3M_PSD_PF600_Datasheet_EN_GB

3. Ordering information Accesories for 3M ™ Powered Air Turbo PF-600E Part number Legacy Part Number Description PF-630 5064043 Spare 9.6V/4.5Ah battery (for use with 3M ™ Powered Air Turbo PF-600E) PF-931 2027037 Bayonet to Din Breathing Tube Adapter SS-629 5063596 Belt Harness for SS-625 Belt SS-625 5062786 Standard belt PF-651 5064517 Disposable protective cover PF-653 2023305 Shower plugs SS-626 5063597 Comfort Belt PF-641E 5063791 Battery Charger Technical specifications Approvals CE Certified to EN 12941 (TH2/TH3) and EN 12942 (TM2/TM3) MMDF (manufacturer’s minimum design flow rate) 160l/min with automatic adjustment Battery type NiMH rechargeable, 9.6V/4.5Ah high performance battery. Internal overcurrent and temperature protection. Size 134x34x34mm Weight: 502g. Battery operating time 4-8 hours depending upon headtop/facemask/filter combination Battery charger Mains operated: Prim: 100-240V AC, 50-60Hz 14VA. Sec: 4.8/9.6V DC. Max. 700mA 6.72VA. Size: 90x60x38mm. Alarms Visual display of battery status (A), particulate filter status (P). Warning buzzer of low battery status. Approx. 15 minutes running time remaining. User interface Power status, battery and alarm status. Weight of the turbo unit without filters 1.6kg Operating temperature range -10°C to +30°C Ingress protection rating IP65 (suitable for cleaning by showering/water spray) with filters/decontamination plugs fitted filter ports and breathing tube/breathing tube port plug fitted. Do not submerge. Material data Blower body Polyurethane Screw Ring ABS Body tensioner TPE, ‘Hytrel’ Inhalation valve body PA Polyamide Gasket TPE Pump unit PA Polyamide 3M ™ Powered Air Turbo PF-600E (Proflow 2 SC 160)

5. Maintenance Only certified technicians can perform maintenance on the 3M ™ Powered Air Turbo PF-600E. Regular and scheduled maintenance is essential for safe use of the equipment. In addition to pre-use and storage checks, check the apparatus on a monthly basis, and replace any defective parts. A qualified service and maintenance operator must perform a service on an annual basis. A regular monthly maintenance schedule is performed as per the pre-use checks that includes a thorough visual inspection of all components. Perform a thorough inspection of all component parts before and after each use. Cleaning IP65 (suitable for cleaning by showering/water spray) with filters/decontamination plugs fitted filter ports and breathing tube/breathing tube port plug fitted. Do not submerge. Once cleaned, all components must be left to dry naturally. Storage Ensure that the 3M ™ Powered Air Turbo PF-600E is protected from damage during transport. When not in use, store the equipment in a clean, dry environment, away from direct heat sources between -10°C and +50°C, at a humidity of less than 75% RH. Disposal Dispose the equipment in accordance with local regulatory requirements. Personal Safety Division Pimbo Road, Skelmersdale Lancashire, WN8 9RA Tel.: +44 (0) 1695 711711 www.3MScott.com Personal Safety Division 3M UK plc 3M Centre Cain Road, Bracknell Berkshire RG12 8HT Tel.: 0870 60 800 60 www.3M.co.uk/safety Please recycle. Printed in the UK. 3M and Proflow are trademarks of 3M Company. © 3M 2020. All rights reserved. OMG77306 Seek medical advice immediately if a cell or battery is swallowed. In the event of a battery leaking, do not allow liquid to come into contact with the skin or eyes. If contact has been made, use water to wash the affected area thoroughly and seek medical advice. Use the battery only for the application for which it is intended. Do not short-circuit batteries. Do not dismantle, open or shred batteries. Do not subject batteries to mechanical shock. Do not expose batteries to heat or fire. Avoid storage in direct sunlight. Never recharge in a potentially explosive environment. Storing a battery that has depleted can damage the battery. Do not charge the battery with any other charger except that which is specifically provided for use with the equipment. Charge the battery only within the temperature range of 0°C to 40°C. Do not store batteries haphazardly where they may short-circuit each other or be short-circuited by conductive materials. The charger is suitable only for indoor use. Use only an approved power supply. Do not attempt to charge non-rechargeable batteries. Do not leave a battery on prolonged charge when not in use. PF-630 battery pack and PF-641E charger warnings This information also relates to any secondary battery that you may use. 3M ™ Powered Air Turbo PF-600E (Proflow 2 SC 160) 3M Ireland Limited The Iveagh Building, The Park Carrickmines Dublin 18 1 800 320 500

