Visual Tagging Solutions - Scafftag UK

1. Visual Tagging Solutions Immediate asset identification

56. © 2021 Brady Worldwide Inc. ALL RIGHTS RESERVED. Y4225581 Your distributor To help minimise our impact on the environment, Brady limits its number of reprints. Updated versions are always available for download on www.bradyeurope.com Search for: EUR-M-522-EN Our mission is to identify and protect people, products and places For more information or to learn more about our innovative products, visit www.scafftag.co.uk or call +44 (0)845 089 4060 *Y4225581I* 02/09/2021

52. Accessories 52 Worker ID Tag (ICE: In Case of Emergency) Worker Emergency ID Tag securely stores the workers critical and potentially lifesaving information, essential in the event of a accident or medical emergency. Order Reference Quantity WSID 01 Pack of 1 Worker Emergency ID Tag - No Window WSID 02 Pack of 1 Worker Emergency ID Tag - With Window • Adhesive strip attaches securely to exterior of the workers hard hat • 100% waterproof: can be used in extreme conditions • Helmet safe: will not weaken or damage the workers hard hat in any way • Weighs less than 5 grams • Security flap protects the workers information • Clear name window identifies the owner of the PPE, ideal when a number of workers are together and superior to the non-window option Universal Fit ID Universal Fit ID is suitable for all industries and all employees and contractors. Invaluable to first responders and/or paramedics in the event of an accident or medical emergency. The unique silicone ‘stretch-ring’ fitting system allows this product to be so flexible in how the system is used. It can be fitted to lanyards, key-rings, belts, fall restraints etc. It is ideal for use in non-helmet wearing industries / occupations or a perfect supplement to our Hard Hat ID products. Features a fully waterproof ID card and new gasket sealed lid design to keep your personal recorded information safe and secure against the elements. The Universal ID is very durable / tough and can withstand extremes of temperature (heat or cold). Order Reference Quantity WSID 05 1 Universal Fit ID Tag • Unique stretch-ring fitting system • Weather-proof design with lid gasket • Waterproof synthetic paper ID card • Impact resistant casing, shielded hinge • Supplied with spring loaded key-ring hook • Strong ‘Emergency Response’ lid graphic

5. Personalisation 5 www.scafftag.co.uk Personalise your Visual Tagging Solution Scafftag’s personalisation service allows you to add your company logo to our range of standard visual tags, while the design of the tagging system remains unchanged. Add your logo to: • Our standard inserts - most of our inserts are designed with a white band ready to accommodate your branding • To the holder - Typically printed at the top of the holders main body • The upper curve of the holders hang loop where applicable. Logo printed on holder hang loop Logo printed at the top of holder body Logo printed on white strip at head of insert How Do you Get your Artwork Personalised? A logo needs to be supplied in the correct file format and suitable quality for artwork personalisation. Ideally all logos will be supplied in vector format and any colours e.g. Pantone references, need to be specified. Colour Information When sending your artwork files, you will also need to supply the correct colour information for your product. Please indicate the PMS (Pantone Matching System) colour required, but if in doubt this can be discussed with our artwork department beforehand. Image Resolution We require high quality black and white line artwork, printed at a minimum of 300 dpi, must be 100% of the actual imprint size. Artwork must have crisp, sharp edges and needs no further touch up. Some thin lines, small copy and reverses may not reproduce as submitted and may need to be altered to print clearly. PLEASE DO NOT SUPPLY EITHER SCANNED OR IMAGES WHICH HAVE BEEN PLACED IN OTHER DOCUMENTS SUCH AS WORD, POWERPOINT ETC. General Information Reduce the file size if possible, particularly if you plan to send the artwork by e-mail. Use one of the following programs to compress your file: WinZip, 7-Zip. Using compression software is essential when e-mailing vector graphics (AI, EPS, CDR). WE REQUIRE ALL VECTOR GRAPHICS/PHOTOSHOP DOCUMENTS TO BE SAVED IN ADOBE CREATIVE SUITE VERSION 3 (CS3) FORMAT. ALL CORELDRAW DOCUMENTS NEED TO BE SAVED AS SINGLE PAGES. ALL EPS FILES NEED TO BE SAVED IN AN EDITABLE FORMAT.

35. Working at Height 35 www.scafftag.co.uk Ladder Management - Yellow Book The Yellow Book is the essential accessory for managing the maintenance of your ladder safety on site. Containing: Order Reference Quantity The Yellow Book & Ladder Register LIY BOXED The Yellow Book complete LIY 1 Inspection Report - replacement LIY 2 Notification of Faults Report - replacement LIY 7 100 Ladder Register • Legislative guidance • Sample risk assessment • Ladder Register (for fixed, mobile, step and pole) • Written inspection reports • Fault notification report. A complete safety inspection kit for ladders to provide a convenient and complete solution by including all you need to manage your ladders in one simple kit! Order Reference Quantity LAD-LADDERKIT3 1 The Yellow Book, 3 Adhesive Pads, 1 Pen, 3 Laddertag Holders, 3 Laddertag Inserts, 1 Pocket Memo, 1 Encapulated Ladder Guide Poster LAD-LADDERKIT6 1 The Yellow Book, 6 Adhesive Pads, 1 Pen, 6 Laddertag Holders, 6 Laddertag Inserts, 1 Pocket Memo, 1 Encapulated Ladder Guide Poster LAD-LADDERKIT10 1 The Yellow Book, 10 Adhesive Pads, 1 Pen, 10 Laddertag Holders, 10 Laddertag Inserts, 1 Pocket Memo, 1 Encapulated Ladder Guide Poster Ladder Inspection Kit Future-proof your Tagging Systems with RFID Technology RFID chips can be added to Laddertag on request and work in conjunction with SafeTrak (see page 54 ). Streamline your inspections, your management and your reporting with our effective and simple electronic management system. For information on future-proofing your Visual Tagging Solutions with RFID technology, contact your nearest customer services department. Email: customer.services@scafftag.com Thin nibbed permanent marker pens Ensure you have enough permanent marker pens to complete your inspections, when you need them. Pens supplied in boxes of 10 (Order Ref. STSM). Visit page 51 for more information.

53. Accessories 53 www.scafftag.co.uk Insert Clear Covers Clear covers provide extra protection and increase durability of tag inserts in environments that are prone to dirt, chemicals or sprayed matter. Clear covers provide additional UV protection for the written text on the inserts. Order Reference Quantity Height (mm) Width (mm) Diameter (mm) ENT-ETSI CLEAR 1 Entrytag Insert 193.00 144.00 - MIC-MTI CLEAR 1 Microtag Insert 47.00 30.00 - MUL-EITL CLEAR 1 Multitag Insert 164.00 50.00 - NAN-NAN CLEAR 1 Nanotag Insert 34.00 18.00 - SCAF-STSI CLEAR 1 Scafftag Insert 208.00 85.00 - UNI-UNI CLEAR 1 Unitag Insert - - 41.00 Blank Inserts Blank Inserts are to be used alongside tag holders for your inspection and maintenance needs to increase communication and safety in your workplace, perfect when operating a ‘colour safe’ system. Order Reference Quantity Height (mm) Width (mm) Diameter (mm) ENT-ETSI PLAIN 1 Entrytag Insert 193 144 - SCAF-STSI PLAIN 1 Scafftag Insert 208 85 - MUL-EITL PLAIN 1 Multitag Insert 164 50 - UNI-UNI PLAIN 1 Unitag Insert - - 41 MIC-MTI PLAIN 1 Microtag Insert 47 30 NAN-NAN PLAIN 1 Nanotag Insert 34 18 Entrytag Insert Scafftag Insert Multitag Insert Unitag Insert Microtag Insert Nanotag Insert Insert colours available: Blue Green Red White Yellow When ordering a blank insert please quote the Order Reference followed by the colour e.g. ENT-ETSI PLAIN BLUE Ordering information

4. Customisation 4 1 2 3 We can custom design Visual Tagging Solutions to help you manage virtually any issue and fit seamlessly with your business and systems. A wide range of customisation options are available including: • Tag size and shape • Data to be displayed/recorded • Visual design including logo, colours and fonts to reflect corporate branding • Adapt to site requirements e.g. metal strips for magnetic detection in food plants • Attachment methods e.g. cable tie, split ring, magnetic, adhesive A Library of Ideas We have thousands of designs developed for other clients offering unique solutions which may be of interest to your business. We do not charge any consultancy fees for working with you to develop your customised design. All you pay is a one off artwork set up charge with your first order. You can then reorder paying the price of the standard insert and when you reprint your bespoke insert, the artwork fee is never reapplied unless you amend your design. So whatever your issue, contact us for a no-obligation solution. Fork/Pallet Truck Inspection Checklist An inspection checklist spanning a range of Fork/Pallet trucks, utilised on one insert. Easily identify which checks are applicable for which asset, all branded in line with corporate colours. Machinery and Guard Pre-use Inspections Clear and concise pre-use inspections to be carried out - with 32 inspection boxes on the reverse. Space left for unique checks on each machine to be added. Colour Coded Safety System A custom designed colour coded system indicating a safe working period on site. Prominent use of your logo enforces the concept that the safe working policy originates with the company itself and not a third party. Bilingual Tags for the Chemical, Oil and Gas Industry 1 Customise your Visual Tagging Full colour printing We have the capacity to digitally print full colour images and photographs on our polypropylene insert materials, whether you require individualised tags identifying members of staff, machinery and equipment, or sequentially numbered and coded to comply with an auditing system. For more information on creating unique custom tagging systems or simply adding more colour to your tags with digital printing, please contact Customer Services: Tel: +44 (0)845 089 4060 Email: customer.services@scafftag.com 2 3 4 4 Request a sample tag Customise your tag

33. Working at Height 33 www.scafftag.co.uk Eyebolt Test Tag Eyebolt Test Tag is specifically designed for anchor points and provides a visual representation of the SWL (safe working load), Test Value and Date Tested. The system can work in conjunction with Scafftag’s unique electronic monitoring and recording system, SafeTrak, saving time and costs associated with managing and reporting on equipment inspections Eyebolt Tag helps you to comply with legislative requirements and good practices, ensuring: • Equipment is inspected and maintained at suitable periods • Employees are informed that equipment is within it’s inspection period Eyebolt Test Tag • Dimensions: 70mm (diameter) • Material: Polypropylene Order Reference Quantity MISC 115 100 Tags Do Not Use - Eyebolt Tag Eyebolt Do Not Use - clearly identify your eyebolt is left in prohibition, on what date and who to contact. Clear, concise and visible. The system can work in conjunction with Scafftag’s unique electronic monitoring and recording system, SafeTrak, saving time and costs associated with managing and reporting on equipment inspections • Tear resistant material • Water and weather proof Eyebolt Tag • Dimensions: 70mm (diameter) • Material: Polypropylene Order Reference Quantity SUND-MISC DNU PK25 25 Tags SUND-MISC DNU PK50 50 Tags Quickly leave equipment, tools or scaffold in prohibition and clearly communicate who did it and why. Quarantine Tag is a great source of safety communication and compliance in the workplace. Write with any pen in the comments box, wrap it around the asset and pull off the paper strip, revealing a see through sticky strip - it then seals over the text; hangs like a flag, showing ‘quarantined’ on one side and the details on the other. Order Reference Quantity MISC 160 50 Tags Quarantine Tag

3. 3 www.scafftag.co.uk Visual Tagging Solutions Holder Attaches to the equipment being tagged. Holder and Insert System Our visual tags typically comprise of two components: Insert Placed in the holder and used to record and display the latest equipment status. Attachment Methods Magnetic Strip Adhesive Strip Split Ring Hang Loop Cable Ties Strop Holder and Insert Work Together in a Looped Process Attach The empty holder displays ‘DO NOT USE...’ symbol and is attached to equipment. Inspect Equipment is inspected periodically, as deemed appropriate by risk assessment, and the results recorded on the insert. Insert If the equipment passes inspection then the insert is placed in the holder, displaying the latest equipment information to any users. If equipment fails inspection at any point, then simply remove the insert from the holder to display the ‘DO NOT USE...’ sign. 1 2 3 Fully recyclable resources Scafftag’s Visual Tagging inserts for equipment inspection management and 99% of the holders are fully recyclable. We are proud to do our part in protecting our planet’s valuable resources. The materials used in your holders and inserts lose only 1-2% of their physical properties when first recycled. They are reused to make parts for burglar alarms, switch cases, window lock systems, lift gibs and wheels.

54. SafeTrak 54 SafeTrak is a digital system that supports businesses with inspection planning, equipment inspections and inspection reporting to maximise safety, improve resource performance and minimise costs. To do this, SafeTrak offers: • Digital planning of regular equipment inspections • Guided, step-by-step customisable equipment inspections • Automated reporting on demand or at regular intervals • Digital book in/out for equipment. What is SafeTrak? Too many workplace accidents are still caused by using equipment that is not fit for use. These accidents can have grave consequences. Imagine a scaffold collapsing: co-workers and passers-by might be seriously injured with colossal impact for themselves, their families and your business. Think about what happens when your fire extinguishers do nothing when they should, when valves suddenly break down, or when the reverse warning indicator on a forklift does not work. Diligent inspection planning, thorough equipment inspections and clear inspection reports and histories can save lives, avoid suffering and major costs across multiple industries. Optimise equipment inspections with SafeTrak Digital equipment inspections offer a number of advantages: • Easy inspection planning complete with automated reminder emails • Accurate, standardised, customisable equipment inspections • Complete inspections on-the-job and immediately upload the completed template • Auto-generate reports in one click including the latest inspection data • Receive complete, auto-generated reports and audit trails at regular intervals via email. SafeTrak benefits SafeTrak mobile app The SafeTrak Mobile App can easily be accessed in the field on any smartphone. Internet access is not required. Log out after an inspection and the app will automatically upload data for immediate reporting once internet connection is restored. • Reduced errors: avoid retyping data by capturing field inspection results digitally, simply upload the data by logging out of the app • Immediate reporting: the SafeTrak web app automatically includes the data in predefined report templates SafeTrak web app 30 day free trial.

