YEAR ROUND WEATHER PROTECTION FOR OUTDOOR STORAGE. THE PRESTIGE IBC UNIT MOULD DESIGN INCLUDES ROUNDED CORNERS FOR INCREASED STRENGTH, RESULTING IN IMPROVED LOAD CAPACITY. ALL LOAD GRATES IN THE PRESTIGE RANGE ARE MOULDED WITH A DOUBLE WALL TO PROVIDE EXTRA STRENGTH. GRATES FOR THE SMALL DRUM TRAYS AND SPILL PLATFORMS INCLUDE A UNIQUE ANTI-SLIP SURFACE FOR IMPROVED OPERATOR SAFETY. THE PRESTIGE DRUM TRANSPORTER AND DISPENSER HAS BEEN ERGONOMICALLY DESIGNED FOR SAFE AND EASY HANDLING OF 205 LITRE DRUMS. HELPING YOUR GREEN CREDENTIALS PRESTIGE SPILL CONTAINMENT SPILL CONTAINMENT

5. GRANULES PRODUCT INDEX SPILL CONTAINMENT STEEL STORAGE UNITS ANCILLARIES & SPILL KIT COMPONENTS DRAIN PROTECTION PAGE 75 PAGE 103 PAGE 109 PAGE 113 PAGE 97 PAGE 117 ABSORBENTS CONTENTS

121. GRANULES > Excellent for Highway spills ................................................................................................. > Rapid absorption speeds ................................................................................................. > Conforms to European Road Safety Regulations ................................................................................................. HIGHWAY XR99 OUTDOOR GRANULES TECH FEATURES > Remains granular when saturated ................................................................................................. > Leaves no greasy residue ................................................................................................. > Irregular granulation for improved skid resistance ................................................................................................. CONSTRUCTION XR85 OUTDOOR GRANULES TECH FEATURES CLAY GRANULES 11-1085 11-1070

17. natural Sustainable Absorbents LUBETECH NATURAL ABSORBENTS ARE MANUFACTURED FROM NATURALLY OCCURRING CELLULOSE OR COTTON AND WERE THE FIRST VIABLE, ECOFRIENDLY ALTERNATIVES TO MAN MADE PRODUCTS. NOT ONLY ARE THESE ABSORBENTS EXCELLENT NEWS FOR THE ENVIRONMENT, THEY ALSO PERFORM WELL, DEMONSTRATING ABSORBENCY RATES AS GOOD AS, IF NOT BETTER THAN THE NORMAL MAN MADE ABSORBENTS. WE HAVE TWO TYPES OF ABSORBENTS IN OUR NATURAL RANGE. FIRST WE HAVE OUR ECOFIBRE PRODUCTS WHICH ARE MADE FROM WOOD CELLULOSE AND DESIGNED FOR GENERAL MAINTENANCE USE. THEY WILL ABSORB A VARIETY OF FLUIDS INCLUDING BOTH OIL AND WATER AT THE SAME TIME MAKING THESE EXTREMELY VERSATILE. NEXT WE HAVE OUR NATURAL COTTON ABSORBENTS. THESE ARE MADE FROM COTTON, ONE OF THE BEST NATURALLY OCCURRING FIBRES AND ARE DESIGNED TO ABSORB OIL SPILLS FROM BOTH LAND AND WATERBASED SITUATIONS. THEY ARE HYDROPHOBIC WHICH MEANS THAT THEY WILL ABSORB ONLY OIL AND REPELL WATER LEAVING THE WATER COMPLETELY OIL FREE. ALL OUR NATURAL PRODUCTS ARE AVAILABLE IN A VARIETY OF FORMATS INCLUDING PADS, ROLLS, SOCKS AND SPILL KITS SO IF YOU ARE TRYING TO IMPROVE YOUR GREEN CREDENTIALS THEN THESE ABSORBENTS ARE THE NATURAL CHOICE. ABSORBENTS THAT WILL NOT COST THE EARTH 12 NATURAL ABSORBENTS

89. DISPENSING TRAY POLYETHYLENE DISPENSING TRAY POLYETHYLENE PRESTIGE SPILL CONTAINMENT TECH FEATURES > Suitable for storing 2 x IBC’s, 8 x 205 litre drums or a combination of both ........................................................................................................... > Safe working load capacity - 4000Kg ........................................................................................................... > Compatible dispensing tray available, code: 31-3074 ........................................................................................................... DOUBLE IBC POLYETHYLENE SPILL PALLET C/W LOAD PLATFORMS TECH FEATURES > Compatible dispensing tray available, code - 31-3072 ........................................................................................................... > Safe working load capacity - 2000Kg ........................................................................................................... > Also available with load platform, code - 31-3071 ........................................................................................................... SINGLE IBC POLYETHYLENE SPILL PALLET 31-3073 31-3074 31-3072 31-3070

43. BLACK & WHITE ABSORBENTS TECH FEATURES > Heavy duty coverstock for increased tear strength ........................................................................................................... > Fully hydrophobic - floats on water ........................................................................................................... > Ideal for hydraulic engineers ........................................................................................................... ‘BLACK & WHITE’ OIL-ONLY PAD Product Code Product Absorbency Dimensions Quantity 77-3000 ‘Black & White’ Oil-Only Sock 3 Litres Per Sock 6cm x 1.2m 20 77-7000 ‘Black & White’ Oil-Only Pad 0.8 Litres Per Pad 50cm x 40cm 100 77-7001 ‘Black & White’ Oil-Only Roll 80 Litres Per Roll 50cm x 40m 1 77-7002 ‘Black & White’ Oil-Only Roll 144 Litres Per Roll 90cm x 40m 1 77-7000

56. 51 TECH FEATURES > Lightweight and double sided for strength ........................................................................................................... > Low lint release for a cleaner job ........................................................................................................... > Absorbs most chemicals including acids ........................................................................................................... ‘CLASSIC 2000’ DOUBLE SIDED CHEMICAL PAD TECH FEATURES > Heavyweight dimpled construction ........................................................................................................... > Increased loft for better absorption ........................................................................................................... > Use to absorb all fluids including aggressives ........................................................................................................... ‘CLASSIC 3000’ DIMPLED CHEMICAL PAD TECH FEATURES > High tensile strength nylon outer netting ........................................................................................................... > Designed for coraling spills on hard surfaces ........................................................................................................... > Can be linked to create a continuous single boom ........................................................................................................... ‘CLASSIC’ CHEMICAL BOOM 59-6000 57-1005 57-6003

84. WORKFLOOR RAMP POLYETHYLENE SPILL CONTAINMENT 79 TECH FEATURES > Versatile modular system ........................................................................................................... > Slip resistant removable platform ........................................................................................................... > Safe working load capacity - 1350Kg ........................................................................................................... 2-DRUM POLYETHYLENE WORKFLOOR TECH FEATURES > Removable injection moulded grate ........................................................................................................... > Curved product profile for maximum rigidity ........................................................................................................... > Safe working load capacity - 1350Kg ........................................................................................................... 2-DRUM POLYETHYLENE SPILL PALLET TECH FEATURES > Compatible with 2 and 4 drum workfloors ........................................................................................................... > Integrated locking pins for stability ........................................................................................................... > Low gradient for stress free operations ........................................................................................................... POLYETHYLENE SPILL PLATFORM RAMP 31-3022 31-3004 31-3002

49. CLASSIC ABSORBENTS TECH FEATURES > Heavyweight with double sided coverstock ........................................................................................................... > Perforated so suitable for minor spills ........................................................................................................... > Low lint release for a cleaner job ........................................................................................................... ‘CLASSIC 3000’ DOUBLE SIDED MAINTENANCE PAD TECH FEATURES > Heavyweight open meltblown polypropylene ................................................................. .......................................... > Higher loft for improved fluid retention ........................................................................................................... > Dimpled construction for increased strength ........................................................................................................... ‘CLASSIC 3000’ DIMPLED MAINTENANCE PAD TECH FEATURES > Double sided for reduced snagging ........................................................................................................... > Excellent tensile strength ........................................................................................................... > Suitable for the aerospace industry ........................................................................................................... ‘CLASSIC 2000’ DOUBLE SIDED MAINTENANCE PAD 57-5003 59-5000 57-5000

87. PRESTIGE SPILL CONTAINMENT TECH FEATURES > Safe storage and dispensing ........................................................................................................... > Stores drums at slight angle to prevent condensation being decanted ........................................................................................................... > Safe working load capacity - 1350Kg ........................................................................................................... 2-DRUM POLYETHYLENE BASE UNIT TECH FEATURES > Moulded fork lift slots for safe handling ........................................................................................................... > Made from recyclable structural grade polyethylene ........................................................................................................... > Compatible with the stacking base unit - 31-3036 ........................................................................................................... 2-DRUM POLYETHYLENE STACKING UNIT TECH FEATURES > Suitable for decanting 205ltr drums ........................................................................................................... > Double walled construction ........................................................................................................... > Swivel castors for safe transport of 205ltr drums ........................................................................................................... POLYETHYLENE DRUM TRANSPORTER AND DISPENSER 31-3036 31-3037 31-3060