1. Description The 3M ™ Powered Air Turbo PF-600E (Proflow 2 SC 160) is a belt - mounted air purifying device. It can be combined with an approved headtop or facepiece to form a power - assisted system for respiratory protection against particles, nuisance odours (where applicable) and gases and vapours. A range of approved breathing tubes are available depending on which headtop or facepiece is selected. Turbo Unit The turbo unit contains a DC motor powered radial fan running at a specified rpm, variable according to the filter/headtop combination. A microprocessor calculates the power required to maintain the set flow rate and automatically adjusts the flow rate. If the flow rate falls below the minimum 160l/min, an audible warning sounds. An electronic limiter for motor rotation speed protects the motor from excessive wear during long-term use. The supplied units are calibrated. Battery A NiMH rechargeable battery is safely enclosed within the casing. Batteries are 4/3 A size NiMH, 8 cells providing 9.6V/4.5Ah. The service life of the battery is extended by electronic control of recharging. Optimum performance of new batteries are obtained after three full charging cycles. The battery operating time is 4-8 hours * , depending on the filter/headtop combination, satisfying the minimum 4h run time of the EN 12941:1998+A2:2008 and EN 12942:1998+A2:2008 Standards. The battery includes an internal overcurrent protection and temperature protection. * Operating times are based on a fresh battery, appropriately charged with new filters being used at room temperature and moderate work rates. Extremes of temperature, the age and cycle of the battery, charge status, filter clogging, and high work rates may negatively impact operating time. If the application is sensitive to operating time it is recommended that the end user consults 3M to determine which type of battery should be used. Charger The microprocessor-controlled charger features an automatic recharging system including signal lights. The signal lamp on the charger indicates charging status. System Classifications and Protection Factors The information in the table below depends on the headtop or facemask used. Refer to specific datasheet for headtop or facemask for more information. EN 12941:1998 + A2:2008 EN 12942:1998 + A2:2008 Classification TH2 TH3 TM2 TM3 APF 20 40 20 40 For further information on Assigned Protection Factors (APFs) see HSE document HGS53 or alternatively contact 3M. Po wered air respirator user interface An automatic monitoring feature checks that the unit is operating correctly, warns the user of low battery and compensates for changes in air flow in addition to ensuring correct air flow. A self-diagnostic test on start-up shows the current status of the respirator on the digital user interface. Technical datasheet 3M ™ Powered Air Turbo PF-600E (Proflow 2 SC 160)