28. Working at Height 28 Holder Insert Scafftag ® MK1 The world leading Visual Tagging System for scaffolding to help prevent working at height hazards and manage scaffolding inspection procedures. • A Scafftag should be fitted at all access points (normally ladder access) from first build stage and remain on the structure until dismantle • Record all important details relating to the scaffold class, contact details etc. • Record the signature, time and date of up to 12 inspections per insert • Holder loop compatible with both Tube and Clip and System scaffolding Holder • Dimensions: 356mm (height) x 91mm (width) • Material: Nylon • Temperature Range: -20 °C to +80 °C • Attachment Method: Hung, Cable Tie Insert • Dimensions: 208mm (height) x 85mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Colour Coded Scafftag ® Inserts Take the query out of loading definitions with our clear colour coded, pictorial, scaffold inserts. Working alongside our Scafftag holder, efficiently manage your inspection procedures. • Record the signature, time and date of up to 12 inspections per insert • Holder loop compatible with both Tube and Clip and System scaffolding Insert • Dimensions: 208mm (height) x 85mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Order Reference Text/Legend Quantity Inserts Only STSI 479 Very Light Duty Use Only 1 MK1 Colour Coded Insert (Grey) STSI 480 Light Duty Use Only 1 MK1 Colour Coded Insert (Purple) STSI 481 General Purpose Use Only 1 MK1 Colour Coded Insert (Orange) STSI 482 Heavy Duty Use Only 1 MK1 Colour Coded Insert (Blue) STSI 483 Special Purpose Use Only 1 MK1 Colour Coded Insert (Brown) Insert: Load Class 1 Insert: Load Class 2 Insert: Load Class 3 Insert: Load Class 4 Insert: Special Purpose Order Reference Quantity Kits - Holders, Inserts, Pen, Pen Clip Holder & Pocket Guide STSH 10 MK1 Holders, 20 MK1 Inserts, 1 Pen SCAF-STSH 1A 1 MK1 Holder, 2 MK1 Insert, 1 Pen, 1 Pen Clip Holder, 1 Pocket Guide SCAF-STSH 5A 5 MK1 Holders,10 MK1 Inserts, 1 Pen, 5 Pen Clip Holders, 1 Pocket Guide Inserts Only STSI STD 1 MK1 Insert Holders & Pen SCAF-STH-A 10 MK1 Holders, 1 Pen

40. Workspace Control 40 Pen Clip Holder The Pen Clip Holder is unobtrusive (13 mm width) and suitable for attachment to Entrytag, Forkliftag, Chemtag and MEWP Tag. The Pen Clip Holder attaches to the side of the holder to ensure you always have a suitable pen at hand while completing your inspection and maintenance checks. Pens are not included, they must be ordered separately. The pen clip holders accommodate the Edding 141 F pen supplied as standard with certain products. Order Reference Quantity SUND-PENHOLDER 10 Pen Clip Holders Chemtag ® The Chemtag insert contains all the pertinent (from MSDS) information specific to the risks that hazardous substances pose, in case of emergency. (remove such as) Information includes: Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Permit Wallets Permit Document Wallets provide ultimate protection and full visibiltiy of permits/documents at the point of use. • UV and water resistant • Transparent front and back reducing the need to remove displayed documents • Accessed by zip closure (bottom to top) to ensure maximum water resistance • Available in A4 and A5 sizes Order Reference Quantity PW1 1 A4-Permit Wallets PW2 1 A5-Permit Wallets • Substance type • Details of hazards and precautions • Action to be taken in case of emergency • Supplier’s name and emergency telephone number • Details of how to dispose of the item Holder Insert Order Reference Quantity Kits - Holders, Inserts & Pen CTSH 10 Holders, 10 Inserts, 1 Pen Inserts Only CTI 1 Insert Holders & Pen CTH 10 Holders, 1 Pen

6. Plant, Vehicles, Machinery and Tools 6 Forkliftag ® Daily Inspection Booklet The Forkliftag ® Daily Inspection Booklet can record up to 252 daily inspections. Order Reference Quantity FLT-DCB 1 Booklet FLT-DCB-KIT 1 Holder, 2 Bookets, 1 Pen, 1 Pen Clip Holder • Fits in our Forkliftag holder • Contains an easy-to-follow pre-use operator guide • Contains Machine Defect Report • Sign and date your inspection checks with any type of ‘biro’ Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polyart (can be written on with a ‘biro’) • Temperature Range: -10 °C to +90 °C Forkliftag ® Forklift inspection system to help control pre-shift inspections, maintenance and identification of forklift trucks. • Easy-to-follow pre-use operator checklist • Record up to 42 daily inspections • Attach to forklift by cable tie or adhesive Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert Holder Forklift Truck Inspection Guide poster See page 49 for our useful Forklift Truck Inspection Guide - include one with your order. Ref. WS 07 Order Reference Quantity Kits - Holders, Inserts & Pen ETI 51 10 Holders, 10 Inserts, 1 Pen ETI51 1A 1 Holder, 5 Inserts, 1 Pen ETI51 2A 2 Holders, 10 Inserts, 1 Pen ETI51 3A 3 Holders, 15 Inserts, 1 Pen ETI51 4A 4 Holder, 20 Inserts, 1 Pen ETI51 5A 5 Holder, 25 Inserts, 1 Pen Inserts Only ETSI 51 1 Insert Holders & Pen ETSH 9 10 Holders, 1 Pen

32. Working at height 32 Towertag ® Towertag is designed to monitor the movement, build and inspection of a Tower at the point of use. Easily identify the user and/or the contractor responsible for the tower. • Make information regarding the mobile towers build easily available • Record up to 8 Mobile Tower movements • Up to 10 records of inspections Insert • Dimensions: 208mm (height) x 85mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Holder • Dimensions: 356mm (height) x 91mm (width) • Material: Nylon • Temperature Range: -20 °C to +80 °C • Attachment Method: Hung, Cable Tie, Insert can be secured to the holder for added security. Holder Insert Invaluable aide memoire, on site communication and training tool providing guidance on tower scaffolding components and inspection checks. Order Reference Quantity PM 2 1 Tower Inspection Guide Pocket Memo Aluminium Tower inspection Guide Pocket Memo Memo • Dimensions: 208mm (height) x 85mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Order Reference Quantity Kits - Holders, Inserts , Pen, Pen Clip Holders & Pocket Guide STSH 368 SLIT A 10 Holders, 20 Inserts, 1 Pen SCAF-STSH 368 1A 1 Holder, 5 Inserts, 1 Pen, 1 Pen Clip Holder, 1 Pocket Guide SCAF-STSH 368 5A 5 Holders, 10 Inserts, 1 Pen, 5 Pen Clip Holder, 1 Pocket Guide Inserts Only STSI 368 1 Insert Holders & Pen SCAFF-STH-368 SPLIT 10 Holders Thin nibbed permanent marker pens Ensure you have enough permanent marker pens to complete your inspections, when you need them. Pens supplied in boxes of 10 (Order Ref. STSM). Visit page 51 for more information.

30. Working at Height 30 Scaffolding Inspection - Blue Book Scafftag’s Blue Book for Scaffolding collates all the elements required to manage your scaffolding onsite in one protective binder. The Blue Book for Scaffolding contains legislative and risk assessment guidance, inspection reports, fault notification reports and handover certificates. Order Reference Quantity The Blue Book & Replacement Pages SIB 1 The Blue Book for Scaffolding SIB 1 1 The Blue Book for Scaffolding - Handover Certificates SIB 2 1 The Blue Book for Scaffolding - Inspection Reports SIB 3 1 The Blue Book for Scaffolding - Notification of Faults Scaffold inspection guide pocket memo provides an aide memoire on-site of key scaffolding components and checks Order Reference Quantity PM 1 1 Scaffold inspection guide pocket memo Scaffold Inspection Guide Pocket Memo Memo • Dimensions: 208mm (height) x 85mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Holder Scafftag MK2 is a larger version of our standard scaffolding tag. The holder is larger with more inspection records available on the insert (22). Scafftag MK2 helps to manage your scaffolding inspection procedures and help prevent working at height hazards. • A Scafftag should be fitted at all access points (normally ladder access) from first build stage and remain on the structure until dismantle • Record all important details relating to the scaffolding build; class it’s erected for, contact details etc • Record the signature, time and date of up to 22 inspections per insert • Holder loop compatible with both Tube and Clip and System scaffolding Holder • Dimensions: 285mm (height) x 151mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Hung, Cable Tie Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Scafftag ® MK2 Insert Order Reference Quantity Kits - Holders, Inserts & Pen STSH MK 2 10 MK2 Holders, 20 MK2 Inserts, 1 Pen Inserts Only STSI 369 ETS 1 MK2 Insert Holders & Pen STH 2 10 MK2 Holders, 1 Pen

37. Working at height 37 www.scafftag.co.uk Podiumtag Purpose designed status tagging system for podiums to control inspections, maintenance and identification, making it instantly visible at the point of use. Contains a handy, quick-reference podium inspection checklist to run through each time before using a podium. Helps you to comply with legislative requirements and good practices of: • Inspecting and maintaining equipment at suitable periods as deemed appropriate by a risk assessment • Ensuring employees are informed if equipment is in date, safe (not safe) to use Holder • Dimensions: 210mm (height) x 55mm (width) • Material: Polycarbonate • Temperature Range: -20 °C to +130 °C • Attachment Method: Cable Tie, Adhesive Strip Insert • Dimensions: 164mm (height) x 50mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Insert Holder Invaluable, on-site communication and training tool providing guidance on step ladder and podium inspection checks. Step Ladder and podium inspection pocket memo provides a quick and easy ‘go to’ reference guide, looking at key component pre-use and in-use checks. One side contains ladders information and the other side contains podiums. Order Reference Quantity PM 7 1 Step Ladder and Podium Pocket Memo Step Ladder and Podium Pocket Memo Memo • Dimensions: 208mm (height) x 85mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Order Reference Quantity Kits - Holders, Inserts, Pen & Pen Clip Holder EITH/L700 10 Holders, 10 Inserts, 1 Pen MUL-EITH/L 700 5A 5 Holders, 10 Tag Inserts, 1 Pen & 5 Pen Clips Inserts Only EITL700 1 Insert Holders & Pen EITH 10 Holders, 1 Pen Pen clip holder accessory Ensure you always have a pen at hand while completing your inspection and maintenance checks. See page 51 for more details.

2. 2 Contents 3 Visual Tagging Solutions 4 Customisation 5 Personalisation 6 Plant, Vehicles, Machinery & Tools 6 Forkliftag ® 6 Forkliftag ® Daily Inspection Booklet 7 Telehandler-tag 7 Combi-tag 8 Reach Truck-tag 8 Ride-on Pallet Truck-tag 9 Stacker-tag 9 PPT-tag 10 Pallet Truck Tag 10 LOLER Tag 11 Mewptag 11 Cherry Picker-tag 12 Racktag 12 Conveyor-tag 13 Dumper Truck-tag 13 Excavator-tag 14 Tractor-tag 14 ATV-tag 15 Vehicle-tag 15 Van-tag 16 Unitag ® for Lifting Equipment 17 Nanotag™ for Lifting Equipment 18 Multitag ® 18 Multitag ® Weekly 19 Unitag ® for Machinery 20 Nanotag™ for Machinery 21 Microtag ® for Machinery 22 Microtag ® for Electrical Equipment 23 Microtag ® for PAT Testing 23 Adhesive Labels for PAT Testing 24 Nanotag™ for Electrical Equipment 25 Microtag ® for HAVs - Max. Daily Use 25 Microtag ® for HAVs - Vibration Points System 26 Nanotag™ for Fire and Emergency 26 Emergency Equipment Inspection Tag 27 Eyewash Station/Emergency Equipment Tag 27 Soft Service Inspection Tag Visual Tagging Solutions Safety. Maintenance. Identification. Think about any item of equipment on your site: • How do you know it is fit for use? • When was it last inspected? • How do you identify it among the hundreds of similar items? In fact! Whatever your equipment – we can tag it! 28 Working at Height 28 Scafftag ® MK1 28 Colour Coded Scafftag ® Inserts 29 Scafftag Mulitpack 29 Structural Tie Tags 29 Barrier Tag 30 Scafftag ® MK2 30 Scaffolding Inspection - Blue Book 30 Scaffold Inspection Guide Memo 31 Scaffolding Special Status Inserts 31 Scaffolding Prohibition Inserts 32 Towertag ® 32 Aluminium Tower Inspection Guide Pocket Memo 33 Eyebolt Test Tag 33 Do Not Use - Eyebolt Tag 33 Scaffold Quarantine Tag 34 Laddertag ® 34 Ladder, Step Ladder and Podium Inspection Guide Memo 35 Ladder Management - Yellow Book 35 Ladder Inspection Kit 36 Microtag ® for Steps and Stools 36 Nanotag™ for Steps and Stools 37 Podiumtag 37 Step Ladder and Podium Pocket Memo 38 Nanotag™ for Harness 39 Workspace Control 39 Entrytag ® 39 Man In Confined Space Tag and Man In Tank Tag 40 Permit Wallets 40 Pen Clip Holder 40 Chemtag ® 41 Excavation-tag 41 TempWorks-tag 42 Fencing-tag 42 Hoarding-tag 43 Asbestos Tag 43 Asbestos Warning Labels 44 Covid-19 Cleaning Compliance 44 Covid-19 Safety Signs 45 Process & Pipelines 45 Flange and Leak Test Tag 45 Isolation-tag 46-47 Process Tags 48-53 Accessories 54-55 SafeTrak Without the latest information, people are prone to make assumptions. Assumptions can lead to potentially damaging decisions for both them and your business. The identity, maintenance and inspection status of equipment is therefore critical. What are visual tags? • Communicate the latest equipment inspection and test status clearly at the point of use • Record an audit trail of recent equipment maintenance, tests and inspections • Uniquely identify equipment • Comply with Health and Safety Legislation • Reduce accidents in the work place We can help you with Visual Tagging for Work at Height, Plant, Vehicles, Machinery & Tools, Workspace Control and Process & Pipelines. Visual tags help: All the Scafftag Visual Tagging Solutions illustrated in this catalogue are available in a variety of languages. Please contact Customer Services for more details: Tel: +44 (0)845 089 4060 Email: customer.services@scafftag.com German French Dutch Norwegian English Finnish Swedish Turkish Russian Danish Did You Know?

