Junior A Vl

5.

6.

7.

8.

9.

10.

11.

12.

13. E.C. Declaration of Conformity The manufacturer or its legal representative supplier in the European Community: Honeywell Safety Products Europe Declares that the Personal Protective Equipment described here after conforms to the provisions of the European Council Directive 89/686/CEE: Designation: JUNIOR A VL Reference: A114106 Standard(s): EN 12941:1998 This PPE is the object of the below EC examination certificate n°: 7338 A/12/37 PSA Delivered by: Drawn up in , on the 15/06/2018 By : Division : Respiratory Protection Zl Paris Nord II 33, rue des Vanesses BP 50288 95958 Roissy CDG France Tel: +33 (0) 49 90 79 79 Fax: +33 (0)1 49 90 79 80 www.honeywellsafety.com

4. 5 A161019 Frontal protection 6 A160128 Face seal 7 A160213 Headband with air duct 8 A160251 Disposable hood (x10) 9 A160219 Yellow protective cape (PU) 10 A161472 Sweatband Spare Parts File Junior A Vl technical View EAN Code 8713223156967 Packaging Specs Individual Box 25x32,5x30 Unit of Measure cm Quantity per Box/Pack/Case 1 Quantity per Carton 4 Packaging © Honeywell International Inc. JUNIOR A VL (airhood for PAPR use) Page 4 Of 4 © Honeywell International Inc.

2. the main hood visor against damage and/or splashes. The full face seal ensures a protective overpressure all around the face and an optional cape can be used to protect the upper and back part of the head and neck. Mask Material Visor, brow guard and chin guard in Cellulose acetate / Clamps in stainless steel / Face seal in cotton Technical Description E.C. Declaration of Conformity EC Category PPE 3 EC Certificate Number 7338 A/12/37 PSA EC Attestation CA200 CE Certificate EC Attestation Number 7338 A/12/37 PSA Certifications EN 12941 Certifications DOC3188_Compact Air 200 Series_UK http://www.honeywellsafety.com/supplementary/documents_and_downloads/respiratory_protection /papr/4294974975/1033.aspx Literature & Documents User Manual User manual Additional Information Storage Information The airhoods must be stored in a clean, dry environment away from any contaminants, dust and direct sunlight. It must be stored in its original box, any carrying case, or in an enclosed wall case. Care Instructions Controls before use Ensure that the system, after being last used, has been cleaned in the correct manner, disinfected end checked in accordance with manufacturer instructions inside user manual. Donning the Junior A Hood Connect the supply hose from the powered air purifying respirator (Airbelt, Compact Air or Compact Air 200) to the rear of the air hood. Buckle the belt round the body and switch on the respirator. Maintenance JUNIOR A VL (airhood for PAPR use) Page 2 Of 4 © Honeywell International Inc.

1. Europe / Africa Automotive and Part Manufacturer Building and Construction Chemical Industries General Industry Maintenance Reference Number A114106 Product Type Respiratory Protection Range Powered Air Purifying Respirators Line PAPR with Hoods or Visors Brand Honeywell Brand formerly known as NORTH Industry Product Use Paint spraying Light chemical handlings Overview Feature Great comfort and fitting Benefit Clear acetate visors for additional light inside the hood which procures excellent field of vision. The device is equipped with soft, elastic and washable face seal and an unique system of spring loaded clamps for disposable visors. Feature Security Benefit Wide field of vision thanks to the size and to disposable visor-system allowing removal during operations and protecting Features & Benefits JUNIOR A VL PRODUCT NUMBER: A114106 JUNIOR A VL is part of the Honeywell light duty airhoods range designed for use with powered air purifying respirator (PAPR) as Compact Air 200, Compact Air or Airbelt. This model is fully transparent and it can be equipped with a cape for increase protection. It is recommended in working area where protection is required for respiratory organs, face and head against harmful particles, mists, gasses and vapours. This system procures air to the user via the supply hose connected between PAPR ( equipped with filters ) and the hood. The filtered airflow enters at the rear and flows through the airduct and leaves the hood via the face collar Page 1 Of 4 © Honeywell International Inc.

3. Fit the air hood on the head, tighten the belt and draw the face seal under the chin Cleaning After each session clean the air hood, using a mixture of water and a mild solution (ref. 1779065 EPI U-S) Subsequently, rinse thoroughly with clean water. (Do not use any solvents). Using a disinfectant, clean the inner surfaces of the air hood . Using a dry cloth, dry all the metal components, so avoiding corrosion Accessories For use with Junior A VL TYPE DESCRIPTION REFERENCES BLOWER Compact Air®200 Blower unit, rechargeable battery, battery charger, belt with back plate, breathing hose for hoods, airflow indicator and plastic carrying case A150401 Compact Air® Blower unit for particles, gasses and vapours - rechargeable NiMH battery - support belt -P3 filter - hose and plastic carrying case A150102 Airbelt Blower unit for particles including an electronic warning device for filter or low battery - with rechargeable NiMH battery - charger - support belt - P3 filter and hose and plastic carrying case A150050 ALUMINUM FILTERS P3 A168091 A2P3 1783010 AB2P3 1783040 ABEK2P3 1784000 ABEKHgP3 1785019 PLASTIC FILTER P3 1786000 Spare Parts numbers Part number Description 1 A160734 Disposable visor (Qty 100/pack) 2 A160733 Visor, cellulose acetate 3 A160669 Pliers visors (by pair) 4 A161014 Chin Parts & Accessories JUNIOR A VL (airhood for PAPR use) Page 3 Of 4 © Honeywell International Inc.

