Datasheet Microflex 93-243

1. Extended chemical protection: MICROFLEX 93-243 gloves feature an extra-long cuff to shield more of your arm and provide excellent chemical splash protection — ideal for laboratory and pharmaceutical manufacturing, as well as food processing workers Reduced allergy risk: Manufactured without chemical accelerators, helping to protect users from Type IV skin allergies Ultra-long cuff design: MICROFLEX 93-243 gloves feature an elbow-length cuff designed to prevent roll-down and minimize the risk of cross- contamination Secure grip: The textured palm and fingers of these gloves results in a more confident, secure grip of instruments and glassware Product protection: To prevent contamination and protect product integrity, these gloves are packed in polybags 93-243 Disposable Nitrile Glove with 15.6" Extended Cuff Extra-long disposable gloves for superior product and worker protection ® ® Industries Food Processing Life Sciences Recommended For Enhanced tactile sensitivity and dexterity, especially for delicate procedures WWW.ANSELL.COM

2. K P T TECHNICAL DATA SHEET Product Information External Glove Surface Fully Textured Audit Standards ISO 9001 Product Certification Personal Protective Equipment Regulation (EU) 2016/425 Category III risks Packaging Overview 100 gloves per polybag 10 polybags per case 1000 gloves per case Storage Instructions Keep out of direct sunlight; store in a cool and dry place. Keep away from sources of ozone or ignition. Country Of Origin Malaysia Product Segmentation High Risk Antistatic Yes EN1149 Vulcanization Chemical Accelerators Zinc Dibutyldithiocarbamate (ZDBC) Zinc Diethyldithiocarbamate (ZDEC) Only a very small number of users may be sensitive to this ingredient(s) and hence may develop irritant and/or allergic contact reactions. PHYSICAL PROPERTIES Typical Values Testing Method Length (mm/inches) 395 / 15.6 ASTM D3767,EN 420 Freedom from Holes (Inspection level I) 1.5 AQL ASTM D5151,EN 455-1 Palm Thickness (mm/mils) 0.13 / 5.1 ASTM D3767,EN 420 Finger Thickness (mm/mils) 0.17 / 6.7 ASTM D3767,EN 420 BEFORE AGING AFTER AGING Ultimate Tensile Strength (MPa) ≥ 14 ≥ 14 ASTM D412 & D573 Elongation at Break (%) ≥ 500 ≥ 400 ASTM D412 Force at break (N) ≥ 6 ≥ 6 ORDERING INFORMATION Size S (6.5 - 7) M (7.5 - 8) L (8.5 - 9) XL (9.5 - 10) XXL (10.5 - 11) Product Code 93243070 93243080 93243090 93243100 93243110 Performance Standards and Regulatory Compliance Europe, Middle East & Africa Region Ansell Healthcare Europe NV T: +32 (0) 2 528 74 00 F: +32 (0) 2 528 74 01 Asia Pacific Region MY +603 8310 6688 apac.medical@ansell.com CN: +86 21 38275000 infochina@ansell.com JP: +813 5549 8151 info.medical.jp@ansell.com North America Region Ansell Healthcare Products LLC T: +1 800 800 0444 F: +1 800 800 0445 Latin America & Caribbean Region Ansell Commercial Mexico S.A. de C.V. T: +52 442 248 1544 / 248 3133 Australia Ansell Limited T: +61 1800 337 041 F: +61 1800 803 578 Russia Ansell PYC Ten. +7 495 258 13 16 For additional information visit us at www.ansell.com, or call us at Ansell, and ™ are trademarks owned by Ansell Limited or one of its affiliates. US Patented and US and non-US Patents Pending: www.ansell.com/patentmarking © 2022 Ansell Limited. All Rights Reserved. Neither this document nor any other statement made herein by or on behalf of Ansell should be construed as a warranty of merchantability or that any Ansell product is fit for a particular purpose. Ansell assumes no responsibility for the suitability or adequacy of an end user's selection of gloves for a specific application. ®