101. RENOWN SPILL CONTAINMENT Product Code Product Sump Capacity Dimensions (W x D x H) No. of Shelves Quantity 31-1382 ‘Renown’ Polyethylene Drum Cupboard 30 Litres 550 x 440 x 990mm 2 1 31-1383 ‘Renown’ Polyethylene Drum Cupboard 70 Litres 650 x 570 x 1650mm 3 1 31-1384 ‘Renown’ Polyethylene 205 Litre Drum Cupboard 250 Litres 720 x 920 x 1840mm 0 1 31-1385 ‘Renown’ Polyethylene Drum Cupboard 250 Litres 720 x 920 x 1840mm 1 1 31-1386 ‘Renown’ Polyethylene Drum Cupboard 100 Litres 720 x 920 x 1520mm 1 1 31-1382 31-1385 31-1386

20. TECH FEATURES > Cotton obtained from sustainable sources ........................................................................................................... > Exceptional absorbency rates ........................................................................................................... > Perforated for convenience ........................................................................................................... ‘COTTON’ OIL-ONLY ROLL 15 natural Oil-Only TECH FEATURES > 100% natural Cotton fill ........................................................................................ > Spunbond coverstock ........................................................................................ > Market leading absorbency ........................................................................................ ‘COTTON’ OIL-ONLY PAD Product Code Product Absorbency Dimensions Quantity 99-7000 ‘Cotton’ Oil-only Pad 1.4 Litres Per Pad 48cm x 38cm 100 99-7001 ‘Cotton’ Oil-only Roll 108 Litres Per Roll 37cm x 38m 1 99-7001 99-7000

32. 27 TECH FEATURES > Perforated for increased productivity ........................................................................................................... > Compatible with our Spill Depot storage system ........................................................................................................... > Fine fibre backing for smear free wiping ........................................................................................................... ‘TOUGH N’SOFT’ MAINTENANCE ROLL TECH FEATURES > Combined performance and strength ........................................................................................................... > Sealed edges for increased fluid retention ........................................................................................................... > Fine fibre backing for smear free wiping ........................................................................................................... ‘TOUGH N’SOFT’ MAINTENANCE PADS Product Code Product Absorbency Dimensions Quantity 87-5000 ‘Tough n’soft’ Maintenance Pad 1 Litre Per Pad 50cm x 40cm 100 87-5001 ‘Tough n’soft’ Maintenance Roll 100 Litres Per Roll 50cm x 40m 1 87-5003 ‘Tough n’soft’ Maintenance Roll n’ box 40 Litres Per Roll 40cm x 20m 1 87-5001 87-5000

13. TECH FEATURES > Fine fibre back for wiping applications ........................................................................................................... > High tear resistance ........................................................................................................... > Suitable for food industry applications ........................................................................................................... WHITE GOLD OIL-ONLY PAD TECH FEATURES > Suitable for demanding industries i.e. oil platforms ........................................................................................................... > Stitched edges for improved fluid retention ........................................................................................................... > Perforated sections for easy tear off ........................................................................................................... WHITE GOLD OIL-ONLY ROLL Product Code Product Absorbency Dimensions Quantity 69-3000 White Gold Sock 5 Litres Per Sock 8.5cm x 1.2m 12 69-7000 White Gold Pad 1.2 Litres Per Pad 50cm x 40cm 100 69-7001 White Gold Roll 90 Litres Per Roll 38cm x 40m 1 69-3000 69-7000 GOLD ABSORBENTS

86. SPILL CONTAINMENT 81 TECH FEATURES > Lockable and accessible from both sides ........................................................................................................... > Ribbed roll door for increased strength and security ........................................................................................................... > Moulded ground securing points for stability in exposed locations ........................................................................................................... 2-DRUM POLYETHYLENE ‘ALL WEATHER SPILL PALLET Product Code Product Capacity Dimensions (W x D x H) Quantity 31-3025 ‘Prestige’ 2-Drum ‘All Weather’ Spill Pallet 250 Litres 1560 x 1100 x 2110mm 1 31-3026 ‘Prestige’ 4-Drum ‘All Weather’ Spill Pallet 250 Litres 1560 x 1730 x 2110mm 1 31-3036 ‘Prestige’ 2-Drum Horizontal Racking Base Unit 450 Litres 1375 x 1350 x 635mm 1 31-3037 ‘Prestige’ 2-Drum Horizontal Racking Stacking Unit N/A 1375 x 940 x 390mm 1 31-3060 ‘Prestige’ Drum Transporter and Dispenser 250 Litres 815 x 1740 x 680mm 1 31-3025

11. TECH FEATURES > Stitched edge for improved fluid retention ........................................................................................................... > Ideal for aerospace and hi-tech industries ........................................................................................................... > Mattressing effect for improved capacity ........................................................................................................... BLACK GOLD MAINTENANCE PAD TECH FEATURES > Maximum fluid retention ........................................................................................................... > Doubles up as a bund when saturated ........................................................................................................... > Absorbs more than six litres ........................................................................................................... BLACK GOLD MAINTENANCE SOCK Product Code Product Absorbency Dimensions Quantity 69-2000 Black Gold Sock 6 Litres Per Sock 8.5cm x 1.2m 12 69-5000 Black Gold Pad 1.2 Litres Per Pad 50cm x 40cm 100 69-5001 Black Gold Roll 90 Litres Per Roll 38cm x 40m 1 69-5000 69-2000 GOLD ABSORBENTS

73. There are many other sizes of spill kits available from 10 litres to 1000 litres, please ask for further information. SUPERIOR SPILL KITS STATIC BIN 14-1125 Product Code Type Product Absorbency Quantity 14-1245 Maintenance 240 Litre Superior Static Bin 240 Litres Per Kit 1 24-1245 Oil-Only 240 Litre Superior Static Bin 240 Litres Per Kit 1 Product Code Type Product Absorbency Quantity 14-1125 Maintenance 120 Litre Superior Static Bin 120 Litres Per Kit 1 24-1125 Oil-Only 120 Litre Superior Static Bin 120 Litres Per Kit 1 CONTENTS CONTENTS PADS X 150 - SOCKS X 6 - PILLOWS X 10 - FLOOR SIGN X 1 HAZARD TAPE X 1 - BAGS & TIES X 18 PADS X 60 - SOCKS X 4 - PILLOWS X 8 - BAGS & TIES X 10 240 LITRES 12 0 LITRES

88. SPILL CONTAINMENT 83 Product Code Product Capacity Dimensions (W x D x H) Quantity 31-3070 ‘Prestige’ Single IBC Spill Pallet 1100 Litres 1450 x 1450 x 1000mm 1 31-3072 ‘Prestige’ Dispensing Tray for Single IBC Spill Pallet 100 Litres 640 x 590 x 1065mm 1 31-3073 ‘Prestige’ Double IBC Spill Pallet with c/w Load Platforms 1100 Litres 2450 x 1450 x 575mm 1 31-3074 ‘Prestige’ Dispensing Tray for Double IBC Spill Pallet 100 Litres 640 x 590 x 640mm 1 31-3075 ‘Prestige’ Single IBC Spill Pallet with Dispensing Well 1100 Litres 2000 x 1490 x 765mm 1 31-3075 TECH FEATURES > Integral dispensing area for safe decanting ........................................................................................................... > Available with load platform, product code 31-3076 ........................................................................................................... > Safe working load capacity - 2000Kg ........................................................................................................... SINGLE IBC POLYETHYLENE SPILL PALLET WITH DISPENSING WELL

19. ‘ECOFIBRE’ MAINTENANCE SPILL KIT HOLDALL ‘ECOFIBRE’ MAINTENANCE SPILL KIT WHEELED BIN CONTENTS Pads 90 Socks 6 Bags & Ties 10 CONTENTS Pads 35 Socks 4 Bags & Ties 5 50 LITRES 10 0 LITRES Product Code Type Product Absorbency Quantity 19-1050 Maintenance 50 Ltr ‘Ecofibre’ Spill Kit Holdall 50 Litres Per Kit 1 19-1120 Maintenance 100 Ltr ‘Ecofibre’ Spill Kit Wheeled Bin 100 Litres Per Kit 1 19-1120 19-1050 NATURAL ABSORBENTS