31. Working at Height 31 www.scafftag.co.uk Scaffolding Prohibition Inserts Scaffolding Prohibition Inserts are designed to operate with Scafftag MK1 and MK2 holders (pages 28 and 29) helping to identify working at height hazards and efficiently manage inspection procedures. • Clearly identify at access point the reasons why the scaffold is in prohibition Scaffolding Special Status Inserts Special Status Inserts are designed to operate with Scafftag MK1 holders (page 28) and provide a visual warning to users that the scaffold is not to be used. Order Reference Text/Legend Quantity STSI PD Awaiting Dismantle Do Not Use Scaffold 1 Insert STSI S22 Scaffold Not To Be Used Beyond This Point 1 Insert Insert • Dimensions: 208mm (height) x 85mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C MK2 Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C MK 1 Insert • Dimensions: 208mm (height) x 85mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Insert: Awaiting Dismantle Do Not Use Scaffold Inserts: Scaffold Not To Be Used Beyond This Point Insert: SCAFF-STSI-PRO-10 Insert: STSIP-ETS Order Reference Text/Legend Quantity STSIP Prohibition Notice - Do Not Use Scaffold 1 MK1 Insert STSIP ETS Prohibition Notice - Do Not Use Scaffold 1 MK2 Insert What is RFID Technology? Radio Frequency Identification (RFID) is an automatic identification system which utilises radio waves to transfer a unique ID from a storage medium to a device configured to read it. RFID does not require physical contact between the reader and the storage medium for data transfer to occur, the signal is also able to pass through different objects dependent on their physical properties i.e. low frequency radio waves are more effective in environments where there is a lot of metal present. What is SafeTrak? SafeTrak is a digital system that supports businesses with inspection planning, equipment inspections and inspection reporting to maximise safety, improve resource performance and minimise costs. The SafeTrak software, combined with devices which can read our RFID enabled tags, uniquely identify assets and their inspection status. See page 54 more information about SafeTrak.

39. Workspace Control 39 www.scafftag.co.uk Entrytag ® Entrytag is designed to help prevent accidents and efficiently manage inspection procedures within confined spaces. • Record information relating to the confined space such as permit numbers, test dates, PPE and safety equipment required • Record up to 42 shift inspections • Alternative Entrytag holder with magnetic attachment available Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Man In... Used in conjunction with Entrytag, each authorised person(s) has a dedicated Man in Confined Space or Man in Tank Tag (containing their details). The tag attaches to the Entrytag before entering a confined space, removing the tag when leaving. By counting the number of Man in Tags at the point of entry, it is instantly clear how many people are working in the confined space. • Dimensions: 164mm (height) x 50mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C EITL 577 Legend: Man in Confined Space EITL 529 Legend: Man in Tank Order Reference Text/Legend Quantity EITL 577 Man in Confined Space 1 Ta g EITL 529 Man in Tank 1 Ta g Entrytag ® holder metal fixing ring The metal fixing rings enable the attachment of Man in... tags to the Entrytag holder (Order Ref. ENT-CLIP). See page 51 for more details. Holder Insert Order Reference Quantity Kits - Holders, Inserts & Pen ETI 10 Entrytag Holders, 10 Entrytag Inserts, 1 Pen Inserts Only ETSI 1 Entrytag Insert Holders, Magnetic Holders & Pen ETSH 10 Entrytag Holders, 1 Pen ETSH-MAG-A 10 Entrytag Holders (magnetic attachment) 1 Pen Magnetic Holder

48. Accessories 48 Please turn to page 28 more information on Scafftag holders and inserts. The Inspection Timer for Scaffolding clearly highlights when the next scheduled scaffold inspection is required. The timer is equipped with a series of identifying LEDs which flash regularly, indicating the current status of the inspection due period. Time for inspection Save lives The Inspection Timer for Scaffolding can easily be attached to the Scafftag holder and is exclusively designed to fit to all existing MK1 Scafftag holders. At the end of the 7 day scaffold inspection interval and after re-inspection of the scaffold the timer can be reset for the following 7 day inspection. The batteries will allow up to 1 year constant use. A battery status indicator will display the remaining battery charge. Easy and practical Unlike other scaffold inspection solutions, the Inspection Timer’s LED lights can be seen from a distance and actively draw attention to the upcoming inspection due schedule. By using the Inspection Timer for Scaffolding you further reduce the potential for a scaffold inspection being missed, helping you make your workplace a safer environment for your employees. The innovative Inspection Timer for Scaffolding can help save lives by clearly showing when the scaffold inspection is required. The LED lights grab the attention of users, inspectors and other workers alike, helping to ensure that the scaffold inspection ‘due date’ is not exceeded. Innovative Inspection Timer for Scaffolding Order Reference Quantity Expiration Time SIT7 1 Inspection Timer for Scaffolding 7 Days The Inspection Timer for Scaffolding is compatible with the Scafftag MK1 and the Towertag MK1 holders. Please visit scafftag.co.uk website for more information or contact us on: Tel: +44 (0)845 089 4060 Email: customer.services@scafftag.com Order Reference Quantity Expiration Time 150745 10 Inspection Timers 7 Days 150746 10 Inspection Timers 30 Days 150749 10 Inspection Timers 356 Days Inspection Timer (7, 30 or 365 days) Scafftag’s Inspection Timer clearly highlights when the next planned maintenance intervention is due. Versions are available that count down 7 days, 30 days and 365 days. (90 and 180 day versions are available on request). Each version is equipped with a dark green, light green, yellow and flashing red LED light that indicate a recently inspected up to an uncertain equipment status. Includes: 3 - AAA Alkaline Batteries Includes: 3 - AAA Alkaline Batteries

8. Plant, Vehicles, Machinery and Tools 8 Ride-on Pallet Truck-tag Insert Holder Reach Truck-tag Complying with PUWER is important. Simplicity is paramount. Use the Reach Truck-tag to help control pre-use checks, inspections, maintenance and indentification. The insert contains an easy-to-follow pre-use operator checklist and the facility to record up to 32 inspection on the opposite side. • Help create and control pre-use inspections, maintenance and identification of your Reach Truck • Position in an optimal location. The user can easily ascertain if the pre-use inspection has been carried out or if the asset is in prohibition • Ease of use and visibility ensures daily inspections are carried out • Remove the insert and the holder alone puts the asset immediately into probition with an ‘Inspection Required’ status Insert Holder Complying with PUWER is important. Simplicity is paramount. Use the Ride-on Pallet Truck-tag to help control pre-use checks, inspections, maintenance and indentification. The insert contains an easy-to-follow pre-use operator checklist and the facility to record up to 32 inspection on the opposite side. • Help create and control pre-use inspections, maintenance and identification of your Ride-on Pallet Truck • Position in an optimal location. The user can easily ascertain if the pre-use inspection has been carried out or if the asset is in prohibition • Ease of use and visibility ensures daily inspections are carried out • Remove the insert and the holder alone puts the asset immediately into probition with an ‘Inspection Required’ status Order Reference Quantity Kits - Holders, Inserts & Pen ENT-ETI REACH 10 Holders, 10 Inserts, 1 Pen ENT-ETI REACH 1A 1 Holders, 5 Inserts, 1 Pen ENT-ETI REACH 2A 2 Holders, 10 Inserts, 1 Pen ENT-ETI REACH 3A 3 Holders, 15 Inserts, 1 Pen ENT-ETI REACH 4A 4 Holders, 20 Inserts, 1 Pen Inserts Only ENT-ETSI REACH 1 Insert Holders & Pen ETSH-TW 10 Holders, 1 Pen Order Reference Quantity Kits - Holders, Inserts & Pen ENT-ETI ROPT 10 Holders, 10 Inserts, 1 Pen ENT-ETI ROPT 1A 1 Holders, 5 Inserts, 1 Pen ENT-ETI ROPT 2A 2 Holders, 10 Inserts, 1 Pen ENT-ETI ROPT 3A 3 Holders, 15 Inserts, 1 Pen ENT-ETI ROPT 4A 4 Holders, 20 Inserts, 1 Pen ENT-ETI ROPT 5A 5 Holders, 25 Inserts, 1 Pen Inserts Only ENT-ETSI ROPT 1 Insert Holders & Pen ETSH-TW 10 Holders, 1 Pen Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C

7. Plant, Vehicles, Machinery and Tools 7 www.scafftag.co.uk Combi-tag Combilift inspection system provides you with all the tools you need to inspect, maintain and identify your combilift, improving safety in the workplace. Ensure all important inspection information is clearly displayed in a prominent position on the combilift. Use the Combi-tag inspection insert to help control pre-use checks, inspections, maintenance and identification. The insert contains an easy-to-follow pre-use operator checklist on the front and the facility to record up to 32 inspections on the reverse. • Ease of use and visibility ensures daily inspections are carried out • Remove the insert and the holder alone puts the combilift immediately into prohibition with an “Inspection Required” status • Holder is permanently attached to the combilift in a prominent position with either a cable tie, adhesive, screw or rivet Insert Holder Telehandler-tag Telehandler inspection system to help control pre-shift inspections, maintenance and identification of Telehandlers. • Easy-to-follow pre-use operator checklist • Record up to 42 daily inspections Insert Holder Order Reference Quantity Kits - Holders, Inserts & Pen TELE-ETI 1106 A 10 Holders, 10 Inserts, 1 Pen TELE-ETI 1106 1A 1 Holders, 5 Inserts, 1 Pen TELE-ETI 1106 2A 2 Holders, 10 Inserts, 1 Pen TELE-ETI 1106 3A 3 Holders, 15 Inserts, 1 Pen TELE-ETI 1106 4A 4 Holders, 20 Inserts, 1 Pen TELE-ETI 1106 5A 5 Holders, 25 Inserts, 1 Pen Inserts Only TELE-ETSI 1106 1 Insert Holders & Pen TELE-ETSH 1106 A 10 Holder, 1 Pen Order Reference Quantity Kits - Holders, Inserts & Pen ENT-ETI COMBI 10 Holders, 10 Inserts, 1 Pen ENT-ETI COMBI 1A 1 Holders, 5 Inserts, 1 Pen ENT-ETI COMBI 2A 2 Holders, 10 Inserts, 1 Pen ENT-ETI COMBI 3A 3 Holders, 15 Inserts, 1 Pen ENT-ETI COMBI 4A 4 Holders, 20 Inserts, 1 Pen ENT-ETI COMBI 5A 5 Holders, 25 Inserts, 1 Pen Inserts Only ENT-ETSI COMBI 1 Insert Holders & Pen ETSH-TW 10 Holders, 1 Pen Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C

22. Plant, Vehicles, Machinery and Tools 22 Microtag ® for Electrical Equipment Microtag for Electrical Equipment is designed to clearly display the Next Test Date at the point of use. • A selection of coloured inserts are available providing the option of additional visual qualification • MTI GP insert records the Next Test Date • A barcoded Microtag holder is also available Holder • Dimensions: 81mm (height) x 38mm (width) • Material: Nylon • Temperature Range: -20 °C to +80 °C • Attachment Method: Cable Tie, Adhesive Strip Insert • Dimensions: 47mm (height) x 30mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Design: Identical both sides Microtag ® nylon cable tie attachment method Barcoded Holder Order Reference Text/Legend Quantity Kits - Holders, Inserts & Pen MIC-PK GP Next Test Date 20 Holders, 20 GP Inserts, 1 Pen Inserts Only MTIGP Next Test Date 1 GP Insert Holders, Nylon Cable Ties & Pen MIC-MTH A. Do Not Use Equipment 20 Holders, 40 Cable Ties (150mm), 1 Pen MTH/B Do Not Use Equipment 20 Bar-Code Holders, 40 Cable Ties (150mm), 1 Pen Holder Insert Insert colours available: Blue Green Orange Purple Red White Yellow When ordering Nanotag and Microtag kits/inserts please quote the Order Reference followed by the colour required e.g. MIC-PK GP BLUE, MTIGP RED etc. Ordering information Nylon cable ties come as standard with our Microtag holders (Order Ref. SUND-CABLE TIES). If you need to restock, or the option of stainless steel and reusable cable tie attachment methods, please visit page 50.

