Vactaco Topfix Guardrail Technical Datasheet

3. • • • • • • • • • • • • • • • • • • • • • • • • •• • • ••••••• • • • • • • • •• • •• • • • • • • • •• • • •• • • • •••• • • • • • • •• • • •••• • • • • •• •• • • • • •• • • • • • •• • • • • • • •• • • •••• • •• • • • ••• • •• • • • ••• • •• • • • •• • •• • •• • • • • •• • • • • • • •• • • •• • •• • •• • • • •• • • • • • •• •• • ••• • • •• • •• • •• • • •• • • •• • • • •• • • • •• • • •• • ••• • • • •••• • •• • • • •• • •• • • •• • • • ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• • • • • • • • • • • • • • • • • • • • • • • • A B C B C D D D B D B C C A ALSOLU - 89 rue Florent Evrard, 42100 Saint-Etienne - FRANCE Tél : +33 (0)4 77 47 45 00 - Fax : +33 (0)4 77 47 45 01 - Mail : devis@alsolu.com - Site web : www.alsolu.com 01102020 PRODUCT DATA SHEET VECTACO ® > COLLECTIVE PROTECTION – GUARDRAIL > GUARDRAIL WITH FLOOR FIXTURE SYSTEM Ref.: VS SEALING KIT A : 1 x rubber seal (cut to the shape of the base to be placed between the base and its support). B : 2 x rubber washers . C : 2 x wide washers M10. D : 2 x H M10 nut covers. USE (see technical manual) KIT COMPOSITION The VECTACO ® sealing kit for guardrail with floor fixture sys - tem (Ref.: VSKE) is composed of rubber seals and washers. Associated with a chemical seal fixing (not supplied), it insures watertightness and prevents infiltration into the concrete sup - port. top fix base H M10 nut Wide washers M10 Washers rubber Seal under base H M10 nut covers Sealed support Chemical sealing (recommended) upright Drilling of water discharge seal and nut covers. Page3 ALSOLU - 89 Rue florent Evrard - 42100 SAINt-ETIENNE - FRANCE Tel. : +33 (0)4 77 47 45 00 - Fax. : +33 (0)4 77 47 45 01 - info@alsolu.com - www.alsolu.com

1. ALSOLU - 89 rue Florent Evrard, 42100 Saint-Etienne - FRANCE Tél : +33 (0)4 77 47 45 00 - Fax : +33 (0)4 77 47 45 01 - Mail : devis@alsolu.com - Site web : www.alsolu.com 01102020 PRODUCT DATA SHEET VECTACO ® > COLLECTIVE PROTECTION – GUARDRAIL > GUARDRAIL WITH FLOOR FIXTURE SYSTEM Ref.: VS GUARDRAIL WITH FLOOR FIXTURE SYSTEM (TOP FIX) The guardrail with floor fixture system VEC - TACO ® is a collective fall protection system (French style fixation) on metal structure, on wall parapet, on concrete wall or on concrete slab without sealing. The floor fixture system remains the more economical solution to se - cure the flat roof. > Economical > Simple and fast assembly thanks to its interlocking handrails and knee rails with swaged ends, easy to nest > Handrails and knee rails in lengths of 3 m, conditioned by 7 to facilitate their distribution and their installation on flat roofs > Available in stock, short lead time VECTACO ® straight guardrail with floor fixture system top fix base USE (see technical manual) ADVANTAGES Page1 Upright/handrail connection system: the triangular handrail and T part are substituted by a round handrail and a plug at the top of the upright (delivered unassembled). This change leads to the following product modifications: - New corner angles (plastic and ALU) for round handrail; - New plug for round handrail; - Uprights: notch at the top to receive the handrail + pre-drilled holes to facilitate the assembly of the handrail and knee-rail. NEW NORMES NF EN ISO 14122-3 NF E85-015 : 2019 NOUVEAU EVOLUTION PRODUIT STANDARD EN ISO 14122-3 NEW EVOLUTION PRODUCT ALSOLU - 89 Rue florent Evrard - 42100 SAINt-ETIENNE - FRANCE Tel. : +33 (0)4 77 47 45 00 - Fax. : +33 (0)4 77 47 45 01 - info@alsolu.com - www.alsolu.com

2. 500 mm max 500 mm max 500 mm max 500 mm max 30° 133 mm 75 mm 120 mm 90 mm 133 mm 125 mini A ALSOLU - 89 rue Florent Evrard, 42100 Saint-Etienne - FRANCE Tél : +33 (0)4 77 47 45 00 - Fax : +33 (0)4 77 47 45 01 - Mail : devis@alsolu.com - Site web : www.alsolu.com 01102020 PRODUCT DATA SHEET VECTACO ® > COLLECTIVE PROTECTION – GUARDRAIL > GUARDRAIL WITH FLOOR FIXTURE SYSTEM Ref.: VS GUARDRAIL WITH FLOOR FIXTURE SYSTEM (TOP FIX) Divisible plastic shims that allow compensating for irregularities of the support (supplied on request). TECHNICAL CHARACTERISTICS - Max spacing between uprights: 1500 mm - Handrails and knee rails adjustable to fit - Handrails and knee rails swaged ends and adjustable - Assembly with HC screws and self-drilling screws - Fixation minimum at 60 mm of the edge of the parapet - Width minimum of the acrotère: 125 mm - Height parapet ≤ 100 mm = Compulsory toeboard - In case of use of folding amounts, a Vectaline ® lifeline is mandatory to secure the movements of the installers. ATTENTION: before any use, please refer to the corresponding technical manual. ASSEMBLY RECOMMENDATIONS (see technical manual) DIMENSIONS Terrace side ADJUSTING SHIM Following page: Sealing kit Dimensions de l’embase : water discharge Page2 - Material: aluminium - Material finishes: raw, anodized or powder coated on request (RAL colours) - Components: round handrails Ø 45 mm, round knee rails Ø 35 mm, tubes with swaged ends and adjustable angles for han - drails and knee rails. - Fixation: 2 x M10 plugs (in option) Straight upright 30° inclined upright (other angle on request) Curved upright Folding upright VS-D1 VS-D2 VS-D3 VS-I1 VS-I2 VS-I3 VS-I4 VS-C1 VS-C2 VS-C3 VS-C4 VS-R1 VS-R2 VS-R3 1: handrail / 2: handrail + knee rail / 3: handrail + knee rail + toeboard / 4: handrail + 2 knee rails + toeboard REFERENCES Dimensions of the uprights 1000/1100 mm (NF) 1100 mm (EN) Straight Inclined Curved Folding ALSOLU - 89 Rue florent Evrard - 42100 SAINt-ETIENNE - FRANCE Tel. : +33 (0)4 77 47 45 00 - Fax. : +33 (0)4 77 47 45 01 - info@alsolu.com - www.alsolu.com