21. ‘COTTON’ OIL-ONLY SPILL KIT WHEELED BIN ‘COTTON’ OIL-ONLY SPILL KIT HOLDALL Product Code Type Product Absorbency Quantity 29-1050 Oil-only 50 Ltr ‘Cotton’ Spill Kit Holdall 50 Litres Per Kit 1 29-1120 Oil-only 100 Ltr ‘Cotton’ Spill Kit Wheeled Bin 100 Litres Per Kit 1 50 LITRES CONTENTS Pads 25 Socks 4 Bags & Ties 5 10 0 LITRES CONTENTS Pads 75 Socks 6 Bags & Ties 10 29-1120 29-1050 NATURAL ABSORBENTS

79. There are many other sizes of spill kits available from 10 litres to 1000 litres, please ask for further information. Bin Wheeled 120 LITRES 240 LITRES Pads 110 Socks 10 Bags & Ties 10 Contents: Pads 225 Socks 20 Bags & Ties 18 Contents: BLACK & WHITE SPILL KITS Product Code Product Absorbency Quantity 17-1120 120 litre Black & White Maintenance Spill Response Kit 120 Litres Per Kit 1 27-1120 120 litre Black & White Oil-Only Spill Response Kit 120 Litres Per Kit 1 07-1120 120 litre Black & White Chemical Spill Response Kit 120 Litres Per Kit 1 Product Code Product Absorbency Quantity 17-1240 240 litre Black & White Maintenance Spill Response 240 Litres Per Kit 1 27-1240 240 litre Black & White Oil-Only Spill Response Kit 240 Litres Per Kit 1 07-1240 240 litre Black & White Chemical Spill Response Kit 240 Litres Per Kit 1

113. SPILL KIT COMPONENTS Product Code Product Capacity Dimensions (W x D x H) Quantity 34-1007 140 Litre Yellow Polyethylene 2-Wheeled Bin 140 Litres 480 x 550 x 1050mm 1 34-1008 240 Litre Yellow Polyethylene 2-Wheeled Bin 240 Litres 580 x 740 x 1070mm 1 34-1009 360 Litre Yellow Polyethylene 2-Wheeled Bin 360 Litres 600 x 880 x 1100mm 1 34-1010 770 Litre Yellow Polyethylene 2-Wheeled Bin 770 Litres 1350 x 770 x 1360mm 1 34-1011 1000 Litre Yellow Polyethylene 2-Wheeled Bin 1000 Litres 1400 x 1330 x 1090mm 1 34-1052 770 Litre Yellow Polyethylene 4-Wheeled Bin c/w Drop Front 770 Litres 1350 x 770 x 1360mm 1 34-1053 1100 Litre Yellow Polyethylene 4-Wheeled Bin c/w Drop Front 1100 Litres 1400 x 1330 x 1090mm 1 34-1016 ‘Emergency Spill Kit Station’ Wall Sign N/A 400 x 230 x 3mm 1 34-1016

4. natural Sustainable Absorbents PERFORMANCE AND ENDURANCE COMBINED THE TECHNICAL CHOICE PLAIN AND SIMPLE WHEN STRENGTH IS PARAMOUNT ABSORBENTS THAT WILL NOT COST THE EARTH THE GOLD STANDARD IN ABSORBENTS PAGE 11 PAGE 17 PAGE 25 PAGE 33 PAGE 41 ABSORBENTS SPILL DEPOT SPILL RESPONSE KITS PAGE 3 PAGE 53 PAGE 57

105. STEEL DRUM STORES TECH FEATURES > Plastic coated exterior cladding for excellent corrosion resistance ........................................................................................................... > Includes high and low arrested ventilation ........................................................................................................... > Fully padlockable sliding doors ........................................................................................................... > Removable galvanised grate over entire floor area ........................................................................................................... > Roof constructed to act as explosion relief in compliance with HSG51 ........................................................................................................... > Stores available in green, blue, red or yellow ........................................................................................................... > Other store sizes available ........................................................................................................... STORAGE UNIT, SLIDING DOORS Product Code Product Sump Capacity Dimensions (W x D x H) No. of Shelves Quantity 31-1205 16 Drum Storage Unit Sliding Doors 1060 Litres 3000 x 1650 x 3100mm 2 1 31-1242 4 IBC Storage Unit Sliding Doors 1125 Litres 3000 x 1650 x 3350mm 2 1 31-1305 48 25 Ltr Drum Storage Unit Sliding Doors 450 Litres 2500 x 800 x 2350mm 3 1 31-1242 31-1305

48. 43 TECH FEATURES > Lightweight for increased productivity ........................................................................................................... > Quality consistency through proven production techniques ........................................................................................................... > Open meltblown for rapid absorption rates ........................................................................................................... ‘CLASSIC 2000’ DIMPLED MAINTENANCE PAD Product Code Product Absorbency Dimensions Quantity 59-5003 (12-1001 * ) ‘Classic 2000’ Maintenance Dimpled Pad 0.5 Litres Per Pad 50cm x 40cm 200 57-5003 (12-1052 * ) ‘Classic 3000’ Maintenance Dimpled Pad 1 Litre Per Pad 50cm x 40cm 100 59-5000 (12-1082 * ) ‘Classic 2000’ Maintenance Double Sided Pad 0.5 Litres Per Pad 50cm x 40cm 200 57-5000 (11-1000 * ) ‘Classic 3000’ Maintenance Double Sided Pad 0.8 Litres Per Pad 50cm x 40cm 100 * Denotes previously used product code 59-5003

27. TECH FEATURES > High tensile strength ........................................................................................................... > Perforated sections to reduce wastage ........................................................................................................... > Compatible with our Spill Depot storage system ........................................................................................................... ‘SUPERIOR’ OIL-ONLY ROLL TECH FEATURES > Unique skin stitch pattern ........................................................................................................... > Excellent absorbency and fluid retention ........................................................................................................... > Easy to deploy ........................................................................................................... ‘SUPERIOR’ OIL-ONLY SOCK Product Code Product Absorbency Dimensions Quantity 75-3000 ‘Superior’ Oil-Only Sock 4 Litres Per Sock 7.5cm x 1.2m 20 75-3001 ‘Superior’ Oil-Only Sock 10 Litres Per Sock 7.5cm x 3m 8 75-7000 ‘Superior’ Oil-Only Pad 1.2 Litres Per Pad 50cm x 40cm 100 75-7001 ‘Superior’ Oil-Only Roll 120 Litres Per Roll 50cm x 40m 1 75-3000 75-7001 SUPERIOR ABSORBENTS

35. TOUGH N’SOFT ABSORBENTS TECH FEATURES > Designed to suit standard 205 litre steel drums ........................................................................................................... > Pre-cut holes for access to drum contents ........................................................................................................... > Perfect for keeping the drum top clean ........................................................................................................... ‘TOUGH N’SOFT’ OIL-ONLY DRUM TOP COVER TECH FEATURES > Hydrophobic - absorbs oil not water ........................................................................................................... > Floats on water even when saturated with oil ........................................................................................................... > Perforated for convenience ........................................................................................................... ‘TOUGH N’SOFT’ OIL-ONLY ROLL N BOX Product Code Product Absorbency Dimensions Quantity 87-7000 ‘Tough n’soft’ Oil-Only Pad 1 Litre Per Pad 50cm x 40cm 100 87-7001 ‘Tough n’soft’ Oil-Only Roll 100 Litres Per Roll 50cm x 40m 1 87-7003 ‘Tough n’soft’ Oil-Only Roll n’ box 40 Litres Per Roll 40cm x 20m 1 87-7005 ‘Tough n’soft’ Oil-Only Drum Top Cover 1 Litre Per Cover 56cm Diameter 50 87-7005 87-7001

41. BLACK & WHITE ABSORBENTS TECH FEATURES > Open edges for quick absorption ........................................................................................................... > Coverstock prevents lint sticking to machine parts ........................................................................................................... > Strong and durable ........................................................................................................... ‘BLACK & WHITE’ MAINTENANCE PAD TECH FEATURES > Knitted outer skin with performance fill ........................................................................................................... > Absorbs more than 4 litres of fluid per sock ........................................................................................................... > Absorbs oil and water mix ........................................................................................................... ‘BLACK & WHITE’ MAINTENANCE SOCK Product Code Product Absorbency Dimensions Quantity 77-2000 ‘Black & White’ Maintenance Sock 4 Litres Per Sock 6cm x 1.2m 20 77-5000 ‘Black & White’ Maintenance Pad 0.8 Litres Per Pad 50cm x 40cm 100 77-5001 ‘Black & White’ Maintenance Roll 80 Litres Per Roll 50cm x 40m 1 77-5002 ‘Black & White’ Maintenance Roll 144 Litres Per Roll 90cm x 40m 1 77-5000 77-2000