38. Working at Height 38 Nanotag™ for Harness Nanotag for harnesses is designed to quickly and clearly display the Next Inspection Date at the point of use. • A selection of coloured inserts are available providing the option of additional visual qualification Holder • Dimensions: 54mm (height) x 26mm (width) • Material: Nylon 6 • Temperature Range: -20 °C to +80 °C • Attachment Method: Split Ring, Cable Tie • Extra Feature: Embedded RFID chip as standard Insert • Dimensions: 34mm (height) x 18mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Design: Identical both sides Nanotag™ holder split ring attachment method The attachment holes in the holders are large enough to accommodate split rings (Order Ref. NAN-RING). See page 51 for more details. Holder Insert Order Reference Text/Legend Quantity Kits - Holders, Inserts, Split Rings, Pen & Harness Register NAN-PK GPI Next Inspection Date Due 20 Holders, 20 GPI Inserts, 1 Pen NAN-PK GPI Y 10A Next Inspection Date Due 10 Holders, 20 GPI Inserts, 10 Split Rings,1 Pen, 1 Harness Register Download Inserts Only NAN-GPI Next Inspection Date Due 1 GPI Insert Holders, Nylon Cable Ties & Pen NANO-H Reference Number 20 Holders, 40 Cable Ties (150mm), 1 Pen Insert colours available: Blue Green Orange Purple Red White Yellow When ordering Microtag kits/inserts please quote the Order Reference followed by the colour required e.g. NAN-PK GPI GREEN, NAN-GPI RED etc. Ordering information New Kit Available

49. Accessories 49 www.scafftag.co.uk Scaffold Inspection Guide Poster Scaffold Inspection Guide wall sheet detailing key scaffolding components, legislation requirements and inspection checks (encapsulated version available). Order Ref. Quantity WS 01 25 Scaffold Inspection Guide Posters WS 01 ENCAP 25 Scaffold Inspection Guide Posters (Encapsulated) Scafftag 3 Stage System Poster A2 Wall sheet Guide to Scafftag Scaffold Systems Poster. Outlines to users how to correctly use the Scafftag tagging system and related systems available. Order Ref. Quantity WS 03 25 Scafftag 3 Stage System Posters Ladder Inspection Guide Poster Ladder Inspection Guide Poster details key components, user’s do’s and don’ts and legislation requirements. Updated to align with BS EN 131 (encapsulated version available). Order Ref. Quantity WS 04 25 Ladder Inspection Guide Posters WS 04 ENCAP 25 Ladder Inspection Guide Posters (Encapsulated) Asbestos Inspection Guide Poster Invaluable, handy on-site communication and training tools providing guidance on typical locations of asbestos containing materials and management duties. Order Ref. Quantity WS 05 25 Asbestos Inspection Guide Posters Working with the Regulations A Guide to the Control of Asbestos Regulations 2012 provides a flowchart to identify your duties under the regulations. Order Ref. Quantity WS 05a 25 A Guide to the Control of Asbestos Posters Forklift Inspection Guide Poster Forklift inspection guide posters to be used as handy on-site communication and training tools providing guidance on forklift components, management data requirements and safe usage. Order Ref. Quantity WS 07 25 Forklift Inspection Guide Posters

16. Plant, Vehicles, Machinery and Tools 16 Unitag ® for Lifting Equipment Unitag for lifting equipment is designed to clearly display the SWL/Next Inspection Date at the point of use. Holder • Dimensions: 50mm (diameter) • Material: Nylon • Temperature Range: -20 °C to +80 °C • Attachment Method: Strop (stainless steel) Insert • Dimensions: 41mm (diameter) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Design: Identical both sides Insert Holder • A selection of coloured inserts are available providing the option of additional visual qualification • Unitag holders can be supplied with Stainless Steel, Plastic Wire Coated Strop or Nylon attachments Insert colours available: Blue Green Orange Purple Red White Yellow When ordering SWL Unitag tag kits/inserts please quote the Order Reference followed by the colour required e.g. UNI-UNH-SS-6-PK BLUE, UNI I RED etc. Ordering information Order Reference Text/Legend Quantity Kits - Holders, Inserts, Strops & Pen UNI-UNH-SS-6-PK Safe Working Load, Next Inspection Date Due 20 Holders, 20 SWL Inserts, 20 Stainless Steel Strops (150mm), 1 Pen Inserts Only UNI I Safe Working Load, Next Inspection Date Due 1 SWL Insert Holders, Strops & Pen UNH 6” SS STR.A Do Not Use 20 Holders, 20 Stainless Steel Strops (150mm), 1 Pen UNH 6 Do Not Use 20 Holders, 20 Nylon Strops (150mm), 1 Pen UNH 6PC-A Do Not Use 20 Holders, 20 Plastic Coated Wire Strops (150mm), 1 Pen UNH 9 A Do Not Use 20 Holders, 20 Nylon Strops (225mm), 1 Pen UNH (M) Do Not Use 20 Holders, 20 Stainless Steel Strops (225mm), 1 Pen UNH PC 9 A Do Not Use 20 Holders, 20 Plastic Coated Wire Strops (225mm), 1 Pen UNH 12 A Do Not Use 20 Holders, 20 Nylon Strops (300mm), 1 Pen For attachment, Unitag comes with plastic nylon or plastic coated wire strops as standard. If a more durable attachment is required, stainless steel strops can be added as an option. See page 51 for more details. Keep your tags attached

10. Plant, Vehicles, Machinery and Tools 10 Pallet Truck Tags With the new Pallet Truck Tag from Scafftag, companies can increase legal compliance, support better pallet truck checks and share inspection results on the equipment itself to improve pallet truck safety. Holder • Dimensions: 210mm (height) x 55mm (width) • Material: Polycarbonate • Temperature Range: -20 °C to +130 °C • Attachment Method: Cable Tie, Adhesive Strip Insert • Dimensions: 164mm (height) x 50mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Insert Holder Insert Holder LOLER Tag A specifically designed status tagging system for all for all equipment types covered by the UK Lifting Operations Regulations (LOLER) 1998 such as overhead cranes, lifting tables and loading platforms. • Ensure employees are informed of inspection data and Safe Working Loads (SWL) Holder • Dimensions: 210mm (height) x 55mm (width) • Material: Polycarbonate • Temperature Range: -20 °C to +130 °C • Attachment Method: Cable Tie, Adhesive Strip Insert • Dimensions: 164mm (height) x 50mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Please turn to pages 16 and 17 for Safe Working Load tags. Order Reference Quantity Kits - Holders, Inserts, Pen, Pen Clip Holder & Pocket Guide MUL-EITH/L 1450 10 Holders, 10 Inserts, 1 Pen MUL-EITH/L 1450 1A 1 Holder, 5 inserts, 1 Pen,1 Pen Clip Holder MUL-EITH/L 1450 5A 1 Holder, 5 inserts, 1 Pen, 1 Pen Clip Holder, 1 Pocket Guide Inserts Only EITL 1450 1 Insert Holders & Pen EITH 10 Holders, 1 Pen Order Reference Quantity Kits - Holders, Inserts & Pen EITH/L 445 10 Holders, 10 Inserts, 1 Pen Inserts Only EITL 445 1 Insert Holders & Pen EITH 10 Holders, 1 Pen

14. Plant, Vehicles, Machinery and Tools 14 Tractor-tag Give your employees the tools they need to identify, maintain and inspect tractors, improving safety in the workplace. Ensure the equipment is instantly identifiable, the pre-use checks are clear and easily carried out. Inserts have the facility to record up to 32 inspections, are weatherproof and robust. ATV-tag Purpose designed status insert to help control frequent inspections, maintenance and identification of ATV’s (All Terrain Vehicles / Quad Bikes). Inserts have the facility to record up to 32 inspections, are weatherproof and robust. Insert Holder Insert Holder • Holder is permanently attached to the ATV in a prominent position with either cable tie, adhesive or rivet • Remove the insert and the holder immediately specifies ‘Inspection Required’ • The insert contains an easy-to-follow pre-use operator checklist and the facility to record up to 32 inspections • Designed to operate alongside the ‘inspection required’ Tag holder Order Reference Quantity Kits - Holders, Inserts & Pen ENT-ETI-TRAC 10 Holders, 10 Inserts, 1 Pen ENT-ETI-TRAC 1A 1 Holders, 5 Inserts, 1 Pen ENT-ETI-TRAC 2A 2 Holders, 10 Inserts, 1 Pen ENT-ETI-TRAC 3A 3 Holders, 15 Inserts, 1 Pen ENT-ETI-TRAC 4A 4 Holders, 20 Inserts, 1 Pen Inserts Only ETSI TRAC 1 Insert Holders & Pen ETSH-TW 10 Holders, 1 Pen Order Reference Quantity Kits - Holders, Inserts & Pen ENT-ETI ATV 10 Holders, 10 Inserts, 1 Pen ENT-ETI ATV 1A 1 Holders, 5 Inserts, 1 Pen ENT-ETI ATV 2A 2 Holders, 10 Inserts, 1 Pen ENT-ETI ATV 3A 3 Holders, 15 Inserts, 1 Pen ENT-ETI ATV 4A 4 Holders, 20 Inserts, 1 Pen ENT-ETI ATV 5A 5 Holders, 25 Inserts, 1 Pen Inserts Only ENT-ETSI ATV 1 Insert Holders & Pen ETSH-TW 10 Holders, 1 Pen • Holder is permanently attached to the tractor in prominent position with either cable tie, adhesive or rivet • Remove the insert and the holder immediately specifies ‘Inspection Required’ Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C

43. Workspace Control 43 www.scafftag.co.uk EITH 560 EITL 560 Asbestos Tag (Asbestos Asbestos Management Tagging) A complete asbestos tagging system to ensure latest status is instantly visible at all areas at risk of having Asbestos Containing Materials (ACMs) present. Helps you comply with legislative requirements and good practices of: • Working alongside your Asbestos Register, inspecting ACM at periods denoted by your risk assessment (not exceeding 12 months). • Visually display warnings at each location that ACM’s are present and have been visually inspected. • Holder denotes area is not asbestos free and NO remedial works should be carried out without further investigation. Holder • Dimensions: 210mm (height) x 55mm (width) • Material: Polycarbonate • Temperature Range: -20 °C to +130 °C • Attachment Method: Cable Tie, Adhesive Strip Insert • Dimensions: 164mm (height) x 50mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C EITH 604 EITL 604 Asbestos Inspection Guide posters See page 49 for our useful Asbestos Inspection Guides - (i) where it could be (ii) working with the regulations. Ref. WS 05 & WS 05a Order Reference Quantity MISC 24 Asbestos warning label MISC 23 Asbestos warning label MISC 22 Asbestos warning label MISC 21 Asbestos warning label Misc 24 Misc 23 Misc 22 Misc 21 Asbestos Warning Labels Self-adhesive stickers, visual communicating the current status from your asbestos survey. Areas where asbestos containing materials (ACM’s) have been confirmed as: • Containing • May contain • Asbestos free Order Reference Quantity Kits - Holders, Inserts & Pen EITH/L 560 10 Holders, 10 Green Inserts, 1 Pen EITH/L 604 10 Holders, 10 Red Inserts, 1 Pen Inserts Only EITL 560 1 Green Insert EITL 604 1 Red Insert Holders & Pen EITH 560 10 Holders for Green Inserts, 1 Pen EITH 604 10 Holders for Red Inserts, 1 Pen

42. Workspace Control 42 Holder Fencing-tag Our Fencing-tag enables you to increase compliance and workplace safety by communicating vital information on the fencing itself where it can be seen by all workers. • Increase workplace safety by sharing vital information within the fenced area with every worker • Stay compliant in any weather: when applied correctly, the durable tag will stay attached and remain legible in outdoor conditions if written on with a permanent marker • When the insert is removed it clearly states on the holder that the fencing may be unsafe. Do not store or lean materials against the structure. Hoarding-tag The Hoarding-tag enables companies to increase compliance and workplace safety by communicating vital information about the hoarding and within the hoarded area where it can be seen by all workers. • Increase workplace safety by sharing vital information on the hoarding and within the hoarded area with every worker • Stay compliant in any weather: when applied correctly, the durable tag will stay attached and remain legible in outdoor conditions if written on with a permanent marker • When the insert is removed it clearly states on the holder that the hoarding may be unsafe. Do not store or lean materials against the structure. Holder Insert Insert Order Reference Quantity Kits - Holders, Inserts & Pen ENT-ETI-FENC 10 Holders, 10 Inserts, 1 Pen Inserts Only ETSI-F 1 Insert Holders & Pen ETSH-HF 10 Holders, 1 Pen Order Reference Quantity Kits - Holders, Inserts & Pen ENT-ETI-HOARD 10 Holders, 10 Inserts, 1 Pen Inserts Only ETSI-H 1 Insert Holders & Pen ETSH-HF 10 Holders, 1 Pen Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C