2. Ordering information 3M ™ Powered Air Turbo PF-600 Series Starter Kits and Ready Kits Part number Description* PF-619E 3M ™ Powered Air Turbo Starter Kit PF-619E including 3M ™ Powered Air Turbo, PF-602E, PF-630 Battery, PF-641E Battery Charger and SS-626 Comfort Belt PF-600E LIK The 3M ™ Powered Air Turbo Light Industry Ready Kit PF-602E LIK includes a 3M ™ Powered Air Turbo PF-602E, PF-630 Spare Battery, PF-641E Battery Charger, M-206 Faceshield, SS-626 Comfort Belt, DT-1135E PF10 P Filter, SS-BT-44 Heavy Duty EPDM Breathing Tube and ADP-03 Breathing Tube Adaptor * See tables below for original part numbers for specific components Breathing Tubes approved with 3M ™ Powered Air Turbo PF-600E * Part number Legacy Scott Part Number Description SS-BT-23 2026226 Fixed Length Breathing Tube ** SS-BT-44 5564453 Heavy Duty Breathing Tube ** SS-BT-55 5564454 Heavy Duty Breathing Tube for Tight Fitting Facepieces * See headtop and facepiece datsheets for more information on approved breathing tubes ** May require use of ADP-03 breathing tube adaptor 3M ™ DT-Series ™ filter options approved with 3M ™ Powered Air Turbo PF-600E Note: Filters previously from the Scott Pro2000 range Colour code Part number Description Protection For use against DT-1135E 3M ™ Particulate Filter PF10 P3 R D DT-1135E P R SL Solid and liquid hazardous particles, e.g. radioactive and toxic substances and micro-organisms. DT-1235E 3M ™ Particulate Filter PFR10 P3 R D DT-1235E (reduced opening) P R SL Solid and liquid hazardous particles, e.g. radioactive and toxic substances and micro-organisms. DT-4031E 3M ™ Combination Filter CF22 A2P3 R D DT-4031E A1P R SL Organic gases and vapours, e.g. solvents with a boiling point above 65ºC, solid and liquid hazardous particles, e.g. radioactive and toxic substances and micro-organisms. DT-4032E 3M ™ Combination Filter CF22 B2P3 R DT-4032E B2P R SL Inorganic gases and vapours, solid and liquid hazardous particles, e.g. radioactive and toxic substances and micro-organisms. DT-4035E 3M ™ Combination Filter Cartridge CF22 A2B2P3 R D DT-4035E A1B2P R SL Organic, inorganic gases and vapours, solid and liquid hazardous particles, e.g. radioactive and toxic substances and micro-organisms. DT-4036E 3M ™ Combination Filter CF22 A2B2E1P3 R D DT-4036E A1B2E1P R SL Organic, inorganic and acid gases and vapours, solid and liquid hazardous particles, e.g. radioactive and toxic substances and micro-organisms. DT-4045E 3M ™ Combination Filter CF32 A2B2E2K2P3 R D DT-4045E A1B2E2K2P R SL Organic, inorganic and acid gases and vapours as well as ammonia and organic ammonia derivatives, solid and liquid hazardous particles, e.g. radioactive and toxic substances and micro-organisms. DT-4046E 3M ™ Combination Filter CF32 A2B2E2K2HgP3 R D DT-4046E A1B2E2K2HgP R SL Organic, inorganic and acid gases and vapours as well as ammonia and organic ammonia derivatives, mercury and mercury compounds, solid and liquid hazardous particles, e.g. radioactive and toxic substances and micro-organisms. A1 gas classification on relevant DT-Series filter. Hg filters only approved with TH3 and TM3 systems. DT-4031E, DT-4032E, DT-4035E, DT-4045E, DT-4036E and DT-4046E are not approved for use with the 3M ™ Powered Air Turbo PF-600E connected to 3M ™ Vision ™ Full Facepiece Resusable Respirator FM4. 3M ™ Powered Air Turbo PF-600E (Proflow 2 SC 160)

4. P-Indicates particulate filter status The powered air turbo power required depends on the combination of facemask and filters being utilised. The P-Value on the turbo unit shows how hard the unit is working to achieve the 160l/min flow rate. The lower the P-Value, the harder the unit is working to achieve the required flow rate. During the first usages, the value is usually P8 or P7 as the turbo is easily reaching 160l/min flow rate (in combination with full face masks between P7 and P3). A lower reading indicates that the turbo is using more power to achieve an adequate air flow. An alarm will sound when the unit displays P0, indicating the resistance of the motor is too high. Particulate filter replacement is recommended when P1 is shown. At P1, the flow rate of 160l/min is still achieved. Data-logging and service The 3M ™ Powered Air Turbo PF-600E incorporates a data-logging function which automatically records information about usage and performance of the blower unit. The PF-600 Series Service Tool 2.1 Software is available to approved service centres for tracking the history of each individual power pack. The service tool software handles the diagnostics unit. The powered air turbo is plugged into the computer with a cable without the need to open the unit. Please note that only the serial number is stored in the device memory. Ŕ It maintains warranty status in hours (warranty 1,800 hours or one year, whichever comes first) Ŕ Provide error information Ŕ Maintain loading data Ŕ Track filter resistance to assist in change - out schedules Ŕ Provide historical maintenance log Please contact your approved service centre for further information. A-Indicates battery status When A9 is shown on the digital user interface, the battery is fully charged and can supply maximum power. When audible low battery alarm sounds and A0 flashes on the display, battery capacity has dropped below the required level to sustain the flow rate. Approximately 10-15 minutes remains before the 160l/min flow rate drops. 3M ™ Powered Air Turbo PF-600E (Proflow 2 SC 160)