25. TECH FEATURES > Suitable for heavy industry sectors ........................................................................................................... > Compatible with our Spill Depot storage system ........................................................................................................... > High loft to increase absorbency ........................................................................................................... ‘SUPERIOR’ MAINTENANCE ROLL TECH FEATURES > Open edged for rapid absorption ........................................................................................................... > Black cover stock to camouflage spills ........................................................................................................... > Extra thick to increase retention ........................................................................................................... ‘SUPERIOR’ MAINTENANCE PAD Product Code Product Absorbency Dimensions Quantity 75-2000 ‘Superior’ Maintenance Sock 5 Litres Per Sock 7.5cm x 1.2m 20 75-2001 ‘Superior’ Maintenance Sock 12.5 Litres Per Sock 7.5cm x 3m 8 75-5000 ‘Superior’ Maintenance Pad 1.2 Litres Per Pad 50cm x 40cm 100 75-5001 ‘Superior’ Maintenance Roll 120 Litres Per Roll 50cm x 40m 1 75-5001 75-5000 SUPERIOR ABSORBENTS

45. BLACK & WHITE ABSORBENTS TECH FEATURES > Sewn spun bond outer for durability ........................................................................................................... > Distinct colour for easy recognition ........................................................................................................... > Absorbs most fluids including aggressives ........................................................................................................... ‘BLACK & WHITE’ CHEMICAL SOCK TECH FEATURES > Perforations make these suitable for minor spills ........................................................................................................... > Absorbs most fluids - compatibility chart available ........................................................................................................... > Scuff resistant cover stock ........................................................................................................... ‘BLACK & WHITE’ CHEMICAL PAD Product Code Product Absorbency Dimensions Quantity 77-1000 ‘Black & White’ Chemical Sock 3 Litres Per Sock 6cm x 1.2m 20 77-6000 ‘Black & White’ Chemical Pad 0.8 Litres Per Pad 50cm x 40cm 100 77-6001 ‘Black & White’ Chemical Roll 80 Litres Per Roll 50cm x 40m 1 77-6002 ‘Black & White’ Chemical Roll 144 Litres Per Roll 90cm x 40m 1 77-1000 77-6000

97. RENOWN SPILL CONTAINMENT TECH FEATURES > Smooth surface for easy cleaning ........................................................................................................... > Safe working load capacity - 1250Kg ........................................................................................................... > Vinyl weather tarps available, product code 31-1231 ........................................................................................................... 4-DRUM POLYETHYLENE SPILL PALLET TECH FEATURES > Safe working load capacity - 650Kg ........................................................................................................... > Removable grate to assist house keeping duties ........................................................................................................... > Compatible with most pallet trucks for easy manoeuvring when unladen ........................................................................................................... 2-DRUM POLYETHYLENE SPILL PALLET Product Code Product Capacity Dimensions (W x D x H) Quantity 31-1257 2-Drum Polyethylene Spill Pallet 240 Litres 1220 x 820 x 330mm 1 31-1258 4-Drum Polyethylene Spill Pallet 230 Litres 1280 x 1280 x 280mm 1 31-1244 4-Drum ‘Hard Top’ Polyethylene Spill Pallet 410 Litres 1420 x 1420 x 2070mm 1 31-1245 Ramp to suit 4-drum hard cover Spill Pallets N/A 1000 x 1740 x 330mm 1 31-1258 31-1257

75. MOBILE 4 WHEELED DROP FRONT BIN There are many other sizes of spill kits available from 10 litres to 1000 litres, please ask for further information. SUPERIOR SPILL KITS Product Code Type Product Absorbency Quantity 24-1755 Oil-Only 600 Litre Superior Mobile 4 Wheeled Drop Front Bin 600 Litres Per Kit 1 Product Code Type Product Absorbency Quantity 14-1105 Maintenance 900 Litre Superior Mobile 4 Wheeled Drop Front Bin 900 Litres Per Kit 1 24-1105 Oil-Only 900 Litre Superior Mobile 4 Wheeled Drop Front Bin 900 Litres Per Kit 1 04-1105 Chemical 900 Litre Superior Mobile 4 Wheeled Drop Front Bin 900 Litres Per Kit 1 CONTENTS CONTENTS PADS X 190 - SOCKS (1.2 m ) X 20 - PILLOWS X 16 BOOMS X 4 - FLOOR SIGN X 1 - HAZARD TAPE X 1 - BAGS & TIES X 24 PADS X 300 - ROLLS X 2 - SOCKS (3 m ) X 6 - PILLOWS X 16 BOOMS X 6 - FLOOR SIGN X 1 - HAZARD TAPE X 1 - BAGS & TIES X 60 600 LITRES 900 LITRES 24-1755

90. 85 SPILL CONTAINMENT Product Code Product Capacity Dimensions (W x D x H) Quantity 31-3080 ‘Prestige’ 20 Ltr Spill Tray With Grate 20 Litres 600 x 400 x 155mm 1 31-3081 ‘Prestige’ 20 Ltr Spill Tray Without Grate 20 Litres 600 x 400 x 155mm 1 31-3082 ‘Prestige’ 30 Ltr Spill Tray With Grate 30 Litres 800 x 400 x 155mm 1 31-3083 ‘Prestige’ 30 Ltr Spill Tray Without Grate 30 Litres 800 x 400 x 155mm 1 31-3084 ‘Prestige’ 40 Ltr Spill Tray With Grate 40 Litres 800 x 600 x 155mm 1 31-3085 ‘Prestige’ 40 Ltr Spill Tray Without Grate 40 Litres 800 x 600 x 155mm 1 31-3086 ‘Prestige’ 60 Ltr Spill Tray With Grate 60 Litres 1000 x 600 x 155mm 1 31-3087 ‘Prestige’ 60 Ltr Spill Tray Without Grate 60 Litres 1000 x 600 x 155mm 1 31-3088 ‘Prestige’ 100 Ltr Spill Tray With Grate 100 Litres 1200 x 600 x 155mm 1 31-3089 ‘Prestige’ 100 Ltr Spill Tray Without Grate 100 Litres 1200 x 600 x 155mm 1 31-3086

85. PRESTIGE SPILL CONTAINMENT TECH FEATURES > Safe working load capacity - 2700Kg ........................................................................................................... > Versatile modular system ........................................................................................................... > Ideal for machine cleaning and lubricating duties ........................................................................................................... 4-DRUM POLYETHYLENE WORKFLOOR TECH FEATURES > Safe working load capacity - 2700Kg ........................................................................................................... > Compatible with most pallet trucks for easy manoeuvring when unladen ........................................................................................................... > Injection moulded grates & handles for easy removal ........................................................................................................... 4-DRUM POLYETHYLENE SPILL PALLET Product Code Product Capacity Dimensions (W x D x H) Quantity 31-3002 ‘Prestige’ 2-Drum Workfloor 120 Litres 1600 x 800 x 150mm 1 31-3003 ‘Prestige’ 4-Drum Workfloor 240 Litres 1600 x 1600 x 150mm 1 31-3004 ‘Prestige’ Workfloor Ramp N/A 1290 x 810 x 180mm 1 31-3022 ‘Prestige’ 2-Drum Spill Pallet 250 Litres 1300 x 750 x 440mm 1 31-3024 ‘Prestige’ 4-Drum Spill Pallet 250 Litres 1380 x 1290 x 280mm 1 31-3003 31-3024

70. CLIP CLOSE CARRIER 65 Product Code Type Product Absorbency Quantity 14-1015 Maintenance 15 Litre Superior Clip Close 15 Litres Per Kit 1 24-1015 Oil-Only 15 Litre Superior Clip Close 15 Litres Per Kit 1 04-1015 Chemical 15 Litre Superior Clip Close 15 Litres Per Kit 1 Product Code Type Product Absorbency Quantity 14-1025 Maintenance 25 Litre Superior Clip Close 25 Litres Per Kit 1 24-1025 Oil-Only 25 Litre Superior Clip Close 25 Litres Per Kit 1 04-1025 Chemical 25 Litre Superior Clip Close 25 Litres Per Kit 1 Pads 10 Socks 1 Bags & Ties 1 15 LTR CONTENTS Pads 20 Socks 2 Bags & Ties 2 25 LTR CONTENTS 15 LITRES 25 LITRES 14-1025 24-1025 04-1025

