tube-pump-accuro-pi-9107402-en-us

7. Notes Dräger accuro | 07

5. Related Products Dräger accuro | 05 D-12091-2010 Dräger X-act ® 5000 Basic The automatic tube pump Dräger X-act ® 5000 Basic is the all-in-one solution designed for measurements with Dräger short-term tubes and for sampling tubes and systems. Ease of operation and a high degree of reliability compliment the measurement and sampling of gases, vapors and aerosols.

2. Benefits 02 | Dräger accuro Mobile spot measurement This manual pump is used for spot measurements such as the detection of concentration peaks, confined space entry, worst-case scenarios etc. Functional bellows pump The Dräger-Tube pump accuro draws in 100 ml per stroke. When measuring, the pump body (bellows) is pressed together completely. The exhaust valve is closed during the opening phase of the bellows so that the gas sample flows through the connected Dräger-Tube into the pump. After the complete opening of the pump body into its original position the suction process is finished. The end of stroke is visible by a pressure- controlled end of stroke indication, located in the pump head. Sampling During the sampling process the substances to be evaluated are firstly accumulated on a suitable carrier material, e.g. activated charcoal, silica gel and so on. The air to be evaluated is thereby drawn over the respective material - with a predefined flow rate and duration. Afterwards, the substances that have accumulated on the carrier material through adsorption or chemisorption are examined qualitatively and quantitatively in the laboratory using instrumental analysis such as gas chromatography. One-handed operation Frequently, measurements need to take place under extreme conditions, e.g. on ladders, in shafts or when wearing heavy breathing protection. The Dräger-Tube pump accuro can easily be operated with one hand and enables a reliable measurement also in difficult-to-access places.

8. Notes 08 | Dräger accuro Not all products, features, or services are for sale in all countries. Mentioned Trademarks are only registered in certain countries and not necessarily in the country in which this material is released. Go to www.draeger.com/trademarks to find the current status. CORPORATE HEADQUARTERS Drägerwerk AG & Co. KGaA Moislinger Allee 53–55 23558 Lübeck, Germany www.draeger.com USA Draeger, Inc. 7256 S. Sam Houston Parkway W., Suite 100 Houston, TX 77085 1 800 4DRAGER (1 800 437 2437) . CANADA Draeger Safety Canada, Ltd. 2425 Skymark Ave., Unit 1 Mississauga, Ontario L4W 4Y6 1 877 DRAGER1 (1 877 372 4371) . Locate your Regional Sales Representative at: www.draeger.com/contact 91 07 402 | 20.11-1 | HQ | PP | Subject to modifications | © 2020 Drägerwerk AG & Co. KGaA

3. System Components Dräger accuro | 03 ST-36-2001 Dräger-tubes ® for short-term measurements The Draeger short-term detector tubes have proven to be a very cost- effective and reliable way to measure toxic gases and vapors in the workplace. 2-925-91 Dräger sampling tubes and systems High precision guaranteed: The Dräger sampling tubes and systems are very reliable in use even with complex compounds and mixtures of substances. Accessories ST-1990-2005 Dräger TO 7000 Using the tube opener Dräger TO 7000, conventional Short-Term Tubes as well as Ampoule and Double Tubes can be opened safety with few jagged edges left behind.

4. Accessories 04 | Dräger accuro ST-14319-2008 Dräger accuro extension hoses For use in hard-to-access locations such as shafts. Available in the following sizes: ‒ 1 m ‒ 3 m ‒ 10 m ‒ 15 m D-13066-2010 Hot air probe Enables the measurement of extremely hot gases, e.g. in combustion plants (up to 650 °C). D-13067-2010 Vehicle exhaust probe For measuring exhaust gases from internal combustion engines. D-13069-2010 Bar probe 400 Is used for clearance measurements in containers, e.g. intermodal shipping containers.

1. Dräger accuro Pump for Gas Detection Tubes Fast measurement with one hand: The Dräger-Tube pump accuro allows you to use the established Dräger-Tubes to take measurements under extreme conditions. The easy-to-use Dräger-Tubes have already been calibrated and form a perfect unit with the Dräger-Tube pump. ST-2436-2003 Integrated end of stroke indicator Clear indication when a stroke is ended Hard-wearing EPDM rubber housing Robust rubber mixture for reliable operation Integrated tube opener Simple scorin of the tubes usin a ceramic blade for clean openin Integrated stroke counter or eas monitorin of the number of strokes made Pump bellows recise olumes for a lon period of time Scissor-spring mechanism or a uniform compression of the pump bellows with one hand

6. Technical Data 06 | Dräger accuro Dimensions (W x H x D) 170 x 45 x 85 mm (6.7 x 1.8 x 3.3 in) Stroke volume 100 ±5 cm 3 Weight 250 g 8.8 oz Ambient conditions Temperature: -20 °C to +50 °C (-4 °F to +122 °F) Relative humidity: 0 – 95 % non-condensing CE-certified (EN 0158) ATEX I M1 II 1GD IIB 85°C T6 II 2G IIC T6 -20 °C ≤ Ta ≤ +50 °C Approvals DIN EN ISO 17621 Ordering Information Description Content Order no. Dräger accuro Gas detector pump Dräger accuro and tube opener Dräger TO 7000 64 00 000 Soft-Side accuro kit accuro pump, tube opener, spare parts, allen tool, and nylon case 83 17 186 Hard-Side accuro kit accuro pump, tube opener, spare parts, allen tool, rubber caps and molded case 40 56 443 Spare parts kit for Dräger accuro 6 x valve disc, 1 x window, 3 x membrane, 1 x insert and 1 x grommet 64 00 220 Extension hose 1 m Incl. adapter for Simultaneous Test Set 64 00 561 Extension hose 3 m Incl. adapter for tubes and adapter for hose in a carrying box 64 00 077 Extension hose 10 m Incl. adapter for tubes and adapter for hose 64 00 078 Extension hose 15 m Incl. adapter for tubes and adapter for hose 64 00 079 Tube opener Dräger TO 7000 64 01 200 Adapter for Dräger simultaneous test set Incl. cutting holder and adapter 64 00 090 Additional accessories upon request.