AT500-ATI

1. TECHNICAL DATA ______________________________________________________________________________ Version 1 5 AT 500 40 Micron Aluminium Foil Tape General description A 40 micron aluminiu m foil, coated one side with a dispersion acrylic , pressure s ensitive adhesive. The tape is backed with a strong polythene coated release paper.  Flame retardant and self - extinguishing  Good high and low temperature resistance  Easy unwind and tear  Water resistant  Aggressive adhesive Specification Test certificate* available to show this foil tape meets the requirements of the following specifications:  BS476 Part 6 and Part 7 Category 1  Fire Class M1  Class O Te chni cal Details Typical Values Thickness 0.08 mm Breaking Load 22 N/cm Elongation 5 % Adhesion Steel 3.8 N/cm After Water Immersion 3.8 N/cm R oHS Compliant Yes Service Temperature - 4 0°C to + 11 0°C Application Tempe rature - 2 0°C to +40°C Storage Temperature +12°C to +25°C *Standard charge for certificate: £25.00. AFERA Association des Fabricants Européens de Rubans Auto - Adhésifs. NOTE Except where indicated otherwise, the figures stated are average values and should not be regarded as MAXIMUM or MINIMUM values for specification purposes. The Company reserves the right to improve products and any change in specification will result in a re - issue of the relevant ‘Technical Data Sheet’. Customers should satisfy themselve s that the tape is suitable for their requirements whether after such modifications or otherwise. Please check that you have the latest issue of the ‘Technical Data Sheet’. All slitting and length tolerances are to British Standards. Before use the custome r is advised to consult the Health & Safety Data Sheet produced by the company for this product, which is available on request. To achieve the best results ensure that surfaces are clean, dry and free from contamination before application. STORAGE Tapes s tored below the minimum recommended temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.