54. 49 TECH FEATURES > Plain lightweight meltblown for maximum capacity ........................................................................................................... > Completely hydrophobic - only absorbs oil ........................................................................................................... > Floats on water even when saturated with oil ........................................................................................................... ‘CLASSIC 2000’ PLAIN OIL-ONLY PAD TECH FEATURES > Heavyweight dimpled meltblown polypropylene ........................................................................................................... > Perforated for increased productivity ........................................................................................................... > Extra loft for better oil retention ........................................................................................................... ‘CLASSIC 3000’ DIMPLED OIL-ONLY PAD Product Code Product Absorbency Dimensions Quantity 59-7000 (21-1001 * ) ‘Classic 2000’ Oil-Only Plain Pad 0.6 Litres Per Pad 50cm x 40cm 200 57-7000 (21-1049 * ) ‘Classic 3000’ Oil-Only Plain Pad 1.1 Litres Per Pad 50cm x 40cm 100 59-7003 (21-1044 * ) ‘Classic 2000’ Oil-Only Dimpled Pad 0.6 Litres Per Pad 50cm x 40cm 200 57-7003 (21-1037 * ) ‘Classic 3000’ Oil-Only Dimpled Pad 1.1 Litres Per Pad 50cm x 40cm 100 * Denotes previously used product code 57-7003 59-7000

99. RENOWN SPILL CONTAINMENT TECH FEATURES > Compatible dispensing tray available - product code - 31-1355 ........................................................................................................... > Safe working load capacity - 2500Kg ........................................................................................................... > Suitable for most IBC footprints ........................................................................................................... DOUBLE IBC SPILL PALLET C/W WITH GRATING TECH FEATURES > New and improved roof structure design ........................................................................................................... > Safe working load capacity - 2500Kg ........................................................................................................... > Integral base fork pockets for safe transportation of empty units ........................................................................................................... DOUBLE IBC ‘ALL WEATHER’ SPILL PALLET C/W WITH GRATING Product Code Product Capacity Dimensions (W x D x H) Quantity 31-1213 ‘Renown’ Polyethylene Single IBC Spill Pallet c/w Grating 1100 Litres 1760 x 1350 x 710mm 1 31-1216 ‘Renown’ Polyethylene Double IBC Spill Pallet c/w Grating 1140 Litres 2560 x 1350 x 510mm 1 31-1343 ‘Renown’ Polyethylene ‘All Weather’ Single IBC Spill Pallet c/w Grating 1100 Litres 1760 x 1350 x 2410mm 1 31-1344 ‘Renown’ Polyethylene ‘All Weather’ Double IBC Spill Pallet c/w Grating 1140 Litres 2560 x 1350 x 2210mm 1 31-1355 ‘Renown’ Polyethylene dispensing tray for Double IBC Spill Pallet 86 Litres 530 x 510 x 560mm 1 31-1216 31-1355

71. HOLDALL There are many other sizes of spill kits available from 10 litres to 1000 litres, please ask for further information. SUPERIOR SPILL KITS Product Code Type Product Absorbency Quantity 14-1031 Maintenance 30 Litre Superior Vinyl Holdall 30 Litres Per Kit 1 24-1031 Oil-Only 30 Litre Superior Vinyl Holdall 30 Litres Per Kit 1 04-1031 Chemical 30 Litre Superior Vinyl Holdall 30 Litres Per Kit 1 Product Code Type Product Absorbency Quantity 14-1050 Maintenance 50 Litre Superior Vinyl Holdall 50 Litres Per Kit 1 24-1050 Oil-Only 50 Litre Superior Vinyl Holdall 50 Litres Per Kit 1 04-1050 Chemical 50 Litre Superior Vinyl Holdall 50 Litres Per Kit 1 30 LITRES 50 LITRES Pads 30 Socks 3 Pillows 3 Bags & Ties 5 50 LTR CONTENTS Pads 10 Socks 3 Pillows 3 Bags & Ties 3 30 LTR CONTENTS 14-1050 04-1050 24-1050

95. RENOWN SPILL CONTAINMENT TECH FEATURES > Recyclable structural grade polyethylene ........................................................................................................... > Suitable for storing single drums ........................................................................................................... POLYETHYLENE DRUM TRAY TECH FEATURES > Features a moulded lip to ensure safe operation ........................................................................................................... > Anti-slip ribbing on ramp surface ........................................................................................................... POLYETHYLENE WORKFLOOR RAMP TECH FEATURES > Designed to suit standard steel 205 litre drums ........................................................................................................... > Includes stainless steel debris filter ........................................................................................................... > Ideal for use on waste oil drums ........................................................................................................... DRUM FUNNEL 205 LITRE C/W HINGED LID Product Code Product Capacity Dimensions (W x D x H) Quantity 31-1253 ‘Renown’ 2-drum polyethylene Workfloor 150 Litres 1260 X 860 X 150mm 1 31-1254 ‘Renown’ 4-drum polyethylene Workfloor 300 Litres 1660 x 1260 x 150mm 1 31-1256 ‘Renown’ polyethylene Workfloor Ramp N/A 800 x 650 x 160mm 1 31-1357 ‘Renown’ polyethylene Drum Tray 50 Litres 870dia x 190mm 1 31-1267 ‘Renown’ polyethylene 205 litre Drum Funnel c/w hinged Lid N/A 610dia x 230mm 1 31-1267 31-1357 31-1256

66. There are many other sizes of spill kits available from 10 litres to 1000 litres, please ask for further information. *2/' 63,//.,76 61 Product Code Type Product Absorbency Quantity 18-1015 Maintenance 15 Litre ‘Black Gold’ Clip Close 15 Litres Per Kit 1 28-1015 Oil-Only 15 Litre ‘Black Gold’ Clip Close 15 Litres Per Kit 1 08-1015 Chemical 15 Litre ‘Black Gold’ Clip Close 15 Litres Per Kit 1 Pads 16 Socks 2 Bags & Ties 4 30 LTR CONTENTS 30 LITRES Pads 8 Socks 1 Bags & Ties 2 15 LTR CONTENTS 15 LITRES Product Code Type Product Absorbency Quantity 18-1030 Maintenance 30 Litre ‘Black Gold’ Clip Close 30 Litres Per Kit 1 28-1030 Oil-Only 30 Litre ‘Black Gold’ Clip Close 30 Litres Per Kit 1 08-1030 Chemical 30 Litre ‘Black Gold’ Clip Close 30 Litres Per Kit 1 18-1015 08-1015 28-1015 18-1030 08-1030 28-1030

57. CLASSIC ABSORBENTS TECH FEATURES > Fine fibre coverstock to provide smear free wiping ........................................................................................................... > Heavyweight & perforated for multiple applications ........................................................................................................... > Compatible with our Spill Depot storage system ........................................................................................................... ‘CLASSIC 3000’ DIMPLED CHEMICAL ROLL TECH FEATURES > Spun bond outer skin ........................................................................................................... > Soft and flexible so use when space is limited ........................................................................................................... > Perfect for soaking up contained spills ........................................................................................................... ‘CLASSIC’ CHEMICAL PILLOW Product Code Product Absorbency Dimensions Quantity 59-6000 (01-1082 * ) ‘Classic 2000’ Lightweight Chemical Pad 0.5 Litres Per Pad 50cm x 40cm 200 57-6001 (01-1002 * ) ‘Classic 3000’ Chemical Dimpled Roll 85 Litres Per Roll 38cm x 46m 1 57-6003 (01-1049 * ) ‘Classic 3000’ Heavyweight Chemical Pad 1 Litre Per Pad 50cm x 40cm 100 57-1005 (01-1004 * ) ‘Classic’ Chemical Boom 30 Litres Per Boom 13cm x 3m 4 57-6009 (01-1013 * ) ‘Classic’ Chemical Pillow 3.5 Litres Per Pillow 38cm x 23cm 16 * Denotes previously used product code 57-6009 57-6001

78. Close Clip 20 LITRES Holdall Vinyl 50 LITRES Drum Static 80 LITRES Pads 18 Socks 2 Bags & Ties 3 Contents: Pads 50 Socks 4 Bags & Ties 5 Contents: Pads 80 Socks 6 Bags & Ties 6 Contents: 73 Product Code Product Absorbency Quantity 17-1020 20 litre Black & White Maintenance Spill Response Kit 20 Litres Per Kit 1 27-1020 20 litre Black & White Oil-Only Spill Response Kit 20 Litres Per Kit 1 07-1020 20 litre Black & White Chemical Spill Response Kit 20 Litres Per Kit 1 Product Code Product Absorbency Quantity 17-1050 50 litre Black & White Maintenance Spill Response Kit 50 Litres Per Kit 1 27-1050 50 litre Black & White Oil-Only Spill Response Kit 50 Litres Per Kit 1 07-1050 50 litre Black & White Chemical Spill Response Kit 50 Litres Per Kit 1 Product Code Product Absorbency Quantity 17-1080 80 litre Black & White Maintenance Spill Response Kit 80 Litres Per Kit 1 27-1080 80 litre Black & White Oil-Only Spill Response Kit 80 Litres Per Kit 1 07-1080 80 litre Black & White Chemical Spill Response Kit 80 Litres Per Kit 1

