VAP - VECTACO EVO - Product Data Sheet - Freestanding Guardrail - EN-ISO14122-3

1. ALSOLU - 89 rue Florent Evrard, 42100 Saint-Etienne - FRANCE Tél : +33 (0)4 77 47 45 00 - Fax : +33 (0)4 77 47 45 01 - Mail : devis@alsolu.com - Site web : www.alsolu.com 01102020 PRODUCT DATA SHEET VECTACO ® > COLLECTIVE PROTECTION – GUARDRAILS > FREESTANDING GUARDRAIL Ref.: VAP FREESTANDING GUARDRAIL freestanding guardrail VECTACO ® USE The freestanding guardrail VECTACO ® secures roof terraces when it is technically impossible to fix on the parapet or on the concrete slab. It avoids any drilling the roof membrane and thus preserves the watertightness. Plastic counterweight 12,5 kg NEW Upright/handrail connection system: the triangular handrail and T part are substituted by a round handrail and a plug at the top of the upright (delivered unassembled). This change leads to the following product modifications: - New corner angles (plastic and ALU) for round handrail; - New plug for round handrail; - Uprights: notch at the top to receive the handrail + pre-drilled holes to facilitate the assembly of the handrail and knee-rail. REFERENCES Straight upright 25° inclined upright (others inclinations on request) 45°Curved upright Folding upright Handrail + middle rail VAP-D2 VAP-I2 VAP-C2 VAP-R2 Handrail +middle rail + toe - board VAP-D3 VAP-I3 VAP-C3 VAP-R3 > Economical > Simple and quick assembly: - T parts pre-assembled on uprights - Bases welded to support legs > Simplified handling: - Ballast counterweight divided into 2 pads of 12.5 kg equipped with ergonomic handles - Handrail and knee rail of 3 m length delivered in bundles of 7 units - Available in stock, short lead time ADVANTAGES NEW EVOLUTION PRODUCT STANDARD EN ISO 14122-3

3. C A B 2 3 D E F G 1 1 1 1 2 2 ALSOLU - 89 rue Florent Evrard, 42100 Saint-Etienne - FRANCE Tél : +33 (0)4 77 47 45 00 - Fax : +33 (0)4 77 47 45 01 - Mail : devis@alsolu.com - Site web : www.alsolu.com 01102020 PRODUCT DATA SHEET VECTACO ® > COLLECTIVE PROTECTION – GUARDRAILS > FREESTANDING GUARDRAIL Ref.: VAP FREESTANDING GUARDRAIL TH stainless steel perfix 4.8 x 16 self-drilling screw TH stainless steel perfix 4.8 x 25 self-drilling screw TH stainless steel perfix 4.8 x 50 self-drilling screw 1 2 3 Installation schema of the VECTACO ® inclined guardrail Key : A - Handrail corner angle Ø45 mm (Ref.: 23998) B - Middle rail angle Ø 35 mm (Ref.: 08685) C - Plastic counterweight 12.5 kg (Ref.: 03468) D - Toeboard plug 150 mm H (Ref.: 08738) E - Toeboard straight connector 150 mm H (Ref.: 08637) F - Toeboard angle kit 150 mm H (Ref.: 08869) G - Toeboard bracket 150 mm H for freestanding guardrail (Ref.: 08703) ASSEMBLY RECOMMENDATIONS ( cf. instructions) - Maximum inter-axial between uprights: 1500 mm - Assembly through HC and self-drilling screws - Parapet or stop end obligatory for each installation of the freestanding guardrail - Obligatory toeboard if the parapet ≤ 100 mm - Maximum slope of 15°/27° (for any other configuration, ask our research department) RECOMMENDED USE OPTIONS Safety gate 580 mm H kit for straight or inclined freestan - ding guardrail We have developed 2 safety door kits which adapt the straight and inclined uprights. The safety door remote-controlled closing ensures the safety of its user. Safety door kit 580 mm H for straight freestanding guardrail Safety door kit 580 mm H for incli - ned freestanding guardrail - Before any use, please refer to the technical notices, supplied at delivery and available on request. - For the storage of aluminum products, it is important to store packed packages under cover and in a dry place. - During the installation of folding guardrails, a lifeline VECTALINE ® is obligatory to secure the installers. - Do not use the counterweight handles for hoisting on roof.

2. 490 mm 626 mm 1316 mm 1180 mm 1316 mm 1100 mm 540 mm 500 mm 626 mm 1316 mm 1100 mm 474 mm 323 mm 840 mm 1316 mm 626 mm 1100 mm 542 mm 500 mm 626 mm ALSOLU - 89 rue Florent Evrard, 42100 Saint-Etienne - FRANCE Tél : +33 (0)4 77 47 45 00 - Fax : +33 (0)4 77 47 45 01 - Mail : devis@alsolu.com - Site web : www.alsolu.com 01102020 PRODUCT DATA SHEET VECTACO ® > COLLECTIVE PROTECTION – GUARDRAILS > FREESTANDING GUARDRAIL Ref.: VAP FREESTANDING GUARDRAIL Page2 CARATTERISTICHE TECNICHE 2 MODELS OF SELF-SUPPORTING BASES - Material: aluminum - Material finishes: raw, anodized or powder coated on request (ral colors) - Round handrail Ø 45 mm and round middle rail Ø 35 mm - Available with upright: straight, inclined, curved and folfing - Standards: European standard EN ISO 14122-3 of December 2007 UNIQUE COUNTERWEIGHTS ON THE MARKET > Self-supporting base with protective plastic clipped sole and mechanically welded support leg (Ref.: 04763) for freestanding guardrail in straight; curved and folding versions > 25° Self-supporting base with protective plastic clipped sole and mechanically welded support leg (Ref.: 08631) for inclined freestanding guardrail Attachment of the base to the upright made by a bloc - king wedge (Ref.: 04773) > A unique counterweight, with reduced mass of 12.5 Kg. Easy to grip, ergonomic and taking care of the spine of the installer > The load has been halved and two carrying handles simplify the lifting and the use. The centre of gravity is as closely as possible from the installer’s body, using a handy control. VECTACO ® counterweight has been scored at 2 out of 4 on the risk scale CARSAT*. *Pension insurance institution and health protection at work www.carsat-ra.fr DIMENSIONS Straight upright 25° inclined upright (others inclinations on request) Folding upright Curved upright