70001100-p06h-0118_sr_500_rev_16-datasheet

1. Head Office Factory Tel: +46 10 484 87 00 Tel: +46 10 484 87 00 Visiting address: Visiting address: Stockholmsvägen 33 Västergatan 4 SE-181 33 Lidingö SE-341 50 Lagan www.srsafety.com Product leaflet The SR 500 is a battery-powered fan that, together with a filter and an approved head top, is included in the Sundström fan-assisted respiratory protective device systems. The SR 500 can be used as an alternative to filter respirators in all situations in which these are recommended. This applies particularly to work that is hard, warm or of long duration. The human interface may consist of a hood, face shield, half mask or full face mask. The fan is equipped with a filter, and the filtered air is fed through a hose to the human interface. The pressure then generated prevents surrounding pollutants from penetrating into the mask. The characteristics of the SR 500 are as follows: The battery is of lithium-ion type • Two battery alternatives, i.e. STD (Standard 2.2 Ah) and HD (Heavy Duty 3.6  Ah) • The charging time for the Standard battery is around 1.5 hours and for the Heavy Duty battery, about 2 hours • Equipped with two filters/combined filters • Operating time of up to 12 hours • The same control is used for starting, stopping and selection of operating status • Display with symbols • Equipped with automatic air flow control with compensation for air pressure and temperature • Can be used together with hoods SR 520, SR 530, SR 561, SR 562, SR 601, SR 602 face shield SR 540, SR 570, half mask SR 900, full face mask SR 200, welding shield SR 590, SR 592, helmet with visor SR 580 or welding shield/helmet with visor SR 584/SR 580. Electronics ingress protection is approved in IP class IP67 according to IEC / EN 60529. The SR 500 is also available in an explosion-protected version designated the SR 500 EX for use in a potentially explosive atmosphere. See the separate product leaflet. P06H-0118 Rev 16 20190816 Product Model No. Ordering No. Powered air purifying respirator SR 500 H06-0112 Product Description Technical specification SR 500 EN 12941:1998 + EN12942:1998 + A2:2008 A2:2008 Air flow, min/max 175/240 l/min ≥ 120 l/min - STD-battery/HD-Battery 14.8V, 2.2 Ah/3.6 Ah - - Operating times at 175/240 l/min: P3, STD-battery 7 h/4 h ≥ 4 h ≥ 4 h P3, HD- battery 12 h/7.5 h ≥ 4 h ≥ 4 h Weight with STD-battery and P3 filter ≈ 1 350 g ≤ 3,500 g ≤ 3,500 g Service conditions -10 °C to +55 °C, < 90 % RH, 600 to 1200 hPa - - Storage conditions -20 °C to +40 °C, < 90 % RH - - Low flow warning level < 175 l/min ≤ 175 l/min ≤ 175 l/min Assigned Protection Factor¹: SR 520, SR 530, SR 540, SR 561/562, SR 580, SR 584, SR 590, SR 601, SR 602 40 (TH3) - - Assigned Protection Factor¹ SR 200 40 (TM3) - - Nominal Protection Factor 2 SR 520, SR 530, SR 540, SR 561/562, SR 580, SR 584, SR 590, SR 601, SR 602 500 (TH3) - - Nominal Protection Factor 2 SR 200 2000 (TM3) Approvals EN 12941:1998 + A2:2008 - - EN 12942:1998 + A2:2008 1) Specified in BS 4275 and applies generally to all approved fan-assisted respiratory protective devices, regardless of the test results. 2) According to EN 529:2005. 1(2)

2. www.srsafety.com Head-tops, spare parts and accessories Item No. Part Ordering No. 1 . Hood SR 520 M/L H06-0212 1. Hood SR 520 S/M H06-0312 2. Hood SR 530 H06-0412 3. Face shield SR 540 H06-0512 4. Face shield SR 570 H06-6512 5. Full face mask SR 200, PC visor H01-1212 5. Full face mask SR 200, glass visor H01-1312 6. Full face mask SR 200 Airline, PC visor H03-1012 6. Full face mask SR 200 Airline, glass visor H03-1212 7. PU hose SR 550 for SR 200 T01-1216 7. Rubber hose SR 551 for SR 200 T01-1218 8. SR 900 S H01-3012 8. SR 900 M H01-3112 8. SR 900 L H01-3212 9. Hose SR 951 T01-3003 10. Twin hose SR 952 R01-3009 11. Hood SR 561 H06-5012 12. Hood SR 562 H06-5112 13. Welding shield SR 590 H06-4012 14. Welding shield SR 592 H06-4412 15 . Helmet with visor SR 580 H06-8012 16. Welding shield/Helmet with visor SR 584/SR 580 H06-8310 17 . Hood SR 601 H06-5412 17 . Hood SR 602 H06-5512 18. Flow meter SR 356 R03-0346 19. Steel net disc SR 336 T01-2001 20. Asbestos Kit SR 509 T06-0105 21. Battery SR 501, 2,2 Ah R06-0108 21. Battery HD SR 502, 3,6 Ah T06-0101 22. Battery charger SR 513 R06-0103 23. Charging station without chargers SR 506 T06-0108 23. Charging station, complete SR 516 T06-0111 24. Belt SR 508 R06-0101 24. Rubber belt SR 504 T06-0104 24. PVC belt T06-0124 25. Leather belt SR 503 T06-0103 26. HD belt SR 553, standard T06-0119 26. HD belt SR 553, large T06-0120 27. Harness SR 552 T06-0116 28. Fan SR 500, bare R06-0110 29. Splash cover SR 514 T06-0114 30. Storage bag SR 505 w two compartments T06-0102 31. Pre-filter holder SR 512 R06-0106 32. Pre-filter SR 221 H02-0312 33. Particle filter P3 R, SR 510 H02-1312 34. Filter adapter SR 511 R06-0105 35. Pre-filter holder for SR 710 R01-0605 36. Particle filter P3 R, SR 710 H02-1512 37. Gas filter A2, SR 518 H02-7012 38. Gas filter ABE1, SR 515 H02-7112 39. Gas filter A1BE2K1, SR 597 H02-7212 40. Combined filter A1BE2K1-Hg-P3 R, SR 599 H02-7312 41. Hose SR 541 for SR 540 R06-0501 42. O-ring for breathing hose R06-0202 43. Flat gasket for hose SR 541 R06-0506 44. Gasket for fan R06-0107 45. Plug kit R06-0703 2(2) 13 14 16 20 11 12 1 2 3 4 9 10 18 24 25 26 21 22 22 30 29 28 45 8 27 19 33 35 37 39 40 38 36 34 32 31 44 42 41 43 15 5 6 7 17