120. 115 > Lightweight for easy handling ................................................................................................. > Fire Retardant & conforms to BS 476 pt 1 ................................................................................................. > Cellulose granules from sustainable sources ................................................................................................. INDUSTRIAL XR70 INDOOR GRANULES TECH FEATURES > High crush resistance ................................................................................................. > Chemically inert ................................................................................................. > Suitable for industrial yard areas ................................................................................................. INDUSTRIAL XR60 OUTDOOR GRANULES TECH FEATURES CLAY GRANULES Product Code Product Bag Size Absorbency Quantity 11-1013 XR70 Lubetech Industrial Cellulose Granules 30 Litres 12 Litres Per Bag 70 Per Pallet 11-1113 XR70 Lubetech Industrial Cellulose Granules 30 Litres 12 Litres Per Bag 1 11-1014 XR60 Lubetech ‘Industrial’ Clay Granules 20 Litres 10 Litres Per Bag 70 Per Pallet 11-1114 XR60 Lubetech ‘Industrial’ Clay Granules 20 Litres 10 Litres Per Bag 1 11-1085 XR85 Lubetech ‘Construction’ Clay Granules 20 Litres 12 Litres Per Bag 70 Per Pallet 11-1185 XR85 Lubetech ‘Construction’ Clay Granules 20 Litres 12 Litres Per Bag 1 11-1070 XR99 Lubetech ‘Highway’ Micro Clay Granules 20 Litres 14 Litres Per Bag 70 Per Pallet 11-1170 XR99 Lubetech ‘Highway’ Micro Clay Granules 20 Litres 14 Litres Per Bag 1 11-1013 11-1014

52. 47 TECH FEATURES > Heavyweight dimpled meltblown polypropylene ........................................................................................................... > No perforations, suitable for marine applications ........................................................................................................... > Rapid absorption through open fibre construction ........................................................................................................... ‘CLASSIC 3000’ DIMPLED OIL-ONLY ROLL Product Code Product Absorbency Dimensions Quantity 57-7001 (21-1031 * ) ‘Classic 3000’ Oil-Only Dimpled Roll 115 Litres Per Roll 48cm x 44m 1 57-7002 (21-1030 * ) ‘Classic 3000’ Oil-Only Dimpled Roll 230 Litres Per Roll 96cm x 44m 1 57-7009 (21-1018 * ) ‘Classic’ Oil-Only Pillow 3.5 Litres Per Pillow 38cm x 23cm 16 57-3005 (21-1009 * ) ‘Classic’ Oil-Only Marine Boom 30 Litres Per Boom 13cm x 3m 4 57-3008 (21-1008 * ) ‘Classic’ Oil-Only Marine Boom 80 Litres Per Boom 20cm x 3m 4 57-3045 (22-1039 * ) ‘Classic’ Oil-Only Spaghetti Marine Boom 30 Litres Per Boom 13cm x 3m 4 57-3048 (22-1038 * ) ‘Classic’ Oil-Only Spaghetti Marine Boom 80 Litres Per Boom 20cm x 3m 4 * Denotes previously used product code 57-7002 57-3008 TECH FEATURES > Nylon outer net and spunbond inner skin for maximum oil retention - floats on water ........................................................................................................... > Suitable for deploying in open seas ........................................................................................................... > Fitted with special clips to form a continuous boom ........................................................................................................... ‘CLASSIC’ OIL-ONLY MARINE BOOM

74. MOBILE 2 WHEELED BIN 69 Product Code Type Product Absorbency Quantity 14-1120 Maintenance 120 Litre Superior Mobile 2 Wheeled Bin 120 Litres Per Kit 1 24-1120 Oil-Only 120 Litre Superior Mobile 2 Wheeled Bin 120 Litres Per Kit 1 04-1120 Chemical 120 Litre Superior Mobile 2 Wheeled Bin 120 Litres Per Kit 1 Product Code Type Product Absorbency Quantity 14-1240 Maintenance 240 Litre Superior Mobile 2 Wheeled Bin 240 Litres Per Kit 1 24-1240 Oil-Only 240 Litre Superior Mobile 2 Wheeled Bin 240 Litres Per Kit 1 04-1240 Chemical 240 Litre Superior Mobile 2 Wheeled Bin 240 Litres Per Kit 1 Product Code Type Product Absorbency Quantity 14-1360 Maintenance 360 Litre Superior Mobile 2 Wheeled Bin 360 Litres Per Kit 1 24-1360 Oil-Only 360 Litre Superior Mobile 2 Wheeled Bin 360 Litres Per Kit 1 04-1360 Chemical 360 Litre Superior Mobile 2 Wheeled Bin 360 Litres Per Kit 1 CONTENTS CONTENTS CONTENTS PADS X 60 - SOCKS X 4 - PILLOWS X 4 - BAGS & TIES X 10 PADS X 150 - SOCKS X 6 - PILLOWS X 10 - FLOOR SIGN X 1 HAZARD TAPE X 1 - BAGS & TIES X 18 PADS X 190 - SOCKS (1.2 m ) X 8 - SOCKS (3 m ) X 4 - PILLOWS X 16 FLOOR SIGN X 1 - HAZARD TAPE X 1 - BAGS & TIES X 24 12 0 LITRES 240 LITRES 360 LITRES 14-1240 04-1240 24-1240

117. DRAIN PROTECTION > Designed for single use ............................................................................................... > Extremely malleable to form a tight seal even on uneven surface ............................................................................................... > Chemically inert, providing maximum chemical resistance ............................................................................................... BENTONITE CLAY DRAIN MAT - AVAILABLE IN TWO SIZES TECH FEATURES > Dual hardness laminated polyurethane construction ............................................................................................... > Compatible with oils, fuels, solvents and most chemicals ............................................................................................... > Perfect solution for when a quick response is required ............................................................................................... POLYURETHANE DRAIN COVER - AVAILABLE IN THREE SIZES TECH FEATURES > Neoprene seal to form an effective oil resistant barrier ............................................................................................... > Straight forward single lever locking operation ............................................................................................... > Useful for deploying during routine operations, such as tanker deliveries ............................................................................................... MECHANICAL DRAIN COVER - AVAILABLE IN TWO SIZES TECH FEATURES Product Code Product Dimensions Quantity 31-1031 Polyurethane Drain Cover 46cm x 46cm 1 31-1048 Polyurethane Drain Cover 61cm x 61cm 1 31-1000 Polyurethane Drain Cover 91cm x 91cm 1 34-1061 Printed Vinyl Holdall for Drain Covers 15.5cm Dia x 100cm 1 34-1062 Printed Vinyl Holdall for Drain Covers 15.5cm Dia x 70cm 1 31-1005 Bentonite Clay Drain Mat 45cm x 45cm 2 31-1003 Bentonite Clay Drain Mat 65cm x 45cm 2 31-1037 Mechanical Drain Cover 56cm x 50cm 1 31-1038 Mechanical Drain Cover 43cm x 36cm 1 31-1048 31-1037 31-1003

50. 45 TECH FEATURES > Spun bond outer skin ........................................................................................................... > Absorbs more than 4.5 litres of fluid ........................................................................................................... > Can be used to absorb spills in tight spaces ........................................................................................................... ‘CLASSIC’ MAINTENANCE PILLOW TECH FEATURES > Heavyweight with double sided coverstock ........................................................................................................... > Available in two roll sizes ........................................................................................................... > Multiple perforations for improved productivity ........................................................................................................... ‘CLASSIC’ 3000 DOUBLE SIDED MAINTENANCE ROLLS TECH FEATURES > Anti-slip polythene backing for use on walk ways ........................................................................................................... > Strong needle punched polypropylene construction ........................................................................................................... > Suitable for driving over with fork lift trucks ........................................................................................................... ‘ANTI SLIP’ POLY BACKED INDUSTRIAL RUG Product Code Product Absorbency Dimensions Quantity 57-2000 (12-1004 * ) ‘Classic’ Maintenance Sock 4 Litres Per Sock 7.5cm x 1.2m 20 57-5001 (11-1003 * ) ‘Classic 3000’ Maintenance Double Sided Roll 70 Litres Per Roll 38cm x 46m 1 57-5002 (11-1002 * ) ‘Classic 3000’ Maintenance Double Sided Roll 140 Litres Per Roll 76cm x 46m 1 57-5004 (12-1019 * ) ‘Classic 3000’ Maintenance Dimpled Roll n’Box 44 Litres Per Roll 38cm x 22m 1 57-5009 (11-1028 * ) ‘Classic’ Maintenance Pillow 4.5 Litres Per Pillow 38cm x 23cm 16 57-5040 (11-1012 * ) ‘Anti-slip’ poly backed ‘Industrial Rug’ 140 Litres Per Rug 92cm x 46m 1 * Denotes previously used product code 57-5040 57-5002 57-5001 57-5009