44. Workspace Control 44 Holder Covid-19 Cleaning Compliance In times of COVID19 clean areas are most important to protect customers, employees and business partners. • Clearly highlight which areas are clean and observed • Quickly show that checks have been carried out • If the insert is removed, the holder instantly shows that cleaning is required • Adds a level of safety beyond the basics of verbal information • Documentation of a hygiene plan via a tagging system is seen as best practice. Insert Covid-19 Safety Signs Order Reference Height (mm) Width (mm) Quantity COVID-19-REC-EN 371 262 1 Reception Safety Sign SITE SAFETY COVID-19-REC2-EN 371 262 1 Reception Safety Sign SITE SAFETY Order Reference Height (mm) Width (mm) Quantity COVID-19-GEN-EN 262 371 1 General Safety Sign SITE SAFETY SOCIAL-DISTANCE-EN 80 800 1 Social Distance Sign RESPECT SOCIAL DISTANCE Order Reference Quantity Kits - Holders, Inserts & Pen COV-ETI 1654 10 Holders, 10 Inserts, 1 Pen Inserts Only COV-ETSI 1654 1 Insert Holders & Pen COV-ETSH 1654 10 Inserts, 1 Pen Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C

11. Plant, Vehicles, Machinery and Tools 11 www.scafftag.co.uk Insert Holder Mewptag Mewptag is designed to help control frequent inspections, maintenance and identification of MEWPs (Mobile Elevating Work Platforms). • The Mewptag Insert contains an easy-to-follow pre-use operator checklist and space to record up to 32 inspections • The holder provides multiple attachment options such as cable tie or adhesive. • Ensures MEWP operators are informed of latest equipment status clearly at the point of use Cherry Picker-tag Purpose designed status tagging system to help control frequent inspections, maintenance and identification of your Cherry Picker a MEWP variant (Mobile Elevating Work Platforms). Helps you to comply with legislative requirements and good practices of: • Completing a pre-work inspection before each use of the equipment and ensuring this is recorded • Inspecting and maintaining equipment at suitable periods as deemed appropriate by a risk assessment • Ensuring employees are informed if equipment is not safe to use Insert Holder Order Reference Quantity Kits - Holders, Inserts & Pen ETI 550 A 10 Holders, 10 Inserts, 1 Pen ETI 550 1A 1 Holders, 5 Inserts, 1 Pen ETI 550 2A 2 Holders, 10 Inserts, 1 Pen ETI 550 3A 3 Holders, 15 Inserts, 1 Pen ETI 550 4A 4 Holders, 20 Inserts, 1 Pen ETI 550 5A 5 Holders, 25 Inserts, 1 Pen Inserts Only ETSI 550 1 Insert Holders & Pen ETSH 550 10 Holders, 1 Pen Order Reference Quantity Kits - Holders, Inserts, Pen & Pen Clip Holders ENT-ETI-CPI 10 Holders, 10 Inserts, 1 Pen ENT-ETI CPI 1A 1 Holder, 5 Inserts, 1 Pen, 1 Pen Clip Holder ENT-ETI CPI 2A 2 Holders, 10 Inserts, 1 Pen, 2 Pen Clip Holders ENT-ETI CP1 3A 3 Holders, 15 Inserts, 1 Pen, 3 Pen Clip Holders ENT-ETI CPI 4A 4 Holders, 20 Inserts, 1 Pen, 4 Pen Clip Holders ENT-ETI CPI 5A 5 Holders, 25 Inserts, 1 Pen, 5 Pen Clip Holders Inserts Only ETSI-CPI 1 Insert Holders & Pen ETSH550 V2 10 Holders, 1 Pen Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C

12. Plant, Vehicles, Machinery and Tools 12 Insert • Dimensions: 147mm (height) x 105mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Design: Identical both sides Holder • Dimensions: 171mm (height) x 131mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Racktag Equipment status management tag for racking and shelving. Convey the pertinent information regarding the racking installation and purpose. Control your inspections and identify quickly should the racking require an inspection. Insert Holder Order Reference Quantity Kits - Holders, Inserts & Pen OMN-PORT-PK-OTSI 5 10 Holders, 10 Inserts, 1 Pen Inserts Only OTSI 5 1 Insert Holders & Pen OMN-OTH-PORT-A 10 Holders, 1 Pen Conveyor-tag Conveyor tagging systems provide you with all the tools you need to inspect and maintain conveyors, improving safety in the workplace. Use the Conveyor-tag inspection insert to help control pre-use checks, inspections, maintenance and identification. The insert contains an easy-to-follow pre-use operator checklist on the front and the facility to record up to 32 inspections on the reverse. Insert Holder • Ease of use and visibility ensures daily inspections are carried out • Remove the insert and the holder alone puts the conveyor immediately into prohibition with an “Inspection Required” status • Holder is permanently attached to the conveyor in a prominent position with either a cable tie, adhesive, screw or rivet Order Reference Quantity Kits - Holders, Inserts & Pen ENT-ETI CONV 10 Holders, 10 Inserts, 1 Pen ENT-ETI CONV 1A 1 Holders, 5 Inserts, 1 Pen ENT-ETI CONV 2A 2 Holders, 10 Inserts, 1 Pen ENT-ETI CONV 3A 3 Holders, 15 Inserts, 1 Pen ENT-ETI CONV 4A 4 Holders, 20 Inserts, 1 Pen ENT-ETI CONV 5A 5 Holders, 25 Inserts, 1 Pen Inserts Only ENT-ETSI CONV 1 Insert Holders & Pen ETSH-TW 10 Holders, 1 Pen Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C

18. Plant, Vehicles, Machinery and Tools 18 Multitag ® Multitag, the generic solution for all workplace equipment where space is restricted for tag attachment. • Ensure workers are aware of the latest equipment status • Records up to 12 records of Next Inspection Due Date Holder • Dimensions: 210mm (height) x 55mm (width) • Material: Polycarbonate • Temperature Range: -20 °C to +130 °C • Attachment Method: Cable Tie, Adhesive Strip Insert • Dimensions: 164mm (height) x 50mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Multitag ® Weekly (Weekly Inspection Tag) The Weekly Inspection Tag enables companies to increase compliance and workplace safety by showing on the equipment itself, it’s in date and fit for use. • Recording ‘date inspected’ to ensure ease of use. Notes inspection frequency is every 7 days. • Increase workplace safety by sharing inspection information at the asset with every worker • Stay compliant in any weather. Robust, weather and tear proof. Remains legible in outdoor conditions when written on with a thin-nibbed permanent marker Holder • Dimensions: 210mm (height) x 55mm (width) • Material: Polycarbonate • Temperature Range: -20 °C to +130 °C • Attachment Method: Cable Tie, Adhesive Strip Insert • Dimensions: 164mm (height) x 50mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Insert Holder Insert Holder Order Reference Quantity Kits - Holders, Inserts, Pen & Pen Clip Holders EITH/L 10 Holders, 10 Inserts, 1 Pen MUL-EITH/L 5A 5 Holders, 10 Inserts, 1 Pen, 5 Pen Clip Holders Inserts Only EITL 1 Insert Holders & Pen EITH 10 Holders, 1 Pen Order Reference Quantity Kits - Holders, Inserts, Pen & Pen Clip Holders MUL-EITH/L WEEKLY 10 Holders, 10 Inserts, 1 Pen MUL-EITH/L W 5A 5 Holders, 10 Inserts, 1 Pen, 5 Pen Clip Holders Inserts Only MUL-EITL/W 1 Insert Holders & Pen EITH 10 Holders, 1 Pen

34. Working at Height 34 Laddertag ® Laddertag in line with BS EN 131 identifies Professional or Non-professional ladder types, unique ID number and risk assesment period (not to exceed 12 months). Pre-use and In-use checks on the reverse for ease of reference. • Record unique ladder reference number, intended ladder use, risk assessment period and inspections due • Record up to 12 ladder inspection due dates • Pre-use and in-use checks • As per steps and stools on SafeTrak Holder • Dimensions: 210mm (height) x 55mm (width) • Material: Polycarbonate • Temperature Range: -20 °C to +130 °C • Attachment Method: Cable Tie, Adhesive Strip, or Screws [wooden only] Insert • Dimensions: 164mm (height) x 50mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Holder Insert Ladder Inspection Guide poster See page 49 for our useful Ladder Inspection Guide - include one with your order. Ref. WS 04 Invaluable, on-site communication and training tool providing guidance on ladders, step ladders and podium components and inspection checks. Inspection guide pocket memo provides a useful reminder on-site of key components and checks. PM6: One side contains ladder information and the other side contains podium. PM7: One side contains step ladder information and the other side contains podium. Order Reference Quantity PM 6 1 Ladder and Podium Inspection Guide PM 7 1 Step Ladder and Podium Pocket Memo Ladder, Step Ladder and Podium Inspection Guide Pocket Memo Memo • Dimensions: 208mm (height) x 85mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C PM6: Ladder and Podium Inspection Guide PM7: Step Ladder and Podium Pocket Memo Order Reference Quantity Kits - Holders, Inserts & Pen EITH/L12 10 Holders, 10 Inserts, 1 Pen Inserts Only EITL12 1 Insert Holders & Pen EITH/12 10 Holders, 1 Pen

9. Plant, Vehicles, Machinery and Tools 9 www.scafftag.co.uk Stacker-tag Stacker tagging systems provide you with all the tools you need to inspect, maintain and identify stackers, improving safety in the workplace. Ensure all important inspection information is clearly displayed in a prominent position on the stacker. Use the Stacker-tag inspection insert to help control pre-use checks, inspections, maintenance and identification. The insert contains an easy-to-follow pre-use operator checklist on the front and the facility to record up to 32 inspections on the reverse. Insert Holder • Ease of use and visibility ensures daily inspections are carried out • Remove the insert and the holder alone puts the stacker immediately into prohibition with an “Inspection Required” status • Holder is permanently attached to the stacker in a prominent position with either a cable tie, adhesive, screw or rivet PPT-tag (PPT - Powered Pallet Truck) With the new PPT-tag from Scafftag, companies can increase legal compliance, support better pallet truck checks and share inspection results on the equipment itself to improve pallet truck safety. Insert Holder Order Reference Quantity Kits - Holders, Inserts & Pen ENT-ETI STACK 10 Holders, 10 Inserts, 1 Pen ENT-ETI STACK 1A 1 Holders, 5 Inserts, 1 Pen ENT-ETI STACK 2A 2 Holders, 10 Inserts, 1 Pen ENT-ETI STACK 3A 3 Holders, 15 Inserts, 1 Pen ENT-ETI STACK 4A 4 Holders, 20 Inserts, 1 Pen ENT-ETI STACK 5A 5 Holders, 25 Inserts, 1 Pen Inserts Only ENT-ETSI STACK 1 Insert Holders & Pen ETSH-TW 10 Holders, 1 Pen Order Reference Quantity Kits - Holders, Inserts & Pen ENT-ETI-PPT 10 Holders, 10 Inserts, 1 Pen Inserts Only ETSI PPT 1 Insert Holders & Pen ETSH TW 10 Holders, 1 Pen Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C

15. Plant, Vehicles, Machinery and Tools 15 www.scafftag.co.uk Vehicle-tag Company used vehicles are working areas. As such, under the Provision and Use of Work Equipment Regulations 1998 (PUWER), it is important that company vehicles are maintained in an efficient state, good working order and in good repair. Use the Vehicle-tag inspection insert to help control pre-use checks, inspections, maintenance and identification. The insert contains an easy-to-follow pre-use operator checklist on the front and the facility to record up to 32 inspections on the reverse. Insert Holder • Help create and control pre-use inspections, maintenance and identification of vehicles • Holder and insert are very flat and are easily stored in the side pocket or glove compartment • Ease of use and visibility ensures daily inspections are carried out Van-tag Company used vans are working areas. As such, under the Provision and Use of Work Equipment Regulations 1998 (PUWER), it is important that company vehicles are maintained in an efficient state, good working order and in good repair. Use the Van-tag inspection insert to help control pre-use checks, inspections, maintenance and identification. The insert contains an easy-to-follow pre-use operator checklist on the front and the facility to record up to 32 inspections on the reverse. Insert Holder • Help create and control pre-use inspections, maintenance and identification of vehicles • Holder and insert are very flat and can easily store in the side pocket or glove compartment • Ease of use and visibility ensures daily inspections are carried out Order Reference Quantity Kits - Holders, Inserts & Pen ENT-ETI CAR 1A 1 Holder, 5 Inserts, 1 Pen Inserts Only ENT-ETSI CAR 1 Insert Holders & Pen ETSH-TW 10 Holders, 1 Pen Order Reference Quantity Kits - Holders, Inserts & Pen ENT-ETI VAN 1A 1 Holder, 5 Inserts, 1 Pen Inserts Only ENT-ETSI VAN 1 Insert Holders & Pen ETSH-TW 10 Holders, 1 Pen Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C

