Product leaflet SR-510

1. Head Office Factory Tel: +46 10 484 87 00 Tel: +46 10 484 87 00 Visiting address: Visiting address: Stockholmsvägen 33 Västergatan 4 SE-181 33 Lidingö SE-341 50 Lagan www.srsafety.com The SR 510, P3 R* particle filter is designed for use in Sundström half masks, full face masks and the SR 500/ SR 500 EX/SR 700 fan. The filter provides protection against all types of particulate pollutants. The particle filter can easily be combined with gas filters from the Sundström filter range in order to provide protection also against gases and vapours, e.g. during spray painting. The particle filter should be combined with pre-filter SR 221, which will thereby extend the life of the particle filter. The SR 500/SR 500 EX fan should always be used with two particle filters or two combined filters consisting of gas filters and particle filters. *R (Re-useable): The filter is intended to be used for more than a single shift. Overview of particle filter Model Application SR 510 SR 90-3, SR 100, SR 200, SR 900. Fan SR 500/SR 500 EX/SR 700 SR 710 Fan SR 500/SR 500 EX/SR 700 See separate product leaflets. P02H-1318 Rev 10 20161108 A. Filter medium B. Hot-melt adhesive C. Marking label D. Filter case E Gasket Technical specification Product Model No. Ordering No. Particle filter P3 R SR 510 H02-1312 Product Description Product leaflet SR 510 EN 143:2000 EN 12941:1998 EN 12942:1998 Pressure drop at 30 l/min. ≈ 40 Pa ≤ 120 Pa - - Pressure drop at 95 l/min. ≈ 120 Pa ≤ 420 Pa - - Diameter/height 107/31 mm - - - Weight ≈ 44 g ≤ 300 g - - Service temperature -10 – +55 ºC, < 90 % RH - - - Storage temperature -20 – +40 ºC, < 90 % RH - - - Filtration efficiency, paraffin oil > 99.997 % ≥ 99.95 % ≥ 99.80 % ≥ 99.95 % Approvals EN 143:2000, EN 12941/12942:1998 A C B D E