AT2000-ATI

1. TECHNICAL DATA ______________________________________________________________________________ Version 11 AT2000 Anti Slip Tape General Description An aluminium oxide/silicon carbide abrasive grit bonded to a tough and d urable PVC backing with a solvent based acrylic adhesive and paper release liner.  Anti slip  Water resistant  UV resistant  Easily applied  Helps you meet statutory Health and Safety regulations  Durable  For indoor and outdoor use Te chni cal Details Typical Values Thicknes s 1.0mm Breaking load 40 N/cm Elongation 100% Adhesion Steel 4.0 N/cm RoHS compliant Yes Service Temperature - 5°C to +50°C Application Temperature +15°C to +40°C Storage Temperature +12°C to +25°C AFERA Association des Fabricants Européens de Rubans Auto - Adhésifs. NOTE Except where indicated otherwise, the figures stated are average values and should not be regarded as MAXIMUM or MINIMUM values for specification purposes. The Company reserves the right to improve products and any change in specification will result in a re - issu e of the relevant ‘Technical Data Sheet’. Customers should satisfy themselves that the tape is suitable for their requirements whether after such modifications or otherwise. Please check that you have the latest issue of the ‘Technical Data Sheet’. All sli tting and length tolerances are to British Standards. Before use the customer is advised to consult the Health & Safety Data Sheet produced by the company for this product, which is available on request. STORAGE Tapes stored below the minimum recommended temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.