111. ANCILLARIES TECH FEATURES > Fully sealed units for full protection against accidental spills ............................................................................................... > Colour coded oil transfer management system ............................................................................................... > Designed to prevent oil contamination ............................................................................................... > Individual lid designs available in ten colour options ............................................................................................... OIL SAFE DISPENSERS Product Code Product Quantity 15-1015 Single Drum Clamp 1 15-1090 Cast Iron Rotary Pump - 205 Litre Drum 1 15-1200 Oil Safe 2 Litre Drum 1 15-1201 Oil Safe 3 Litre Drum 1 15-1202 Oil Safe 5 Litre Drum 1 15-1203 Oil Safe 10 Litre Drum 1 Product Code Product Quantity 15-1205 Oil Safe Storage Lid - Yellow 1 15-1207 Oil Safe Utility Lid - Red 1 15-1215 Oil Safe Stretch Spout Lid - Green 1 15-1216 Oil Safe Pump 1 15-1420 Oil Safe Stumpy Spout Lid - Blue 1 34-1022 ‘Danger Hazardous Spill’ Floor Sign - 60 x 45cm 1 STORAGE LID: ......................... 15-1205 2 LITRE DRUM: ......................... 15-1200 STRETCH SPOUT LID: ......................... 15-1215 3 LITRE DRUM: ......................... 15-1201 STUMPY SPOUT LID: ..................... 15-1420 5 LITRE DRUM: ..................... 15-1202 UTILITY LID & PUMP: ......................... 15-1207 10 LITRE DRUM: .......................... 15-1203

124. 119 Code Range Type Usage Pg 31-1386 Renown Drum Cupboard Spill Containment 86 31-3002 Prestige Spill Platform Spill Containment 80 31-3003 Prestige Spill Platform Spill Containment 80 31-3004 Prestige Ramp Spill Containment 80 31-3022 Prestige Spill Pallet Spill Containment 80 31-3024 Prestige Spill Pallet Spill Containment 80 31-3025 Prestige Covered Pallet Spill Containment 81 31-3026 Prestige Covered Pallet Spill Containment 81 31-3036 Prestige Base Unit Spill Containment 81 31-3037 Prestige Stacking Unit Spill Containment 81 31-3060 Prestige Drum Transporter Spill Containment 81 31-3070 Prestige IBC Spill Pallet Spill Containment 83 31-3072 Prestige Dispensing Tray Spill Containment 83 31-3073 Prestige IBC Spill Pallet Spill Containment 83 31-3074 Prestige Dispensing Tray Spill Containment 83 31-3075 Prestige IBC Spill Pallet Spill Containment 83 31-3080 Prestige Spill Tray Spill Containment 85 31-3081 Prestige Spill Tray Spill Containment 85 31-3082 Prestige Spill Tray Spill Containment 85 31-3083 Prestige Spill Tray Spill Containment 85 31-3084 Prestige Spill Tray Spill Containment 85 31-3085 Prestige Spill Tray Spill Containment 85 31-3086 Prestige Spill Tray Spill Containment 85 31-3087 Prestige Spill Tray Spill Containment 85 31-3088 Prestige Spill Tray Spill Containment 85 31-3089 Prestige Spill Tray Spill Containment 85 34-1007 Ancillaries 2-wheeled Bin Kit Component 108 34-1008 Ancillaries 2-wheeled Bin Kit Component 108 34-1009 Ancillaries 2-wheeled Bin Kit Component 108 34-1010 Ancillaries 4-wheeled Bin Kit Component 108 34-1011 Ancillaries 4-wheeled Bin Kit Component 108 34-1016 Ancillaries Wall Sign Kit Component 108 34-1022 Ancillaries Floor Sign Kit Component 106 34-1052 Ancillaries 4-wheeled Bin Kit Component 108 Code Range Type Usage Pg 34-1053 Ancillaries 4-wheeled Bin Kit Component 108 34-1061 Drain Protection Vinyl Holdall Wall Mountable 111 34-1062 Drain Protection Vinyl Holdall Wall Mountable 111 57-1005 Classic Boom Chemical 52 57-2000 Classic Sock Maintenance 45 57-3005 Classic Boom Oil-Only 47 57-3008 Classic Boom Oil-Only 47 57-3045 Classic Boom Oil-Only 47 57-3048 Classic Boom Oil-Only 47 57-5000 Classic Pads Maintenance 43 57-5001 Classic Roll Maintenance 45 57-5002 Classic Roll Maintenance 45 57-5003 Classic Pads Maintenance 43 57-5004 Classic Roll n’ box Maintenance 45 57-5009 Classic Pillow Maintenance 45 57-5040 Classic Rug Maintenance 45 57-6001 Classic Roll Chemical 52 57-6003 Classic Pads Chemical 52 57-6009 Classic Pillow Chemical 52 57-7000 Classic Pads Oil-Only 49 57-7001 Classic Roll Oil-Only 47 57-7002 Classic Roll Oil-Only 47 57-7003 Classic Pads Oil-Only 49 57-7009 Classic Pillow Oil-Only 47 59-5000 Classic Pads Maintenance 43 59-5003 Classic Pads Maintenance 43 59-6000 Classic Pads Chemical 52 59-7000 Classic Pads Oil-Only 49 59-7003 Classic Pads Oil-Only 49 69-1000 Gold Sock Chemical 10 69-2000 Gold Sock Maintenance 6 69-3000 Gold Sock Oil-Only 8 69-5000 Gold Pads Maintenance 6 69-5001 Gold Roll Maintenance 6

123. INDEX Code Range Type Usage Pg 18-1030 Gold Spill Kit Maintenance 61 18-1050 Gold Spill Kit Maintenance 62 19-1050 Natural Spill Kit Maintenance 14 19-1120 Natural Spill Kit Maintenance 14 21-1001 * Classic Pad Oil-Only 49 21-1008 * Classic Boom Oil-Only 47 21-1009 * Classic Boom Oil-Only 47 21-1018 * Classic Pillow Oil-Only 47 21-1030 * Classic Roll Oil-Only 47 21-1031 * Classic Roll Oil-Only 47 21-1037 * Classic Pad Oil-Only 49 21-1044 * Classic Pad Oil-Only 49 21-1049 * Classic Pad Oil-Only 49 22-1038 * Classic Boom Oil-Only 47 22-1039 * Classic Boom Oil-Only 47 24-1015 Superior Spill Kit Oil-Only 65 24-1025 Superior Spill Kit Oil-Only 65 24-1031 Superior Spill Kit Oil-Only 66 24-1050 Superior Spill Kit Oil-Only 66 24-1080 Superior Spill Kit Oil-Only 67 24-1105 Superior Spill Kit Oil-Only 70 24-1120 Superior Spill Kit Oil-Only 69 24-1125 Superior Spill Kit Oil-Only 68 24-1240 Superior Spill Kit Oil-Only 69 24-1245 Superior Spill Kit Oil-Only 68 24-1360 Superior Spill Kit Oil-Only 69 24-1755 Superior Spill Kit Oil-Only 70 27-1020 Black & White Spill Kit Oil-Only 73 27-1050 Black & White Spill Kit Oil-Only 73 27-1080 Black & White Spill Kit Oil-Only 73 27-1120 Black & White Spill Kit Oil-Only 74 27-1240 Black & White Spill Kit Oil-Only 74 28-1015 Gold Spill Kit Oil-Only 61 28-1030 Gold Spill Kit Oil-Only 61 Code Range Type Usage Pg 28-1050 Gold Spill Kit Oil-Only 62 29-1050 Natural Spill Kit Oil-Only 16 29-1120 Natural Spill Kit Oil-Only 16 31-1000 Drain Protection Drain Cover Polyurethane 111 31-1003 Drain Protection Clay Drain Mat Clay 111 31-1005 Drain Protection Clay Drain Mat Clay 111 31-1031 Drain Protection Drain Cover Polyurethane 111 31-1037 Drain Protection Drain Cover Mechanical 111 31-1038 Drain Protection Drain Cover Mechanical 111 31-1048 Drain Protection Drain Cover Polyurethane 111 31-1175 Steel Cabinets Cabinet Internal 102 31-1176 Steel Cabinets Cabinet Internal 102 31-1177 Steel Cabinets Cabinet Internal 102 31-1205 Steel Cabinets Storage Unit External 100 31-1213 Renown IBC Spill Pallet Spill Containment 94 31-1216 Renown IBC Spill Pallet Spill Containment 94 31-1242 Steel Cabinets Storage Unit External 100 31-1244 Renown Covered Pallet Spill Containment 92 31-1245 Renown Ramp Spill Containment 92 31-1253 Renown Workfloor Spill Containment 90 31-1254 Renown Workfloor Spill Containment 90 31-1256 Renown Ramp Spill Containment 90 31-1257 Renown Spill Pallet Spill Containment 92 31-1258 Renown Spill Pallet Spill Containment 92 31-1267 Renown Drum Funnel Spill Containment 90 31-1305 Steel Cabinets Storage Unit External 100 31-1343 Renown IBC Spill Pallet Spill Containment 94 31-1344 Renown IBC Spill Pallet Spill Containment 94 31-1355 Renown Tray Spill Containment 94 31-1357 Renown Drum Tray Spill Containment 90 31-1382 Renown Drum Cupboard Spill Containment 86 31-1383 Renown Drum Cupboard Spill Containment 86 31-1384 Renown Drum Cupboard Spill Containment 86 31-1385 Renown Drum Cupboard Spill Containment 86 * 2010 Product Code