29. Working at Height 29 www.scafftag.co.uk Scaffold Inspection Guide Poster See page 49 for our Scaffold Inspection Guide - include one with your order. Ref. WS 01 Order Reference Text/Legend Quantity MISC 189 Do Not Remove This Tie Or Tag 50 Tie Tags MISC 190 Do Not Remove Scaffold Tie 50 Structural Tie Tag Structural Tie Test and ‘Do Not Remove’ Tags Structural Tie tags have two offers. Structural Tie Test tag for 5% of ties that are tested, and most importantly, Do Not Remove scaffold tie for use on all others. • Dimensions: 150mm (height) x 80mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Structural Tie Test Tag Records the Tie Test Date, Test Load Applied, Required Tensile Strength and a unique number for ongoing monitoring. Structural Tie ‘Do Not Remove’ Tag A prohibition tag for structural ties that have not been tested. Tie Tag: Do Not Remove This Tie Or Tag Tie Tag: Do Not Remove Scaffold Tie Barrier Tag Scaffolding Barrier specific inserts are designed to operate with Scafftag MK1 holders (page 28), helping to identity and control barriers, efficiently managing inspection procedures. Order Reference Text/Legend Quantity STSI 366 Erection and Inspection Record - For Use On Scaffold Barriers Only 1 Insert Insert • Dimensions: 208mm (height) x 85mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Scafftag Multipack Scafftag multipack contains 40 holders, 40 inserts, 10 marker pens and a re-usable dispenser box made from durable polypropylene. The dispenser allows you to store and dispense your Scafftag holders and inserts in one place minimising the risk of lost and broken tags. Holder • Dimensions: 356mm (height) x 91mm (width) • Material: Nylon • Temperature Range: -20 °C to +80 °C • Attachment Method: Hung, Cable Tie Insert • Dimensions: 208mm (height) x 85mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Order Reference Quantity Multipack - Holders, Inserts, Pen, Pen & Dispenser Box SCAF-DISPENSER BOX COMPLETE Re-usable polypropylene box with 40 x Scafftag holders, 40 x Scafftag Inserts and 10 x Marker Pens

13. Plant, Vehicles, Machinery and Tools 13 www.scafftag.co.uk Dumper Truck-tag Dumper Truck-tag increases equipment inspection efficiency whilst also improving equipment safety and compliance. Allow operatives to quickly and easily carry out their pre- use inspections and record the details at the point of use. Weatherproof, durable and clear with 32 inspection boxes. Holder Insert Excavator-tag The Excavator-tag includes best practice steps for efficient daily pre-use excavator inspections. Allow operatives to quickly and easily carry out their pre-use inspections and record the details at the point of use. Weatherproof, durable and clear with 32 inspection boxes. Holder Insert Order Reference Quantity Kits - Holders, Inserts & Pen ENT-ETI-DUMP 10 Holders, 10 Inserts, 1 Pen ENT-ETI-DUMP 1A 1 Holders, 5 Inserts, 1 Pen ENT-ETI-DUMP 2A 2 Holders, 10 Inserts, 1 Pen ENT-ETI-DUMP 3A 3 Holders, 15 Inserts, 1 Pen ENT-ETI-DUMP 4A 4 Holders, 20 Inserts, 1 Pen Inserts Only ETSI-DUMP 1 Insert Holders & Pen ETSH-TW 10 Holders, 1 Pen Order Reference Quantity Kits - Holders, Inserts & Pen ENT-ETI-EXVR 10 Holders, 10 Inserts, 1 Pen ENT-ETI-EXVR 1A 1 Holders, 5 inserts, 1 Pen ENT-ETI-EXVR 2A 2 Holders, 10 Inserts, 1 Pen ENT-ETI-EXVR 3A 3 Holders, 15 Inserts, 1 Pen ENT-ETI-EXVR 4A 4 Holders, 20 Inserts, 1 Pen Inserts Only ETSI-EXVR 1 Insert Holders & Pen ETSH-TW 10 Holders, 1 Pen Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Please turn to page 41 for Excavation-tag

20. Plant, Vehicles, Machinery and Tools 20 Nanotag™ for Machinery Nanotag for Machinery is designed to clearly display the Next Inspection Date Due/Next Test Date at the point of use. • Perfect when space is at a premium! • A selection of coloured inserts are available providing the option of additional visual qualification • NAN GP insert records the Next Test Date • NAN GPI insert records Next Inspection Date Due Insert • Dimensions: 34mm (height) x 18mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Design: Identical both sides Holder • Dimensions: 54mm (height) x 26mm (width) • Material: Nylon • Temperature Range: -20 °C to +80 °C • Attachment Method: Split Ring, Cable Tie - plastic or stainless steel available • Extra Feature: Embedded RFID chip as standard Holder Insert GP Insert Legend: Next Test Date GPI Insert Legend: Next Inspection Date Due Order Reference Text/Legend Quantity Kits - Holders, Inserts & Pen NAN-PK GP Next Test Date 20 Holders, 20 GP Inserts, 1 Pen NAN-PK GPI Next Inspection Date Due 20 Holders, 20 GPI Inserts, 1 Pen Inserts Only NAN-GP Next Test Date 1 GP Insert NAN-GPI Next Inspection Date Due 1 GPI Insert Holders, Nylon Cable Ties & Pen NANO-H Reference Number 20 Holders, 40 Cable Ties (150mm), 1 Pen Insert colours available: Blue Green Orange Purple Red White Yellow When ordering Microtag kits/inserts please quote the Order Reference followed by the colour required e.g. NAN-PK GP BLUE, NAN-PK GPI GREEN, NAN-GP RED, NAN-GPI RED etc. Ordering information Nanotag™ holder steel cable tie attachment method The attachment slots running through the middle of the holders are large enough to accommodate stainless steel cable ties (Order Ref. CABLE TIES SS). See page 50 for more details.

21. Plant, Vehicles, Machinery and Tools 21 www.scafftag.co.uk Microtag ® for Machinery Microtag for Machinery is designed to clearly display the Next Inspection Date/ Next Test Date at the point of use. • A selection of coloured inserts are available providing the option of additional visual qualification • MTI GP insert records the Next Test Date • MTI GPI insert records Next Inspection Date • A barcoded Microtag holder is also available Holder • Dimensions: 81mm (height) x 38mm (width) • Material: Nylon • Temperature Range: -20 °C to +80 °C • Attachment Method: Cable Tie (plastic/stainless steel), Adhesive Strip GP Insert Legend: Next Test Date GPI Insert Legend: Next Inspection Date Due Barcoded Holder Holder Insert Order Reference Text/Legend Quantity Kits - Holders, Inserts & Pen MIC-PK GP Next Test Date 20 Holders, 20 GP Inserts, 1 Pen MIC-PK GPI Next Inspection Date Due 20 Holders, 20 GPI Inserts, 1 Pen Inserts Only MTIGP Next Test Date 1 GP Insert MTIGPI Next Inspection Date Due 1 GPI Insert Holders, Nylon Cable Ties & Pen MIC-MTH A. Do Not Use Equipment 20 Holders, 40 Cable Ties (150mm), 1 Pen MTH/B Do Not Use Equipment 20 Bar-Code Holders, 40 Cable Ties (150mm), 1 Pen Insert • Dimensions: 47mm (height) x 30mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Design: Identical both sides Insert colours available: Blue Green Orange Purple Red White Yellow When ordering Microtag kits/inserts please quote the Order Reference followed by the colour required e.g. MIC-PK GP BLUE, MIC-PK GPI GREEN, MTIGP RED, MTIGPI ORANGE etc. Ordering information Microtag ® nylon cable tie attachment method Nylon cable ties come as standard with our Microtag holders (Order Ref. SUND-CABLE TIES). If you need to restock, or the option of stainless steel and reusable cable tie attachment methods, please visit page 50.

27. Plant, Vehicles, Machinery and Tools 27 www.scafftag.co.uk Insert Holder Soft Service Inspection Tag Soft Services Inspection Tag system provides you with all the tools you need to inspect, maintain and improve safety in the workplace. Display vital pre-use safety and instructional information for domestic equipment with this simplistic, efficient, water and chemical resistant, tagging system. 31 inspections per insert (complete month). Holder • Dimensions: 210mm (height) x 55mm (width) • Material: Polycarbonate • Temperature Range: -20 °C to +130 °C • Attachment Method: Cable Tie, Adhesive Strip Insert • Dimensions: 164mm (height) x 50mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Eyewash Station/Emergency Shower Tag Eyewash stations and Emergency Showers tagging system provide you with all the tools you need to inspect, maintain and improve safety in the workplace. We recommend a weekly check of Eyewash stations and Emergency Showers. One tag covers 12 weeks. Insert Holder Holder • Dimensions: 210mm (height) x 55mm (width) • Material: Polycarbonate • Temperature Range: -20 °C to +130 °C • Attachment Method: Cable Tie, Adhesive Strip Insert • Dimensions: 164mm (height) x 50mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Help create and control regular inspections, maintenance and identification of Eyewash stations and Emergency Showers • Ease of use and visibility ensures regular inspections are carried out • Remove the insert and the holder alone puts the asset immediately into prohibition with a “DO NOT USE THIS EQUIPMENT” status • Holder is permanently attached to the Eyewash stations and/or Emergency Showers in a prominent position with either a cable tie, adhesive, screw or rivet Order Reference Quantity Kits - Holders, Inserts & Pen MUL-EITH/L WASH 10 Holders, 10 Inserts, 1 Pen Inserts Only MUL-EITL WASH 1 Insert Holders & Pen EITH 10 Holders, 1 Pen Order Reference Quantity Kits - Holders, Inserts & Pen MUL-EITH/L DOM 10 Holders, 10 Inserts, 1 Pen Inserts Only MUL-EITL DOM 1 Insert Holders & Pen EITH 10 Holders, 1 Pen • Ease of use and visibility ensures regular inspections are carried out • Help create and control regular inspections, maintenance and identification of domestic equipment • Remove the insert and the holder alone puts the asset immediately into prohibition with a “DO NOT USE THIS EQUIPMENT” status • Holder is permanently attached to the equipmentin a prominent position with either a cable tie, adhesive, screw or rivet

41. Workspace Control 41 www.scafftag.co.uk Excavation-tag (2 Hidden Services options available) Excavation-tag enables you to increase compliance and workplace safety by communicating vital information at an excavation entrance regarding hidden services identified, who is the TWC and what PPE is required, where it can be seen by all workers. Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Visually communicate daily/weekly inspections for your excavation • Stay compliant in any weather: the durable tag will stay attached and remain legible in outdoor conditions if written on with a permanent marker • By removing the insert you immediately display the ‘Do Not Enter’ sign, helping you comply with your duty of care TempWorks-tag The TempWorks Tag (temporary works) consists of a robust insert and holder which can be attached directly to a broad variety of temporary works. On the insert, workers can immediately see when the temporary works were last inspected. See the owner of the Temporary Works, the SWL (if applicable) and the inspection data.Record the Installation Date; Temp. Works Ref; Level and Location; Installed by; Owner/Company; Temporary Works Co- ordinator; Additional comments. A single insert can record up to 21 inspections Holder • Dimensions: 260mm (height) x 153mm (width) • Material: ABS • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip, Magnetic Strip Insert • Dimensions: 193mm (height) x 144mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Increase workplace safety by sharing vital information on the temporary works itself with every worker • The durable tag will stay attached and remain legible in outdoor conditions when written on with a permanent marker • By removing the insert, you immediately identify that an inspection is required Holder Insert Holder Insert Order Reference Quantity Kits - Holders, Inserts & Pen ETI-EXCA 10 Holders, 10 Tag1 Inserts, 1 Pen ETI EXCA-A V2 10 Holders, 10 Tag2 Inserts, 1 Pen Inserts Only ETSI E 1 Tag1 Insert ETSI E V2 1 Tag2 Insert Holders & Pen ETSH 10 Holders, 1 Pen Order Reference Quantity Kits - Holders, Inserts & Pen ENT-ETI-TW 10 Holders, 10 Inserts, 1 Pen Inserts Only ETSI-TW 1 Insert Holders & Pen ETSH-TW 10 Holders, 1 Pen V2: Tag2 Insert Tag1 Insert

24. Plant, Vehicles, Machinery and Tools 24 Nanotag™ for Electrical Equipment Nanotag for Electrical Equipment is designed to clearly display the Next Test Date at the point of use. • A selection of coloured inserts are available providing the option of additional visual qualification • NAN GP insert records the Next Test Date Insert • Dimensions: 34mm (height) x 18mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Design: Identical both sides Holder • Dimensions: 54mm (height) x 26mm (width) • Material: Nylon • Temperature Range: -20 °C to +80 °C • Attachment Method: Split Ring, Cable Tie • Extra Feature: Embedded RFID chip as standard Order Reference Text/Legend Quantity Kits - Holders, Inserts & Pen NAN-PK GP Next Test Date 20 Holders, 20 GP Inserts, 1 Pen Inserts Only NAN-GP Next Test Date 1 GP Insert Holders, Nylon Cable Ties & Pen NANO-H Reference Number 20 Holders, 40 Cable Ties (150mm), 1 Pen Insert colours available: Blue Green Orange Purple Red White Yellow When ordering Nanotag kits/inserts please quote the Order Reference followed by the colour required e.g. NAN-PK GP BLUE, NAN-GP RED etc. Ordering information Holder Insert Nanotag™ holder steel cable tie attachment method The attachment slots running through the middle of the holders are large enough to accommodate stainless steel cable ties (Order Ref. CABLE TIES SS). See page 50 for more details. Thin nibbed permanent marker pens Ensure you have enough permanent marker pens to complete your inspections, when you need them. Pens supplied in boxes of 10 (Order Ref. STSM). Visit page 51 for more information.

