BLS 441 tds

3. BLS 441 ABEK2HgNO20COP3 R FILTERS WITH UNIVERSAL CONNECTION RD40 TYPES OF FILTERS COMPATIBLE DEVICES IMPORTANT BLS declines any responsibility, direct or indirect, from any misuse of both devices and instructions. User is responsible for the determination of pro - duct compliance with the intended use. SELECTION GUIDE CLAS S • Determines the duration of the filter: • Class 1 = 1000 ppm, Class 2 = 5000 ppm COLOUR CODES A - Organic gases and vapours (Boiling point > 65°C) B - Inorganic gases and vapours E - Acid gases and vapours K - Ammonia and derivatives AX - Organic gases and vapours (Boiling point < 65 ° C) Hg - Mercury vapour NO - Nitrous gases CO - Carbon oxide Reaktor - Radioactive iodine (including radioactive iodomethane) P - Dusts TRANSPORT CODE MODEL PROTECTION WEIGHT (g) ± 3 Q.TY/BOX Q. Q.TY/CARTON CARTON WEIGHT (Kg) ± 0,1 8117004 BLS 441 ABEK2HgNO20COP3 R ~ 470 1 18 10,3 COMBINED BLS 5000 SERIES BLS 3000 SERIES

1. BLS 441 ABEK2HgNO20COP3 R FILTERS WITH UNIVERSAL CONNECTION RD40 P 1/ 3 BLS 441, as well as all filters of BLS 400 series, has a universal connection and it is compatible with all respiratory protective devices with EN148-1 connection. ACTIVE CARBON BLS uses high quality activated carbons for the filtration of gases and vapours to ensure excellent filtration performance. DUST FILTER Filtering efficiency is 99.99%. FILTER CANISTER The casing is made entirely of aluminium to ensure mechanical strength, allowing total control over the compression of the carbon grains contained and is heat resistant. Air passages are completely avoided making the filter 100% safe. UNIVERSAL CONNECTION BLS 400 series filters are equipped with a standardised thread according to EN 148-1, which is universal for respiratory protective devices.

2. TDS-BLS441-FILTER_UNIVERSAL-EN BLS 441 ABEK2HgNO20COP3 R FILTERS WITH UNIVERSAL CONNECTION RD40 P 2/ 3 TECHNICAL DATA CERTIFICATIONS BLS filters are: • Certified according to European Regulation 2016/425 (Personal Protective Equipments) • Certified as PPE of III category, in presumption of conformity to harmonized standard EN 14387:2004 + A1:2008 and DIN 58620 (20 CO class). • Certified and controlled according to Annex D by Italcert S.r.l. (Notified Body n°0426) • CE marked BLS management system is ISO 9001 certified MODEL PROTECTION TYPE SINGLE PACKED NPF (full face masks) CONNECTION BLS 441* ABEK2HgNO20COP3 R Combined* 1000*TLV EN 148-1 (Universal) (TLV) Threshold Limit Value (NPF) Nominal Protection Factor * this filters cannot be used with half masks because their weight combined is more than 300g A = Organic gases and vapours AX = Organic gases and vapours (Boiling point < 65 ° C) B = Inorganic gases and vapours E = Acid gases and vapours K = Ammonia and derivatives Hg = Mercury vapour NO = Nitrous gases CO = Carbon oxid (20 min duration) P = Dusts MATERIALS FILTER’S CANISTER Aluminium with plastic caps DUST FILTERING MATERIAL Pleated fiber mesh GASES AND VAPOURS FILTERING MATERIAL Activated carbon grains SHELF-LIFE 5 years TEMPERATURE 0°C/+50°C RELATIVE HUMIDITY 80% max STORAGE