122. 117 * 2010 Product Code Code Range Type Usage Pg 01-1002 * Classic Roll Chemical 52 01-1004 * Classic Boom Chemical 52 01-1013 * Classic Pillow Chemical 52 01-1049 * Classic Pad Chemical 52 01-1082 * Classic Pad Chemical 52 04-1015 Superior Spill Kit Chemical 65 04-1025 Superior Spill Kit Chemical 65 04-1031 Superior Spill Kit Chemical 66 04-1050 Superior Spill Kit Chemical 66 04-1080 Superior Spill Kit Chemical 67 04-1105 Superior Spill Kit Chemical 70 04-1120 Superior Spill Kit Chemical 69 04-1240 Superior Spill Kit Chemical 69 04-1360 Superior Spill Kit Chemical 69 07-1020 Black & White Spill Kit Chemical 73 07-1050 Black & White Spill Kit Chemical 73 07-1080 Black & White Spill Kit Chemical 73 07-1120 Black & White Spill Kit Chemical 74 07-1240 Black & White Spill Kit Chemical 74 08-1015 Gold Spill Kit Chemical 61 08-1030 Gold Spill Kit Chemical 61 08-1050 Gold Spill Kit Chemical 62 11-1000 * Classic Pad Maintenance 43 11-1002 * Classic Roll Maintenance 45 11-1003 * Classic Roll Maintenance 45 11-1012 * Classic Rug Maintenance 45 11-1013 Granules Indoor Maintenance 115 11-1014 Granules Outdoor Maintenance 115 11-1028 * Classic Pillow Maintenance 45 11-1070 Granules Outdoor Maintenance 115 11-1085 Granules Outdoor Maintenance 115 11-1113 Granules Indoor Maintenance 115 11-1114 Granules Outdoor Maintenance 115 11-1170 Granules Outdoor Maintenance 115 Code Range Type Usage Pg 11-1185 Granules Outdoor Maintenance 115 12-1001 * Classic Pad Maintenance 43 12-1004 * Classic Sock Maintenance 45 12-1019 * Classic Roll n’box Maintenance 45 12-1052 * Classic Pad Maintenance 43 12-1082 * Classic Pad Maintenance 43 14-1015 Superior Spill Kit Maintenance 65 14-1025 Superior Spill Kit Maintenance 65 14-1031 Superior Spill Kit Maintenance 66 14-1050 Superior Spill Kit Maintenance 66 14-1080 Superior Spill Kit Maintenance 67 14-1105 Superior Spill Kit Maintenance 70 14-1120 Superior Spill Kit Maintenance 69 14-1125 Superior Spill Kit Maintenance 68 14-1240 Superior Spill Kit Maintenance 69 14-1245 Superior Spill Kit Maintenance 68 14-1360 Superior Spill Kit Maintenance 69 15-1015 Ancillaries Clamp Forklift 106 15-1090 Ancillaries Pump 205 ltr drum 106 15-1200 Ancillaries 2 ltr Drum Oil Safe 106 15-1201 Ancillaries 3 ltr Drum Oil Safe 106 15-1202 Ancillaries 5 ltr Drum Oil Safe 106 15-1203 Ancillaries 10 ltr Drum Oil Safe 106 15-1205 Ancillaries Storage Lid Oil Safe 106 15-1207 Ancillaries Utility Lid Oil Safe 106 15-1215 Ancillaries Spout Lid Oil Safe 106 15-1216 Ancillaries Pump Oil Safe 106 15-1420 Ancillaries Spout Lid Oil Safe 106 17-1020 Black & White Spill Kit Maintenance 73 17-1050 Black & White Spill Kit Maintenance 73 17-1080 Black & White Spill Kit Maintenance 73 17-1120 Black & White Spill Kit Maintenance 74 17-1240 Black & White Spill Kit Maintenance 74 18-1015 Gold Spill Kit Maintenance 61

125. INDEX Code Range Type Usage Pg 69-6000 Gold Pads Chemical 10 69-6001 Gold Roll Chemical 10 69-7000 Gold Pads Oil-Only 8 69-7001 Gold Roll Oil-Only 8 75-1000 Superior Sock Chemical 24 75-1001 Superior Sock Chemical 24 75-2000 Superior Sock Maintenance 20 75-2001 Superior Sock Maintenance 20 75-3000 Superior Sock Oil-Only 22 75-3001 Superior Sock Oil-Only 22 75-5000 Superior Pads Maintenance 20 75-5001 Superior Roll Maintenance 20 75-6000 Superior Pads Chemical 24 75-6001 Superior Roll Chemical 24 75-7000 Superior Pads Oil-Only 22 75-7001 Superior Roll Oil-Only 22 77-1000 Black & White Sock Chemical 40 77-2000 Black & White Sock Maintenance 36 77-3000 Black & White Sock Oil-Only 38 77-5000 Black & White Pads Maintenance 36 77-5001 Black & White Roll Maintenance 36 77-5002 Black & White Roll Maintenance 36 77-6000 Black & White Pad Chemical 40 77-6001 Black & White Roll Chemical 40 77-6002 Black & White Roll Chemical 40 77-7000 Black & White Pads Oil-Only 38 77-7001 Black & White Roll Oil-Only 38 77-7002 Black & White Roll Oil-Only 38 87-5000 Tough n’Soft Pads Maintenance 27 87-5001 Tough n’Soft Roll Maintenance 27 87-5003 Tough n’Soft Roll n' box Maintenance 27 87-6000 Tough n’Soft Pads Chemical 32 87-6001 Tough n’Soft Roll Chemical 32 87-6003 Tough n’Soft Roll n' box Chemical 32 Code Range Type Usage Pg 87-7000 Tough n’Soft Pads Oil-Only 30 87-7001 Tough n’Soft Roll Oil-Only 30 87-7003 Tough n’Soft Roll n' box Oil-Only 30 87-7005 Tough n’Soft Drum Cover Oil-Only 30 99-5000 Natural Pads Maintenance 13 99-5001 Natural Roll Maintenance 13 99-7000 Natural Pads Oil-Only 15 99-7001 Natural Roll Oil-Only 15 DEPOT-1 Spill Depot Dispenser Single 55 DEPOT-2 Spill Depot Dispenser Two part 55 DEPOT-4 Spill Depot Dispenser Two part 55 DEPOT-5 Spill Depot Dispenser Three part 55 Code Range Type Usage Pg 34-1053 Ancillaries 4-wheeled Bin Kit Component 108 34-1061 Drain Protection Vinyl Holdall Wall Mountable 111 34-1062 Drain Protection Vinyl Holdall Wall Mountable 111 57-1005 Classic Boom Chemical 52 57-2000 Classic Sock Maintenance 45 57-3005 Classic Boom Oil-Only 47 57-3008 Classic Boom Oil-Only 47 57-3045 Classic Boom Oil-Only 47 57-3048 Classic Boom Oil-Only 47 57-5000 Classic Pads Maintenance 43 57-5001 Classic Roll Maintenance 45 57-5002 Classic Roll Maintenance 45 57-5003 Classic Pads Maintenance 43 57-5004 Classic Roll n’ box Maintenance 45 57-5009 Classic Pillow Maintenance 45 57-5040 Classic Rug Maintenance 45 57-6001 Classic Roll Chemical 52 57-6003 Classic Pads Chemical 52 57-6009 Classic Pillow Chemical 52 57-7000 Classic Pads Oil-Only 49 57-7001 Classic Roll Oil-Only 47 57-7002 Classic Roll Oil-Only 47 57-7003 Classic Pads Oil-Only 49 57-7009 Classic Pillow Oil-Only 47 59-5000 Classic Pads Maintenance 43 59-5003 Classic Pads Maintenance 43 59-6000 Classic Pads Chemical 52 59-7000 Classic Pads Oil-Only 49 59-7003 Classic Pads Oil-Only 49 69-1000 Gold Sock Chemical 10 69-2000 Gold Sock Maintenance 6 69-3000 Gold Sock Oil-Only 8 69-5000 Gold Pads Maintenance 6 69-5001 Gold Roll Maintenance 6