51. Accessories 51 www.scafftag.co.uk Adhesive Strips Our double-sided adhesive strips are applied to the back of the tag holders for attachment to a flat, clean surface. Order Reference Quantity ADHPAD 10 Adhesive Pads Split Ring Attachment for Nanotag Split Rings work alongside Nanotag as an attachment option, perfect for harnesses. Order Reference Quantity NAN-RING 10 Split Ring for Nanotag Metal Fixing Clip for Man in Tank Tag Our Metal Fixing Clips are designed to attach ‘Man in Tank / Confined Space’ Tags to the Entrytag holder. Order Reference Quantity ENT-CLIP 1 Man In Tag Fixing Clip Wire Strops Ends of Wire Strop screw together to create a looped secure tie. Used for secure attachment of Visual Tags to equipment. Order Reference Quantity SUND-WIRE PH 20 20 Wire Strop Pen Clip Holder The Pen Clip Holder is unobtrusive (13mm width) and suitable for attachment to any ETSH style holder including, but not limited to, Vehicle Tags, Entrytags, Chemtags, Excavation-tags, TempWorks-tags, Fencing-tags and Hoarding-tags. The Pen Clip Holder attaches to the side of the holder to ensure you always have a suitable pen at hand while completing your inspection and maintenance checks. Pens are not included, they must be ordered separately (Order ref: STSM). The pen clip holders accommodate the Edding 141 F pen supplied as standard with certain products. Order Reference Packaging SUND-PENHOLDER 10 Pen Clip Holder Permit Wallets Permit Document Wallets provide ultimate protection and ease of viewing any documents, onsite. • UV and moisture resistant • Transparent front and back reducing the need to remove displayed documents • Accessed by zip closure (bottom to top) to ensure maximum water resistance • Available in A4 and A5 sizes Order Reference Quantity PW1 1 A4-Permit Wallets PW2 1 A5-Permit Wallets Permanent Marker Pens Thin nibbed Permanent Marker Pens to write equipment reference and inspection information on our entire range of standard and bespoke visual tags. Order Reference Quantity STSM 10 Permanent Marker Pens

23. Plant, Vehicles, Machinery and Tools 23 www.scafftag.co.uk Microtag ® for PAT Testing Scafftag.co.uk offers a tagging system for Portable Appliance Testing (PAT) to clearly display latest test date, maintenance and identification data at the point of use. Use of these tags can increase safety and communication in the workplace. • A selection of coloured inserts are available providing the option of additional visual qualification • MTI GP insert records the Next Test Date • A barcoded Microtag holder is also available Adhesive Labels for PAT Testing (packs of 50 and 250) Purpose designed status adhesive label for Portable Appliance Testing (PAT) to clearly display latest test date, maintenance and identification data at the point of use. Label • Dimensions: 30mm (height) x 47mm (width) • Design: Single sided Barcoded Holder Holder Insert Order Reference Text/Legend Quantity Kits - Holders, Inserts & Pen MIC-PK-MTI 125 Date Tested/Do Not Use After 20 Holders, 20 PAT Inserts, 1 Pen Inserts Only MTI 125 Date Tested/Do Not Use After 1 PAT Insert Holders, Nylon Cable Ties & Pen MIC-MTH A. Do Not Use Equipment 20 Holders, 40 Cable Ties (150mm), 1 Pen MTH/B Do Not Use Equipment 20 Bar-Code Holders, 40 Cable Ties (150mm), 1 Pen Order Reference Text/Legend Quantity Labels Only LAB-MTI 125 [COLOUR] PK50 Date Tested/Do Not Use After 50 Adhesive PAT Labels LAB-MTI 125 [COLOUR] PK250 Date Tested/Do Not Use After 250 Adhesive PAT Labels Insert colours available: Blue Green Orange Purple Red White Yellow When ordering Microtag for PAT kits/inserts and Labels please quote the Order Reference followed by the colour required e.g. MIC-PK-MTI 125 BLUE, LAB-MTI 125 RED PK50, LAB-MTI 125 GREEN PK250 etc. Ordering information Holder • Dimensions: 81mm (height) x 38mm (width) • Material: Nylon • Temperature Range: -20 °C to +80 °C • Attachment Method: Cable Tie, Adhesive Strip Insert • Dimensions: 47mm (height) x 30mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Design: Identical both sides

17. Plant, Vehicles, Machinery and Tools 17 www.scafftag.co.uk Nanotag™ for Lifting Equipment Nanotag for lifting equipment is designed to clearly display the SWL Next Inspection Date at the point of use. • A selection of coloured inserts are available providing the option of additional visual qualification • NAN I insert can record the SWL and Next Inspection Date Insert • Dimensions: 34mm (height) x 18mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Design: Identical both sides Holder • Dimensions: 54mm (height) x 26mm (width) • Material: Nylon • Temperature Range: -20 °C to +80 °C • Attachment Method: Split Ring, Cable Tie plastic - (supplied), metal (available pg.35) • Extra Feature: Embedded RFID chip as standard Nanotag™ holder steel cable tie attachment method The attachment slots running through the middle of the holders are large enough to accommodate stainless steel cable ties. See page 50 for more details. Holder Insert Order Reference Text/Legend Quantity Kits - Holders, Inserts & Pen NAN-PK NANI Safe Working Load, Next Inspection Date Due 20 Holders, 20 SWL Inserts, 1 Pen NAN-PK GPI Next Inspection Date Due 20 Holders, 20 Inserts, 1 Pen Inserts Only NAN-I Safe Working Load, Next Inspection Date Due 1 SWL Insert NAN-GPI Next Inspection Date Due 1 Insert Holders, Nylon Cable Ties & Pen NANO-H Reference Number 20 Holders, 40 Cable Ties (150mm), 1 Pen Insert colours available: Blue Green Orange Purple Red White Yellow When ordering Microtag kits/inserts please quote the Order Reference followed by the colour required e.g. NAN-PK NANI BLUE, NAN-PK GPI PURPLE, NAN-I RED, NAN-GPI WHITE, etc. Ordering information NAN GPI Insert Legend: Next Inspection Date Due NAN I Insert Legend: Safe Working Load, Next Inspection Date Due

45. Process & Pipelines 45 www.scafftag.co.uk Flange and Leak Test Tag Flange Tag helps control inspection, modification and maintenance throughout the flange break / inspection process. The system is three part perforated and assists the user to clearly identify the various stages of the operation from the initial break to the re-energisation of the system. Both Flange and Leak Test Tags can be supplied with unique ID numbers for enhanced control and tracking. Order Reference Quantity STSI 522 A 10 3-Part Flange Tag STSI 422 DS 10 3-Part Leak Test Tag • Dimensions: 200mm (height) x 83mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Isolation-tag Isolation Tag is designed to help control mechanical and electrical isolation procedures and prevent inadvertent re-energising of the system. Isolation Tag is a perforated tag and consists of two identical sections which are completed by the person in charge. The top half is attached to the isolation point, the bottom is removed and stapled to the Permit to Work. The isolation is lifted when the attached half is removed and re-united with the other on the Permit to Work. STSI 522A Flange Tag STSI 422DS Joint Tag Order Reference Quantity ISO 08 10 Isolation Tag • Dimensions: 200mm (height) x 83mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C Unitag ® for Valves A purpose designed insert for valve identification. A choice of different colour inserts are available providing the option of additional visual qualification. Insert • Dimensions: 41mm (diameter) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Design: Identical both sides Designed to operate alongside Unitag holders (see page 16 ). Order Reference Text/Legend Quantity Inserts Only UNI 4 Safe Working Load, Next Inspection Date Due 1 SWL Unitag Insert Holders, Strops & Pen UNH 6 Do Not Use 20 Unitag Holders, 20 Nylon Strops (150mm), 1 Pen UNH 9 A Do Not Use 20 Unitag Holders, 20 Nylon Strops (225mm), 1 Pen Insert colours available: Blue Green Orange Purple Red White Yellow When ordering Unitag for Valve inserts please quote the Order Reference followed by the colour required e.g. UNI 4 BLUE, UNI 4 RED etc. Ordering information

19. Plant, Vehicles, Machinery and Tools 19 www.scafftag.co.uk Holder • Dimensions: 50mm (diameter) • Material: Nylon • Temperature Range: -20 °C to +80 °C • Attachment Method: Strop Insert • Dimensions: 41mm (diameter) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Design: Identical both sides GP Insert Legend: Next Test Date GPI Insert Legend: Next Inspection Date Due Holder Unitag ® for Machinery Unitag for Machinery is designed to clearly display the Next Inspection Date/ Next Test Date at the point of use. • A selection of coloured inserts are available providing the option of additional visual qualification • UNI GP insert records the Next Test Date • UNI GPI insert records Next Inspection Date • Unitag holders supplied with Stainless Steel, Plastic Wire Coated Strop or Nylon attachments Insert Order Reference Text/Legend Quantity Kits - Holders, Inserts, Strops & Pen UNI-UNH-PK 6 SS UNI GP Next Test Date 20 Holders, 20 Stainless Steel Strops (225mm), 20 GP Inserts UNI-UNH-PK 6 SS UNI GPI Next Inspection Date Due 20 Holders, 20 Stainless Steel Strops (225mm), 20 GPI Inserts Inserts Only UNI GP Next Test Date 1 GP Insert UNI GP I Next Inspection Date Due 1 GPI Insert Holders, Strops & Pen UNH 6” SS STR.A Do Not Use 20 Holders, 20 Stainless Steel Strops (150mm), 1 Pen UNH 6 Do Not Use 20 Holders, 20 Nylon Strops (150mm), 1 Pen UNH 6PC-A Do Not Use 20 Holders, 20 Plastic Coated Wire Strops (150mm), 1 Pen UNH 9 A Do Not Use 20 Holders, 20 Nylon Strops (225mm), 1 Pen UNH (M) Do Not Use 20 Holders, 20 Stainless Steel Strops (225mm), 1 Pen UNH PC 9 A Do Not Use 20 Holders, 20 Plastic Coated Wire Strops (225mm), 1 Pen UNH 12 A Do Not Use 20 Holders, 20 Nylon Strops (300mm), 1 Pen Insert colours available: Blue Green Orange Purple Red White Yellow When ordering Unitag kits/inserts please quote the Order Reference followed by the colour required e.g. UNI-PK GP BLUE, UNI-PK GPI GREEN, UNI GP RED, UNI GPI YELLOW etc. Ordering information Thin nibbed permanent marker pens Ensure you have enough permanent marker pens to complete your inspections, when you need them. Pens supplied in boxes of 10 (Order Ref. STSM). Visit page 51 for more information.

26. Plant, Vehicles, Machinery and Tools 26 Insert • Dimensions: 147mm (height) x 105mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Design: Identical both sides Holder • Dimensions: 171mm (height) x 131mm (width) • Material: ABS (Acrylonitrile Butadiene Styrene) thermoplastic • Temperature Range: -5 °C to +65 °C • Attachment Method: Cable Tie, Adhesive Strip Emergency Equipment Inspection Tag The tag identifies when the emergency equipment has been used, quickly showing that an inspection of the contents is required and replacements provided. Weekly checks are recorded across Fire, First Aid and Spill. • Can be attached to a range of emergency Fire, First Aid and Spill equipment • Tag insert records inspection dates and authorised inspector signatures • Tag insert can be removed on failed equipment check, leaving a clear ‘inspection required’ message on the holder Insert Holder Nanotag™ for Fire and Emergency Equipment Nanotag for Fire and Emergency Equipment is designed to clearly display the Next Inspection Date at the point of use. • A selection of coloured inserts are available providing the option of additional visual qualification • NAN GPI insert records Next Inspection Date and equipment reference number Holder • Dimensions: 54mm (height) x 26mm (width) • Material: Nylon • Temperature Range: -20 °C to +80 °C • Attachment Method: Split Ring, Cable Tie • Extra Feature: Embedded RFID chip as standard Insert • Dimensions: 34mm (height) x 18mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Design: Identical both sides Holder Insert Order Reference Text/Legend Quantity Kits - Holders, Inserts & Pen NAN-PK GPI Next Inspection Date Due 20 Holders, 20 Inserts, 1 Pen Inserts Only NAN-GPI Next Inspection Date Due 1 Insert Holders, Nylon Cable Ties & Pen NANO-H Reference Number 20 Holders, 40 Cable Ties (150mm), 1 Pen Insert colours available: Blue Green Orange Purple Red White Yellow When ordering Nanotag kits/inserts please quote the Order Reference followed by the colour required e.g. NAN-PK GPI BLUE, NAN-GPI RED etc. Ordering information Order Reference Quantity Kits - Holders, Inserts & Pen OMN-OTSH 999 10 Holders, 10 Inserts, 1 Pen OMN-OTSH 999 1A 1 Holder, 5 Inserts, 1 Pen OMN-OTSH 999 5A 5 Holders, 25 Inserts, 1 Pen Inserts Only OMN-OTSI 999 1 Insert Holders & Pen OTH-PORT 999 10 Holders (portrait), 1 Pen