15. Compact Air ® 200 Series PAP r u tilizes a triple alarm system (audible, visual and vibration). w hen 10% of the battery life remains the alarm system will alert the user, which will increase to a continuous audible alarm at 5%. An alarm will also be triggered when filters (P3 filter components) are blocked or clogged. I The audible alarm is located near the breathing tubes, allowing the alarm sound to be heard, even in noisy environments. I In addition, a vibrating alarm is activated, which can even be felt through thick clothing, thus ensuring that workers who are hearing impaired or are working in extremely noisy environments will be alerted to a low battery or clogged filters (P3 filter components). I Finally, the third alarm is an LED light which will let the worker know if the battery is low or if the P3 filter components need changing. Three conditions are monitored for alarm: The Compact Air ® 200 Series PAP r is easy to use. It includes multiple alarms, giving you the heads up you need to work as long as possible without having to guess when the battery will need recharging or your filters need changing. Increased Safety Flexibility www.honeywellsafety.com www.honeywellsafety.com www.honeywellsafety.com ALARM C o NDITI o N A u DIBLE ALARM VIBRAT o RY ALARM VIS u AL ALARM 10% battery life remaining Four beeps for every 30 seconds Vibration for four seconds at 30 second intervals CHECK BATTERY LED light will change from green to red 5% battery life remaining Continuous beeps until battery expires - CHECK BATTERY LED light remains red Blocked or clogged filters (P3 filter components) Continuous beeps Vibration for three seconds at 10 second intervals CHECK FILTER LED light will change from green to red l ightweight lithium-ion battery I The lightweight battery provides improved comfort for longer wear. I The “zero-memory” feature allows the end-user to use the battery without draining it before recharging. I The battery provides a minimum of eight hours service life depending on the type of filter and particulate concentration. Airflow automatically adjusts to meet EN requirements I Whatever the level of filter saturation or battery charge is, you will always have the right flow of air. This is maintained electronically at a constant flow rate of 170 L/PM. Other PAPR without sensor adjustment can lose air flow as filters load. The smart charger recharges in approximately eight hours and cannot over charge I You can safely leave your battery on charge overnight, or for the weekend - it will not be damaged in any way. Comfort and Performance *EN certification pending. (1) The choice between two references of filters depends on the country of manufacturing. Pharmaceutical industry Laboratory Automotive Industry Welding FILTERS CERTIFIED WITH C o MPACT AIR ® 200 *(1) HEADPIECES P3 A2P3 R SL AB2P3 R SL ABEK2P3 R SL ABEK2HgP3 R SL 1786000 or A168091 1783010 or A168099* 1783040 or A168103* 1784000 or A168104* 1785019 or A168112* H oo DS & WELDING HELMETS PRIMAIR - vl P/N A114110 TH2 TH2 TH2 TH2 _ K o LIBRI - vl P/N A114102 TH1 TH1 TH1 TH1 _ J u NI o R A - vl P/N A114106 TH1 TH1 TH1 TH1 _ J u NI o R A C ombi - vl P/N A114300 * * * * _ J u NI o R B - vl P/N A114400 J u NI o R B C ombi - vl (PU) P/N A114200 J u NI o R B C ombi - vl (Neoprene) P/N A114201 TH3 TH3 TH3 TH3 TH3 PRIMAIR PL u S - vl P/N PA111EU PRIMAIR PL u S - vl P/N PA121EU TH3 TH3 TH3 TH3 TH3 E u R o MASKI - vl P/N A114703 TH2 TH2 TH2 TH2 _ TIGERH oo D 90X110 - vl P/N A114725 * * * * _ TIGERH oo D 50X108 - vl P/N A114728 * * * * _ PRIMAIR FM E o 1 P/N PA231EO1 * * * * _ MASKS N5400 P/N N65754201, P/N N65754301 * * * * _ PAN o RAMAS qu E P/N 1710394 * * * * _ o PTIFIT P/N 1715011, P/N 1715021 * * * * * HALF MASK N7700 P/N N65770015, P/N N65770016 * * * * _ In-use status Alarm triggered One unit for masks, loose fitting hoods or welding helmets I The Compact Air ® 200 accommodates the preferences of different workers. It offers flexibility for contractors and multi-site locations with varying job needs. w ide range of hoods and face pieces (16 models) I The hoods, welding helmets and masks can be used for a large range of working environments (welding, chemical, automotive, etc). Choice of nylon or PVC decontamination belt and comfort pad I The lightweight nylon belt offers maximum comfort. Whereas the PVC belt and comfort pad are used where easy and reliable decontamination is critical. Automotive applications: not for use with isocyanate based paints