55. SafeTrak 55 www.scafftag.co.uk SafeTrak solution components A typical SafeTrak package includes: EQUIPMENT MODULES Modules determine the questions that are asked on the handheld and the reports that are generated. There are a number of standard off the shelf modules available or SafeTrak can be created to your specific requirements. Mobile handhelds are used by operators in the field to perform and record tasks such as inspections. We offer a variety of handhelds to fit your environment including rugged devices for industrial working conditions and intrinsically safe models. HANDHELDS Tags will vary depending on the style and size of equipment being tagged. Tags are equipped with RFID or Barcode technology to: • Uniquely identity assets. • Prove attendance at asset location. • Or to book an item out of stores. IDENTIFICATION TAGS The SafeTrak database holds all the records about assets and their individual histories. Various interfaces are available including administration client, booking system, web portal. DATABASE Reports and modules can be customised and branded to your business requirements. Exporting options include CSV, PDF. REPORTS Customers can define different access rights in the Safetrak user management section. Supervisor users can use all functions, while other users have specific access. USERS UPLOA D DA TA REPOR T RFID 123 456789 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 LOAD T ASKS TA SK 1 TA SK 2 TA SK 3 TA SK 4 WORKSPACE CONTROL • Asbestos Register • Excavation • Life Vest • PPE • Playground & equipment • Safety Boards • Safety Nets • Fall protection Arrest • Harnesses • Ladder • MEWP • Forklift • Lifting Equipment • Scaffold WORKING AT HEIGHT • Electrical • Fire Door • Fire Extinguisher / Fire Point • General Asset • General Tool • Heavy Plant • Safety Shower / Eyewash PLANT, VEHICLES, MACHINERY & TOOLS • Concrete Pipe • Flange • Site Audit PROCESS & PIPELINES SafeTrak inspection modules SafeTrak already includes 24 off-the-shelf inspection modules for various types of equipment: Get started with SafeTrak For more information about demos and free trials of SafeTrak apps: Tel: +44 (0)845 089 4060 Email: customer.services@scafftag.com Website: www.safetrak.com

25. Plant, Vehicles, Machinery and Tools 25 www.scafftag.co.uk Microtag ® for HAVs - Max. Daily Use Microtag for Hand Arm Vibration is designed to record exposure to vibration and noise levels and inform the operator of the equipment at the point of use. • Record Tool ID, Test Date, Vibration Magnitude, Max. Daily Use and Noise Level • A selection of coloured inserts are available providing the option of additional visual qualification Insert • Dimensions: 47mm (height) x 30mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Design: Identical both sides Holder • Dimensions: 81mm (height) x 38mm (width) • Material: Nylon • Temperature Range: -20 °C to +80 °C • Attachment Method: Cable Tie, Adhesive Strip Holder Insert Order Reference Text/Legend Quantity Kits - Holders, Inserts & Pen MIC-PK-405 Vibration - Max. Daily Use 20 Holders, 20 HAVs Inserts, 1 Pen Inserts Only MTI 405 Vibration - Max. Daily Use 1 HAVs Insert Holders, Nylon Cable Ties & Pen MIC-MTH-A Do Not Use Equipment 20 Holders, 40 Cable Ties (150mm), 1 Pen Holder • Dimensions: 81mm (height) x 38mm (width) • Material: Nylon • Temperature Range: -20 °C to +80 °C • Attachment Method: Cable Tie, Adhesive Strip Insert • Dimensions: 47mm (height) x 30mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Design: Identical both sides Microtag ® for HAVs - Vibration/Points System Microtag for Hand Arm Vibration is designed to record exposure to vibration and points per hour. • Record Tool ID, Test Date, Vibration Magnitude, Max. Daily Use, Points per Hour • A selection of coloured inserts are available providing the option of additional visual qualification Holder Insert Order Reference Text/Legend Quantity Kits - Holders, Inserts & Pen MIC-PK-451 Vibration - Points Per Hour 20 Holders, 20 HAVs Inserts, 1 Pen Inserts Only MTI 451 Vibration - Points Per Hour 1 HAVs Insert Holders, Nylon Cable Ties & Pen MIC-MTH-A Do Not Use Equipment 20 Holders, 40 Cable Ties (150mm), 1 Pen Insert colours available: Blue Green Orange Purple Red White Yellow When ordering HAVs Microtag kits/inserts please quote the Order Reference followed by the colour required e.g. MIC-PK 405 BLUE, MTI 405 GREEN, MTI 451 RED etc. Ordering information

50. Accessories 50 Tie Tag, Small and Large Flag Scafftag.co.uk offers the Tie Tag designed for Lifting Equipment ID to increase effectiveness of communication in the workplace. Order Reference Quantity 40054 SUND-RITCHEY TIE TAG Tie Tag 40049 SUND-RITCHEY SML FLAG Small Flag 40050 SUND-RITCHEY LRG FLAG (O) Large Flag Small Flag Tie Tag Large Flag Overprinting with black ink is available on request. Barcoded Cable Ties Robust and non-obtrusive, the barcoded cable ties come in packs of 50 and can increase effictiveness of communication in the workplace. Use alongside Safetak Mobil for ease of inspection and reporting (see page 54). Order Reference Quantity SUND MARKER TIE 100x2.5 1 Bar Coded Cable Tie Black Cable Ties Our Cable Ties enable secure attachment of Visual Tags to corresponding equipment. Order Reference Quantity SUND-CABLE TIES 50 Black Cable Ties Stainless Steel Cable Ties Our Stainless Steel Cable Ties offer an alternative to standard Cable Ties and enable secure attachment of Visual Tags to equipment. A perfect fit for Nanotag’s, especially on lifting equipment. Order Reference Quantity SUND-CABLE TIES SS 40 Stainless Steel Cable Ties Reusable Cable Ties Reusable cable ties enable secure attachment of Visual Tags to corresponding equipment. Available in three lengths, 100mm, 140mm and 250mm. Order Reference Quantity SUND-REL 100 100 Reusable Cable Ties - 100mm SUND-REL 140 100 Reusable Cable Ties - 140mm SUND-REL 250 100 Reusable Cable Ties - 250mm Insert colours available: Blue Green Orange Purple Red White Yellow When ordering a tag please quote the Order Reference followed by the colour e.g. 40054 SUND-RITCHEY TIE TAG BLUE Ordering information Black Brown * Tie Tag is the only tag available in Brown. Loop Tag Loop Tag Closed Loop Tag and Small Flag Combined Loop Tag Applicator Tool The Loop Tag and Applicator are ordered on request in limited quantities and colours. For more information email: customer.services@scafftag.com

36. Working at Height 36 Holder Insert Nanotag™ for Steps and Stools Nanotag for Steps and Stools, when space is minimal, is designed to clearly display the Next Inspection Date Due at the point of use. • A selection of coloured inserts are available providing the option of additional visual qualification Insert • Dimensions: 34mm (height) x 18mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Design: Identical both sides Holder • Dimensions: 54mm (height) x 26mm (width) • Material: Nylon • Temperature Range: -20 °C to +80 °C • Attachment Method: Cable Tie, Adhesive Strip • Extra Feature: Embedded RFID chip as standard for easier management and streamlined reporting of multiple assets/across locations. Order Reference Text/Legend Quantity Kits - Holders, Inserts & Pen NAN-PK GPI Next Inspection Date Due 20 Nanotag Holders, 20 Nanotag Inserts, 1 Pen Inserts Only NAN-GPI Next Inspection Date Due 1 Nanotag Insert Holders, Nylon Cable Ties & Pen NANO-H Reference Number 20 Nanotag Holders, 40 Cable Ties (150mm), 1 Pen Insert colours available: Blue Green Orange Purple Red White Yellow When ordering Nanotag kits/inserts please quote the Order Reference followed by the colour required e.g. MIC-PK GPI ORANGE, MTIGPI PURPLE, NAN-PK GPI BLUE, NAN-GPI RED etc. Ordering information Microtag ® for Steps and Stools Microtag for Steps & Stools is designed to clearly display the Next Inspection Date Due at the point of use. • Coloured inserts are available providing the option of additional visual qualification • A barcoded Microtag holder is also available • An RFID chip can be attached to the holder, for easier management and streamlined reporting of multiple assets/across locations. Insert • Dimensions: 47mm (height) x 30mm (width) • Material: Polypropylene • Temperature Range: -10 °C to +90 °C • Design: Identical both sides Holder • Dimensions: 81mm (height) x 38mm (width) • Material: Nylon • Temperature Range: -20 °C to +80 °C • Attachment Method: Cable Tie, Adhesive Strip Order Reference Text/Legend Quantity Kits - Holders, Inserts & Pen MIC-PK GPI Next Inspection Date Due 20 Holders, 20 GPI Inserts, 1 Pen Inserts Only MTIGPI Next Inspection Date Due 1 GPI Insert Holders, Nylon Cable Ties & Pen MIC-MTH A. Do Not Use Equipment 20 Holders, 40 Cable Ties (150mm), 1 Pen MTH/B Do Not Use Equipment 20 Bar-Code Holders, 40 Cable Ties (150mm), 1 Pen Holder Insert

46. Process & Pipelines 46 Process Tags Easily communicate work equipment process management and control using highly practical and eye-catching colour-coded tags. • Visualise management and control of work equipment processes • Applications include cylinders and tanks, equipment, leaks and contamination, hoses and valves • Share important safety information where it matters • Reliable, chemical resistant, and easy to apply with cable ties • Material: 0.5mm polypropylene. Order Reference Height (mm) Width (mm) PT 001 150.00 80.00 GAS CYLINDER, EMPTY, IN USE, FULL PT 002 150.00 80.00 CARBON DIOXIDE CYLINDER, EMPTY, IN USE, FULL PT 003 150.00 80.00 ACETYLENE CYLINDER, EMPTY, IN USE, FULL PT 004 150.00 80.00 ARGON CYLINDER, EMPTY, IN USE, FULL PT 005 150.00 80.00 PROPANE CYLINDER, EMPTY, IN USE, FULL PT 006 150.00 80.00 OXYGEN CYLINDER, EMPTY, IN USE, FULL PT 007 150.00 80.00 TANK TAG, EMPTY, IN USE, FULL Order Reference Height (mm) Width (mm) PT 008 150.00 80.00 OVERHAUL COMPLETED, READY FOR OVERHAUL, AWAITING CUSTOMER APPROVAL, AWAITING INSPECTION PT 009 150.00 80.00 PASSED INSPECTION PT 010 150.00 80.00 FAILED INSPECTION PT 011 150.00 80.00 HOLD PT 012 150.00 80.00 QUARANTINE PT 013 150.00 80.00 ACCEPTED PT 016 150.00 80.00 READY FOR HIRE PT 017 150.00 80.00 DO NOT HIRE Order Reference Height (mm) Width (mm) PT 018 150.00 80.00 CLIENT OWNED EQUIPMENT PT 019 150.00 80.00 OFF RENTAL PT 021 176.00 80.00 JOINT BROKEN AWARE, JOINT BORKEN AWARE, RETURN TO SUPERVISON PT 022 176.00 80.00 BREAKING OF EQUIPMENT PT 023 176.00 80.00 WITNESS JOINT PT 024 176.00 80.00 WITNESS JOINT PT 025 200.00 80.00 DISTURBED JOINT, DISTURBED JOINT, LAST TEST Order Reference Height (mm) Width (mm) PT 026 150.00 80.00 LEAK AWARE PT 027 150.00 80.00 WEEP AWARE PT 028 150.00 80.00 FREON LEAK AWARE PT 032 150.00 80.00 APPROVED TEMPORARY EQUIPMENT PT 033 245.00 80.00 TEMPORARY EQUIPMENT TAG, BACKLOAD, REGISTERED, QUARANTINED - DO NOT USE, PRE-SHIPMENT INSECTION PT 034 150.00 80.00 DO NOT REMOVE FROM WORKSITE PT 035 150.00 80.00 MOTHBALLED EQUIPMENT

47. Process & Pipelines 47 www.scafftag.co.uk Order Reference Height (mm) Width (mm) PT 020 176.00 80.00 SPADE PT 029 150.00 80.00 LEAD ID PT 030 150.00 80.00 LEAK TESTING PERSONAL ISOLATION TAG, SYSTEM VALVE OPEN, DO NOT CLOSE VALVE PT 031 150.00 80.00 LEAK TESTING PERSONAL ISOLATION TAG, BOUNDARY VALVE CLOSED, DO NOT CLOSE VALVE PT 057 150.00 80.00 EQUIPMENT CHECKED FOR NORM/LSA CONTAMINATION PT 058 150.00 80.00 CAUTION DEFECTIVE EQUIPMENT Order Reference Height (mm) Width (mm) PT 014 299.00 60.00 DO NOT HIRE PT 015 299.00 60.00 READY FOR HIRE Order Reference Height (mm) Width (mm) PT 036 150.00 80.00 RENTAL EQUIPMENT, RETURN PROMPTLY PT 037 150.00 80.00 VENDOR OWNED EQUIPMENT PT 038 150.00 80.00 RENTAL EQUIPMENT PT 039 150.00 80.00 REPORTED FAULT PT 040 150.00 80.00 SHUTDOWN PT 041 150.00 80.00 THIS HOSE IS IN USE BY: OPERATIONS PT 042 150.00 80.00 THIS HOSE IS IN USE BY: SERVICES/CONSTRUCTION PT 043 260.00 80.00 THIS HOSE IS IN USE BY: SERVICES/CONSTRUCTION Order Reference Height (mm) Width (mm) PT 048 150.00 80.00 OPEN PT 049 150.00 80.00 CLOSED PT 050 150.00 80.00 DO NOT OPERATE, DO NOT OPERATE PT 051 150.00 80.00 SHUTDOWN ISOLATION PT 052 150.00 80.00 LSA CONTAMINATED PT 053 150.00 80.00 LSA FREE PT 054 150.00 80.00 NORM CONTAMINATED PT 055 150.00 80.00 NORM FREE PT 056 161.00 80.00 NORM CONTAMINATED Order Reference Diameter (mm) PT 044 41.00 CRITICAL VALVE LOCKED OPEN PT 045 41.00 CRITICAL VALVE LOCKED CLOSED PT 046 41.00 VALVE LOCKED OPEN PT 047 41.00 VALVE LOCKED CLOSED