14. DOC3188 05/2013 © 2013 Honeywell International Inc. SPECIFICATION Bl O w E r u NIT lIT h I um- ION BATTE ry PAC k AN d h O u SIN g Type Impact resistant ABS Type Lithium-ion rechargeable Filters 3xEN 148-1 threaded connection Voltage 7.2v Air hose length 840mm Option 970mm Operating time 8-13 hours Connection EN148-1 bayonet/threaded connection Charging time 8 hours w eight 410g h ousing Impact resistant ABS d imensions 145 x 112 x 93mm w eight 510 g d imensions 105 x 80 x 78mm uNIVE r SA l BATTE ry C h A rg E r C A rry IN g CASE w IT h m O uld E d FOA m l ININ g Type Fully automatic m aterial Polypropylene Primary voltage 110-220V/50-60Hz d imensions 380 x 330 x 132mm Secondary voltage 4.8v/7.2v w eight 270g d imensions 108 x 67 x 36mm TEC h NICA l d ATAS Approvals EN12941 (TH1-TH2-TH3) / EN12942* (TM2-TM3) / CE 0194 Type of filters/protection Particulates only and combined particulates, gas & vapour w eight of the apparatus (without filters and breathing tube) 1,05kg Air flow Minimum 170 l/min, automatic adjustment to meet EN require ments m aximum humidity < 80% In-use and storage temperature range -10°C / +50°C r echarging temperature (battery) 0°C / +30°C Lead them to safety - Build an enduring culture of safety through comprehensive education, innovative technologies, and comfortable, high-performance products. Honeywell Safety Products is the ideal partner for a cultural transformation that inspires workers to make safer choi ces on their own. 1 Select your Compact Air ® 200 kit h ood and welding helmets version - A150401 - Compact Air ® 200 Bayonet kit: blower unit, lithium-ion battery pack and housing, universal battery charger, belt with comfort pad, breathing tube for hoods (840mm length), air flow indicator and carrying case with moulded foam lining. m ask version - A150400 - Compact Air ® 200 d in thread kit*: blower unit, lithium-ion battery pack and housing, universal battery charger, belt with comfort pad, breathing tube for masks (970mm length), air flow indicator and carrying case with moulded foam lining. 2 Select your facepiece h ood w elding helmet m ask For your choice of hood, welding helmet and mask refer to the configuration table included in this document. 3 Select your filter FILTERS CERTIFIED F o R u SE WITH C o MPACT AIR ® 200 P3 A2P3 R SL AB2P3 R SL ABEK2P3 R SL ABEK2HgP3 R SL 1786000 or A168091 1783010 or A168099* 1783040 or A168103* 1784000 or A168104* 1785019 or A168112* Please refer to the configuration table included in this document. 4 Select your spare parts and optional accessories A160712 Sealing rings - 10 pcs A161370 Breathing tube for bayonet kit, 840mm length CA222E u Lithium-ion battery pack and housing A161356 Breathing tube for bayonet kit, 970mm length CA231E u Universal battery charger A161378 Breathing tube, DIN* A160696 Belt and comfort pad A160531 Air Flow indicator A160723 Comfort pad A160368 Carrying case with moulded foam lining A160684 PVC decontamination belt A161301-10 Hose cover Tyvek ® -10 pcs A160727 PVC decontamination comfort pad One unit does it all! h ow to order your Compact Air ® 200 kit? Compact Air ® 200 Series - a simplified equipment selection process: To purchase a complete PAP r system you only have to choose three parts: one kit (to be used with hoods/welding helmets or masks), the headpiece and the filters. Optional spare parts and accessories are available if needed, such as longer air hoses, special belts for easy decontamination. The Compact Air ® 200 complete system includes: Blower unit, lithium-ion battery pack and housing, universal battery charger, belt with comfort pad, breathing tube, air flow indicator and carrying case with moulded foam lining. www.honeywellsafety.com hONE yw E ll S AFET y Pr O du CTS hONE yw E ll S AFET y Pr O du CTS Eur OPE SAS Immeuble Edison Paris Nord 2 33 rue des Vanesses - CS 55288 Villepinte 95958 Roissy CDG Cedex - France Tél : +33 (0)1 49 90 79 79 Fax : +33 (0)1 49 90 71 04 Email: info-export.hsp@honeywell.com S PE r IAN Pr OTECTION ( uk ) lI m ITE d Unit 3 Elmwood, Chineham Park, Basingstoke, RG24 8WG Phone: +44 (0) 1256 693 200 Fax: +44 (0) 1256 693 300 Email: info-uk.hsp@honeywell.com www.honeywellsafety.com Compact Air ® 200 Series PAP r “No Worry, No Guesswork” SAFETY, COMFORT, FLEXIBILITY Powered Air Purifying r espirator (PAP r ) *EN certification pending. *EN certification pending. For all the undated standards mentioned, please refer to the latest version.